I'm using Ceratec on my 2021 Honda City 5th Gen ZX CVT which has done 26k kms till date. It has made a huge difference in toning down the engine vibration which is now almost non existent, reduced tappet valve noise and even improved the mileage by 1.5 - 2 kms/ltr. in Mumbai traffic. I can vouch that it even makes a difference in new engines and lesser friction should translate into longer engine life!!
@@pramodaswal1589 My car is still under warranty hence it only goes to Honda Workshop for oil changes and they use only Idemitsu brand of engine oil so I've haven't had the chance to try out anything else but my sense is if you are going to add Ceratec it might be an overkill to also use the Molygen engine oil.
@@systrondatarecoverylabhubb4658 If reducing metal to metal friction and its associated benefits works for you then Ceratec should be on your list - at least that's what I've realised after using it. I've been using other engine additives for the past 25 yrs, much before I discovered Ceratec and those were Teflon based additive and it had worked miracles for me. I've even driven a dry engine when accidentally all my engine oil got drained and the warning light failed yet the engine remained unharmed.
I used Ceratec for twice on same car, I think it is very nice product if you want engine longevity and i observed that after using it, my car is providing more performance in terms of pick up. Though I didn't noticed the change in mileage! But, yah! I definitely recommend Ceratec, it's costly but it's worth it!
I'm using Ceratec since 2015 in my cars (all diesel). It's an excellent product and worth every penny. It's selling really cheap now, otherwise I use to buy it for ₹2400+ approx earlier. Ceratec takes 500 to 1000 kms to set the ceramic coating properly inside engine cylinder walls. It makes the car very smooth, reduce engine noise, protection to engine by reducing friction, but increase in mileage is not much a difference. It's better to use Ceratec as early as possible when the car is new. Ceratec lasts for 50000 kms in single bottle use. It's a highly recommended product for a car enthusiast.
@@manish4583 On oil change or flush, it stays inside the engine, as it forms a ceramic coating on cylinder walls and other metal surfaces. It remains upto 50000 kms as per Liqui Moly.
@@manish4583 yes definitely it's recommended from my side. Its my personal experience, it easily lasts until 40-50,000 kms range. In my case I use 100% pure synthetic oil and put ceratec after every 45000 kms. Also oil flush is not required on every oil change, specially when you are using pure synthetic oil. Just change the oil on regular time interval as per car's service manual.
Hello Sir , I am driving a Hyundai i20 Petrol 1.2 ltr MT (2023) clocked around 3400 kms I know I am using this ceretec way more early just thought to give my car extra pre caution and care. As per the guidelines which are written this product can be used with the engine oil as well as with the transmission oil. So my question is can we use it while changing the gear oil/transmission oil in the gear box along with the engine oil while pouring in engine head. I have been searching for these answers for a long time but not getting any suitable reply or help could you please suggest. Thank you in advance ❤
I dont think ki kuchh pta chal skta h. Kyuki aapki car 10000 kms chali thi to jo first oil tha wo kafi purana ho gya tha so performance ya mileage alg hoga, and ab new oil k sath alg rahega. Isme liqymoli ko kese koi judge kr skte h
Kisi bhi New car ko shyad jaruri nahi hai diesel or petrol. Use karna hai to old diesel car pe try karo, lekin sab se pehele diesel car ka EGR,Turbo, injector, catalic convertor, ingine mouting, wheel bering,tyre pressure. Ye sab proper hone ke baad hi hame cera Tec pe jana chahiye
For Diesel engine use "amsoil all in one diesel" for every two interval of full fuel tank, this keeps fuel injectors very clean and allow full combustion.
Hi, Need advice, I own a 2013 model Petrol Wagon-r, and odometer has clocked 55000 Km. After seeing this video I want to use this product, do you suggest this product for Wagon-r. and how much quantity of Ceratec should I use, and I use normal mineral engine oil. Thanks in advance
Dont waste money on it, used it on hyundai venue diesel for 9000km, no increase in mileage, power. Ocassionally felt engine was smoother...or it was just in my head.
Sir brezza me jaise 3.3 litre engine oil ata h to kya agr hum ceratec use krre h to engine oil 3 litre or 300ml ceratec ya fir 3.3 litre engine oil and uske upar 300 ml ceratec. Agr second option aapka answer h to sir kya fir engine me total lubricant 3.6 litre nhi ho jaega jo ki maximum se bhi jada h. Please sir ye query clear kr dijiyega
Hello, I have used LIQUI MOLY Ceratec 5 times in my i10 2013 model petrol engine, it has given the best performance. My i10 has run 285000 km till 2024, & clear and smooth engine sound at all. 1 time filling full CNG then 350 kilometers run. The ceratec product is so excellent work
I am using it my swift petrol car which is runnig 85k km. After that i am using this and now i am expreiance like a new car totally silent engine n smooth Good job ceratec.
Sir Meri car 2013 Suzuki Ritz VDi Diesel hai. Car runing 1,40,000 km ho chuka hai, toh ab car servicing ke time aa chuka hai. Toh car servicing ke time pe Liqui Moly Flush kar ke yeh Liqui Moly Ceratech use kiya toh chalega ?
Also... This should kind of additive should be used only after running engine for 50000km not before that... Before 50k ur engine don't need ceramic coating or polishing and all that
@@mohit12322 i dont have time to find. But after too much of time spend.. I belive using ceratec only after 50k is advices... Before that engine is brand new and runs too good with stand 0w20 oils or 5w40 U can try total quartz oil nfc 9000 0w20 It's super smooth
Hi sir, I have bought a Brezza almost covered 1000kms. If I add liquid ceratec now, will there be any problem or warranty issues? Looking for your positive response. 🙏
Sir, Meri gadi bs6 hain.....around 10k kilometres ho Gaye Hain....Ceratek dalna chahiye? Or injector cleaner dalu....gadi highway PE run hota hai... service ho gayi hain
Liquimoly ceratec is super product and i advise to add it. New vehicle after running 15k kms pls use Liquimoly engine flush then top up with Amsoil signature series engine oil with ceratec definitely will find the huge difference in acceleration, engine operating system.
Sir i used ceratec my last engine oil change time so now i changed my car oil can we add this or not.can we use another product on this like mos2 ,oil treatment. Pls relpy
Can I use it for my Altroz petrol DCA? I read that It should not be used in wet clutch systems. Im not sure weather altroz wet clutch is actually clutch bathed in engine oil or has seperate oil chamber
Ceratec dala tha maine bhi apne ford ecosport petrol me and 1000 KM ke baad jab mene oil check kara to brown dikha, kya yeh normal hai? Kyuki certac ki bottle me bhi chocolate brown color ka tha liquid
Mane verna fluidic diesel me us kiya he mileage me koi fark nahi pada he thodi sa nois level kam hua he bt price ke hisab se Jesa socha vesa fark nahi laga west of money
Wse service huyi h abhi, filter badle, oil change hua farak uska bhi hoga ..... Second base is vfm all the necessary fequtes thqt too company fitted. Dashcam lga liya aapne and i think that is enough ...... Delhi gate the aap , karo bagh k modification ka review bhi dena tha bhai ji .... Eddy ko hello bolna 😊
Great video sir, can i use ceratec in new car. My car run only 1000 km . Pls suggest after how much kilometer use this product for better result And pls give me ur feedback after five month.
I used it nios after 1st oil change. Noise wise not much difference as engine was already too refined but it helped in improving acceleration by some extent.
It is common practice for vehicle owner to give the best to the vehicle so do I. But when the company is not recommending additives for a new vehicle which is very refined natural aspirated engine, the why people go for additives.
Better do engine flush before adding ceratec. I also did engine flush at 87000 kms before adding ceratec. Later added ceratec with Addinol engine oil. Mine is diesel i20
Ceratec is for older engines and helps in restoring cylinder surface finish for some time. Not sure why it is being tried with a new engine. Benefits will be zero or very low to be very honest.
Please try it yourself and then comment. Try to refrain from passing judgement on things you have no first hand experience, thereby misleading others. I do not work for Liqui Moly but I've seen the benefits on a new engine. I first poured it when my car had run only 15k kms (ie. after my second engine oil change).
@@sudiptakiran That is why I said, the benefits will be zero or very low on new engines. Major benefits can be felt with older engines. I have used it on my old City with 75000+ kms.
@@sankyppp I beg to differ with your opinion as I would much rather minimize wear and tear on a new engine and keep it like new for a longer duration rather than let the normal wear and tear happen in a new engine and then when it's old use an additive. No additive will add metal to worn out cylinder walls, piston rings, bearing etc to make an older engine new again, so why not instead reduce the metal to metal friction in a new engine and make it last longer like new. My experience with Ceratec on a new engine has been much more than what I expected.
@@sudiptakiran When to use Ceratec will depend on its actual function, rather than the perceived function. If it is just a friction reduction additive, then it will make sense for newer engines. If its an additive with ceramic nano particles, then it will restore the surface of parts in older engines by filling ceramic particles in holes and rough surfaces. It cannot work the same in both cases.
These additives are NOT required for Petrol engines (especially Suzuki ones) Suzuki K15B/K15C engines require 0W16 Engine Oil. Just stick to that and change oil every 10K kms to keep the engine healthy. Diesel Engines are different, produce more carbon as Diesel is unrefined and require decarbonisation. Suzuki/Fiat engines require 5W30 engine oil and some prefer additives for Diesel Engines.
Sir mere pas bhi brezza hai jo 2 month old hai or pehle din se hi 1st or 2nd gear shifting ke time background mein ek bhari c noise aati hai company or service center valo ko problem to samajh aa gai lekin koi solution nahi kar paa rahe, Maine ye questions pehle bhi pucha tha aapse, kindly koi solution aap hi dedo ki Mai kya karu? please
Sir ji service centre ne clutch bhi change karke dekh liya lekin problem vesi ki vesi hai Mai Punjab,Patiala se hoon, kya apka thoda sa time mil skta hai? Muje lgta hai ye solution aap hi kar sakte ho
I own Hyundai Venue 1.2 petrol MT. when I drive my car and i put in neutral while the vehicle is moving the rpm fluctuates from 750 to nearly 2200 and sometimes more but never gets below 750 keeps fluctuating in moving neutral car but in idle it's quite stable. I got it checked from Hyundai authorised service centre they scanned the car and took a road test also and at last they said it's normal it is nothing to worry about but it doesn't seem normal for me can u please confirm if its normal or not if not then what could be the possible cause for the same
Sir mujhe lagta he aap kuch jyada hi low rpm par chala rhe ho mileage ke chakkar me to car ka wear jyada ho rha he kyo ki oil circulate nahi ho raha thik se....itani jaldi gadi la mileage or pickup kese drop ho sakta he? Vo bhi maruti engine ka
Meri brezza hybrid 18kmpl de rhi 3Rd service ke bad ❤ me hard drive krta hu 🗿 acha milange hai phle 16 ka deti thi ab 19-20 kmpl de degi ager me light foot chalau
@@Jatin__Arora ye to mujhe nhi malum par m.i.d me 18kmpl batati hai real life milege 14-15 ka hi aatà hài without AC ka bata rha hu with AC 15-16 kmpl M.i.D shown
@@rahulsinghrawat2700 bas phr 0w16 hi dala hoga jo Maruti ka recommended hai, bhht videos me dekha maine 5W30 daal rahe hai jo koi 2500 le raha hai koi 1800 to koi 3200 le raha hai sirf oil k
you don't need this CERATEC product, if you regularly maintain your car engine with a good quality synthetic oil, because this product shows its effect really fast but it's effect gone also very fast, only 5000km and after that you feel nothing special in your car's engine, may be you feel it's effect till your car's next service date but after oil change it's effect completely gone. liqui moly says that it's last for 50000km which is totally marketing gimmicks. so if you can buy ceratec on every service of your car then you can go with it and you will feel it's effect but if you think that its one time investment then may be you will be wrong or will be feel regret.
गाड़ी पर सबसे ज्यादा अनुसंधान गाड़ी उतारने वाली कंपनी करती है। ऐसा मेरा विश्वास है कि अगर हम केवल गाड़ी के owners book में लिखे हुए service schedule/oil etc का ही अनुसरण करे तो गाड़ी में कोई समस्या नहीं आनी चाहिए।
I'm using Ceratec on my 2021 Honda City 5th Gen ZX CVT which has done 26k kms till date. It has made a huge difference in toning down the engine vibration which is now almost non existent, reduced tappet valve noise and even improved the mileage by 1.5 - 2 kms/ltr. in Mumbai traffic. I can vouch that it even makes a difference in new engines and lesser friction should translate into longer engine life!!
Would you recommend adding ceratec with Liqui moly Molygen engine oil?
@@pramodaswal1589 My car is still under warranty hence it only goes to Honda Workshop for oil changes and they use only Idemitsu brand of engine oil so I've haven't had the chance to try out anything else but my sense is if you are going to add Ceratec it might be an overkill to also use the Molygen engine oil.
@@sudiptakiran thanks much 👏. I also own a 4th gen city diesel.
My honda city 2018 IVtec model, 77000 km running,
Shall i use ceratec any benefit for my car???
@@systrondatarecoverylabhubb4658 If reducing metal to metal friction and its associated benefits works for you then Ceratec should be on your list - at least that's what I've realised after using it. I've been using other engine additives for the past 25 yrs, much before I discovered Ceratec and those were Teflon based additive and it had worked miracles for me. I've even driven a dry engine when accidentally all my engine oil got drained and the warning light failed yet the engine remained unharmed.
I used Ceratec for twice on same car, I think it is very nice product if you want engine longevity and i observed that after using it, my car is providing more performance in terms of pick up.
Though I didn't noticed the change in mileage!
But, yah! I definitely recommend Ceratec, it's costly but it's worth it!
जयश्री निमकरोली बाबा मै महाराष्ट्र से हुं मै ब्रीजा सीएनजी लेने वाला हू आप बहुत अच्छी जानकारी देते है धन्यवाद 🙏
🙏🙏
I'm using Ceratec since 2015 in my cars (all diesel). It's an excellent product and worth every penny. It's selling really cheap now, otherwise I use to buy it for ₹2400+ approx earlier. Ceratec takes 500 to 1000 kms to set the ceramic coating properly inside engine cylinder walls. It makes the car very smooth, reduce engine noise, protection to engine by reducing friction, but increase in mileage is not much a difference. It's better to use Ceratec as early as possible when the car is new. Ceratec lasts for 50000 kms in single bottle use. It's a highly recommended product for a car enthusiast.
What if u change engine ojl Or flush the engine oil? Does ceratec still stays or gets removed when u change engine oil or flush it?
@@manish4583 On oil change or flush, it stays inside the engine, as it forms a ceramic coating on cylinder walls and other metal surfaces. It remains upto 50000 kms as per Liqui Moly.
@@rahulgoel05 this is being told by liqui moly, but have u experienced it too? Will u recommend others to use it for small cars like i20, baleno?
@@manish4583 yes definitely it's recommended from my side. Its my personal experience, it easily lasts until 40-50,000 kms range. In my case I use 100% pure synthetic oil and put ceratec after every 45000 kms. Also oil flush is not required on every oil change, specially when you are using pure synthetic oil. Just change the oil on regular time interval as per car's service manual.
@@manish4583 Bhai ek bar use karke to dekho... you'll surely get addictive to the Ceratec!
Ceratec vs. mos2 (both liqui moly) kaunsa kab dalna chahiye aur oil change par ceratec dubara dalna padega?
Hello Sir ,
I am driving a Hyundai i20 Petrol 1.2 ltr MT (2023) clocked around 3400 kms I know I am using this ceretec way more early just thought to give my car extra pre caution and care. As per the guidelines which are written this product can be used with the engine oil as well as with the transmission oil.
So my question is can we use it while changing the gear oil/transmission oil in the gear box along with the engine oil while pouring in engine head.
I have been searching for these answers for a long time but not getting any suitable reply or help could you please suggest. Thank you in advance ❤
I dont think ki kuchh pta chal skta h. Kyuki aapki car 10000 kms chali thi to jo first oil tha wo kafi purana ho gya tha so performance ya mileage alg hoga, and ab new oil k sath alg rahega. Isme liqymoli ko kese koi judge kr skte h
New oil hi h last service 10k pr new oil k saath liqi moly bhi dala gya tha
This is good if your car is old , new engine don’t need these additive ( for mind satisfaction even I use in petrol thar )
Pehle decide krlo tum support karna h ya nhi, zaroorat bhi nhi h lekin daloge bhi lolll
@@lostfrequencies1015 Guruji new engine me itna difference nhi pata chalta jitna old engine me effect aata h
@_hello._.world_ I love my cars , I use whichever best engine oil / additive available in market .
@@onlyonerohit interesting 🤔
Liqvi moly ka fual injector cleaner kitane kilomiter ke bad dalna chahiye....new car 🚗 bs6 engine hai
Kisi bhi New car ko shyad jaruri nahi hai diesel or petrol.
Use karna hai to old diesel car pe try karo, lekin sab se pehele diesel car ka EGR,Turbo, injector, catalic convertor, ingine mouting, wheel bering,tyre pressure. Ye sab proper hone ke baad hi hame cera Tec pe jana chahiye
For Diesel engine use "amsoil all in one diesel" for every two interval of full fuel tank, this keeps fuel injectors very clean and allow full combustion.
Hi, Need advice, I own a 2013 model Petrol Wagon-r, and odometer has clocked 55000 Km. After seeing this video I want to use this product, do you suggest this product for Wagon-r. and how much quantity of Ceratec should I use, and I use normal mineral engine oil. Thanks in advance
Dont waste money on it, used it on hyundai venue diesel for 9000km, no increase in mileage, power. Ocassionally felt engine was smoother...or it was just in my head.
Sir brezza me jaise 3.3 litre engine oil ata h to kya agr hum ceratec use krre h to engine oil 3 litre or 300ml ceratec ya fir 3.3 litre engine oil and uske upar 300 ml ceratec. Agr second option aapka answer h to sir kya fir engine me total lubricant 3.6 litre nhi ho jaega jo ki maximum se bhi jada h. Please sir ye query clear kr dijiyega
भाईसाहब यह बताओ brezza cng में ले या पेट्रोल में ।
गाड़ी रनिंग ज्यादा नही है ।
कोनसी गाड़ी लेनी सही रहेगी ।
Petrol lo sir tension free
@@TechnicalGyan1919 धन्यवाद 🙏
Hello, I have used LIQUI MOLY Ceratec 5 times in my i10 2013 model petrol engine, it has given the best performance. My i10 has run 285000 km till 2024, & clear and smooth engine sound at all. 1 time filling full CNG then 350 kilometers run. The ceratec product is so excellent work
Brother my car BREZZA 2023 CNG compny fited
Can i use ceratec in my cng engine?
Please answer
best performance ,Yes
I am using it my swift petrol car which is runnig 85k km. After that i am using this and now i am expreiance like a new car totally silent engine n smooth Good job ceratec.
Sir Meri car 2013 Suzuki Ritz VDi Diesel hai. Car runing 1,40,000 km ho chuka hai, toh ab car servicing ke time aa chuka hai. Toh car servicing ke time pe Liqui Moly Flush kar ke yeh Liqui Moly Ceratech use kiya toh chalega ?
Also... This should kind of additive should be used only after running engine for 50000km not before that... Before 50k ur engine don't need ceramic coating or polishing and all that
@@NikhilDangui Buddy can you share some relevant articles regarding the same ?
@@mohit12322 i dont have time to find. But after too much of time spend..
I belive using ceratec only after 50k is advices... Before that engine is brand new and runs too good with stand 0w20 oils or 5w40
U can try total quartz oil nfc 9000 0w20
It's super smooth
Hi sir,
I have bought a Brezza almost covered 1000kms. If I add liquid ceratec now, will there be any problem or warranty issues? Looking for your positive response. 🙏
Hello sir pahle aap car me ac use krte they ab winter me ac band hai isska bhi to performance or mileage ka resaon ho skta hai
Sir, Meri gadi bs6 hain.....around 10k kilometres ho Gaye Hain....Ceratek dalna chahiye? Or injector cleaner dalu....gadi highway PE run hota hai... service ho gayi hain
Liquimoly ceratec is super product and i advise to add it. New vehicle after running 15k kms pls use Liquimoly engine flush then top up with Amsoil signature series engine oil with ceratec definitely will find the huge difference in acceleration, engine operating system.
Liqvi moly ka fual injector cleaner kitane kilomiter ke bad dalna chahiye....new car 🚗 bs6 engine hai
Sir,
Can you recommend it for brezza...
Kya Use karna chaiye?
Hello sir, can i use it after 15-20 days of service?
Sir i used ceratec my last engine oil change time so now i changed my car oil can we add this or not.can we use another product on this like mos2 ,oil treatment. Pls relpy
Which engine oil do you use, synthetic, semi synthetic or normal…
Can I use it for my Altroz petrol DCA? I read that It should not be used in wet clutch systems. Im not sure weather altroz wet clutch is actually clutch bathed in engine oil or has seperate oil chamber
ITS DRY, DONT WORRY
Only bikes are wet clutch system, cars are dry and even scooters are dry clutch
Is it compatible with Nexon?
Can we use this on Xuv700 automatic petrol?
Ceratec dala tha maine bhi apne ford ecosport petrol me and 1000 KM ke baad jab mene oil check kara to brown dikha, kya yeh normal hai? Kyuki certac ki bottle me bhi chocolate brown color ka tha liquid
Should I had to do engine flush before adding it, my car has done 88k kms.
Its always better to do engine flush every 2-3 years. and definitely before adding additive
Sir pls make long term review of Ceratec. Also pls suggest if it can be used for xuv 300/ 3xo.
Sir tata punch me ceratech daal sakte h kya?
Whatever engine oil you use, make sure that it has Flash point of 220 or above (excellent if 240+)
Can I use it in scorpio n petrol
Bhai traffic jam mai headlight upper mai kau rakhna hai dipper pe rakho samne wale ko taklif hoti hai
Mane verna fluidic diesel me us kiya he mileage me koi fark nahi pada he thodi sa nois level kam hua he bt price ke hisab se Jesa socha vesa fark nahi laga west of money
Wse service huyi h abhi, filter badle, oil change hua farak uska bhi hoga ..... Second base is vfm all the necessary fequtes thqt too company fitted. Dashcam lga liya aapne and i think that is enough ......
Delhi gate the aap , karo bagh k modification ka review bhi dena tha bhai ji ....
Eddy ko hello bolna 😊
Great video sir, can i use ceratec in new car. My car run only 1000 km .
Pls suggest after how much kilometer use this product for better result
And pls give me ur feedback after five month.
@atinwalia5095 not recommended, it will be waste of money for new engines
@@SAGAR29 thanks
You did not mention you fuel average of last trip (without Ceratec)
Hello sir can i use liquimoly speedtec diesel for my scross ddis engine
This is a friction modifier, helps the engine to reduce friction and heat.
Car manufacturers will never advise the use.....
Please try this on a diesel car that covered 1 lakh+ kilometers
Sir, which dash cam you are using?
I used it nios after 1st oil change. Noise wise not much difference as engine was already too refined but it helped in improving acceleration by some extent.
Meri brezza lxi 1 service me hi 19 ka milage de rhi h lene k bad to 15 ka de rhi thi iska kya karan h
Non hybrid??
Ceratec dalne के बाद 113 hp से 120 hp ho गयी h kya gadi😂😂
It is common practice for vehicle owner to give the best to the vehicle so do I. But when the company is not recommending additives for a new vehicle which is very refined natural aspirated engine, the why people go for additives.
What about diesel cars? What type of additives can be used apart from diesel purge?
Better do engine flush before adding ceratec. I also did engine flush at 87000 kms before adding ceratec. Later added ceratec with Addinol engine oil. Mine is diesel i20
Sir, can we use it in our gear oil .
Maual gearbox yes. AMT, auto transmission with wet clutch no.
Can I use in Honda City Ivtec model petrol
Abhi engine oil change kiya hai. Smoothness aise bhi lagage
apne kaun sa petrol bhraya ap ki car me E20 petrol apne nahi dalya
Ceratec is for older engines and helps in restoring cylinder surface finish for some time. Not sure why it is being tried with a new engine. Benefits will be zero or very low to be very honest.
Please try it yourself and then comment. Try to refrain from passing judgement on things you have no first hand experience, thereby misleading others. I do not work for Liqui Moly but I've seen the benefits on a new engine. I first poured it when my car had run only 15k kms (ie. after my second engine oil change).
@@sudiptakiran That is why I said, the benefits will be zero or very low on new engines. Major benefits can be felt with older engines. I have used it on my old City with 75000+ kms.
@@sankyppp I beg to differ with your opinion as I would much rather minimize wear and tear on a new engine and keep it like new for a longer duration rather than let the normal wear and tear happen in a new engine and then when it's old use an additive. No additive will add metal to worn out cylinder walls, piston rings, bearing etc to make an older engine new again, so why not instead reduce the metal to metal friction in a new engine and make it last longer like new. My experience with Ceratec on a new engine has been much more than what I expected.
@@sudiptakiran When to use Ceratec will depend on its actual function, rather than the perceived function. If it is just a friction reduction additive, then it will make sense for newer engines. If its an additive with ceramic nano particles, then it will restore the surface of parts in older engines by filling ceramic particles in holes and rough surfaces. It cannot work the same in both cases.
@sankyppp I have driven toyota etios liva petrol around 85000km do you recommend me to use ceratec for my car engine health?
kya aap brezza ki jagah jimny lete. agr jitna price aaj h agar pahle hota
Sir, 70km pe toh Rudrapur hai, kya aap rudrapur se hai?
bhaiya aap apne experience se batana ki aap overall MID me jo average show karta hai usko kitna accurate mante ho?
In case of brezza its 90% accurate
Car engine seize hua h to kaise confirm karen.
Mileage mein koi difference aaya kya bhai
Bs6 phase 2 h kya apki
Engine Oil [0W16] change for 1.5L Petrol engine- (3.6L) cost Rs.1372
Add-on cost Rs.1800🥶
These additives are NOT required for Petrol engines (especially Suzuki ones)
Suzuki K15B/K15C engines require 0W16 Engine Oil.
Just stick to that and change oil every 10K kms to keep the engine healthy.
Diesel Engines are different, produce more carbon as Diesel is unrefined and require decarbonisation.
Suzuki/Fiat engines require 5W30 engine oil and some prefer additives for Diesel Engines.
Sir mere pas bhi brezza hai jo 2 month old hai or pehle din se hi 1st or 2nd gear shifting ke time background mein ek bhari c noise aati hai company or service center valo ko problem to samajh aa gai lekin koi solution nahi kar paa rahe, Maine ye questions pehle bhi pucha tha aapse, kindly koi solution aap hi dedo ki Mai kya karu? please
Sir noise check karne se he pata chal payega kis type ki noise hai me be gear shifter cable ka adjustment sahi na ho
Sir ji service centre ne clutch bhi change karke dekh liya lekin problem vesi ki vesi hai
Mai Punjab,Patiala se hoon, kya apka thoda sa time mil skta hai? Muje lgta hai ye solution aap hi kar sakte ho
I own Hyundai Venue 1.2 petrol MT.
when I drive my car and i put in neutral while the vehicle is moving the rpm fluctuates from 750 to nearly 2200 and sometimes more but never gets below 750 keeps fluctuating in moving neutral car but in idle it's quite stable.
I got it checked from Hyundai authorised service centre they scanned the car and took a road test also and at last they said it's normal it is nothing to worry about but it doesn't seem normal for me can u please confirm if its normal or not if not then what could be the possible cause for the same
Consider getting your throttle body cleaned after completely dismantling it
You may surely get throttle body cleaning. It happened in our old alto and after getting it cleaned it worked fine
@@markasbhatti6789 tried that also but didn't work at all
Sefty kitni ha
Sefty kya hota hai 😂
softy maang rha hai😂@@ayushgupta1923
Head light keshi he performs
Sir mujhe lagta he aap kuch jyada hi low rpm par chala rhe ho mileage ke chakkar me to car ka wear jyada ho rha he kyo ki oil circulate nahi ho raha thik se....itani jaldi gadi la mileage or pickup kese drop ho sakta he? Vo bhi maruti engine ka
Use low beam . 🙂
Meri brezza hybrid 18kmpl de rhi 3Rd service ke bad ❤ me hard drive krta hu 🗿 acha milange hai phle 16 ka deti thi ab 19-20 kmpl de degi ager me light foot chalau
Engine oil kaunsa daala tha Service center waalo ne?
@@Jatin__Arora ye to mujhe nhi malum par m.i.d me 18kmpl batati hai real life milege 14-15 ka hi aatà hài without AC ka bata rha hu with AC 15-16 kmpl M.i.D shown
@@rahulsinghrawat2700 bro dekhlo agar bill pada ho to usme likha hoga cuz meri third service honi hai Jan 1st week me and kitne ka bill aaya tha?
@@Jatin__Arora bhài bill to pta nhi kàha rkha hai pr total 1384 rupees lage with no laber cost engine oil kà price 1200+ tha
@@rahulsinghrawat2700 bas phr 0w16 hi dala hoga jo Maruti ka recommended hai, bhht videos me dekha maine 5W30 daal rahe hai jo koi 2500 le raha hai koi 1800 to koi 3200 le raha hai sirf oil k
Bhai mera breeza 11 deti hai normal chalane par
Sir, Brezza vxi CNG me hill hold control nahi hai. Additional hill hold control fiting ho sakti hai kya.
Bahut badhiya nazara hai❤
Try... Mannol Ceramo
Function n content is same and much cheaper
you don't need this CERATEC product, if you regularly maintain your car engine with a good quality synthetic oil, because this product shows its effect really fast but it's effect gone also very fast, only 5000km and after that you feel nothing special in your car's engine, may be you feel it's effect till your car's next service date but after oil change it's effect completely gone. liqui moly says that it's last for 50000km which is totally marketing gimmicks. so if you can buy ceratec on every service of your car then you can go with it and you will feel it's effect but if you think that its one time investment then may be you will be wrong or will be feel regret.
Baleno CNG me ye Kam karega
Answer plz
Bhai wo awaaz tappet ki aa rhi h Injector ki nhi 😅
Gear change indication RPM ke hisaab se set hota hai bhai uska engine k load se koi lena dena nhi hai bhai jaankari sagi diya karo.
Likhne se pehle apni jaankari ko he update kar lete, load and rpm dono se lena or dena hota hai, sab kuch ghar baithe google karne se nahi milta
Kuch to 10000 pe oil change k baad sari gadi smooth hoti h to itna zyada pata nahi chal paya
Dash cam pe bhi banao ek vdo.
गाड़ी पर सबसे ज्यादा अनुसंधान गाड़ी उतारने वाली कंपनी करती है।
ऐसा मेरा विश्वास है कि अगर हम केवल गाड़ी के owners book में लिखे हुए service schedule/oil etc का ही अनुसरण करे तो गाड़ी में कोई समस्या नहीं आनी चाहिए।
Very nice product
Rogers suspension per video banane Bhai
मैने बनाया है
PLEASE MAKE A VIDEO WITH ARMAROL ALTRA NANO LUBE
Sar ji Ram Ram 🚩🚩🚩🚩
Ceartec is an addiction, once used will always use........
Sir aapka haldwani ka address kya apni i 20 ko chech kerwani hai
please make vdeo on dashcams
Yes please
Sir Thora bat karsakta hu
Etne ma to oil change ho jayega
Dash board par kapda kyun rakha hai
Taaki reflection na aaye,😀 windshield pe
Bhai 1800 dal ke 1800 he recover krna tha kya? 😂
huge difference in disel engine lekin petrol engine ke bare me pata nahi
Hi
First view and first comment
creta ka engine jada silent h bhai 😅
Ye to tiin ka dibba hai mileage to dega na