1892 Mason & Hamlin Reed Organ Repair Part 2

Поделиться
HTML-код
  • Опубликовано: 2 дек 2024

Комментарии • 49

  • @TheCypherBlu
    @TheCypherBlu Год назад +1

    Great video! Thanks!!

  • @caudiogulf
    @caudiogulf 9 часов назад

    Thnx a lot for Demonstrating all the Mechanism , i watched both parts of this video to just to see the Reeds of it But Hard luck...

  • @slickwilley5482
    @slickwilley5482 2 года назад +1

    26:41 "Well let's play some silly little thing"
    Proceeds to play an extremely beautiful, melodic, and deep piece just out of the blue.

  • @isaacposselt7089
    @isaacposselt7089 2 года назад +1

    Watching now the last part of your video, wow it's a beautiful sounding organ, get better at playing it!

  • @philipblick8887
    @philipblick8887 4 месяца назад

    Great videos fascinating restoration congratulations from Aotearoa New Zealand 🇳🇿

  • @glennmcclellan8853
    @glennmcclellan8853 3 года назад +1

    What a cool instrument project ! Sounds really good too 👍🏼👍🏼

  • @isaacposselt7089
    @isaacposselt7089 2 года назад +2

    This is a really cool project you did!
    Not everyone has the courage to do a project as this, as you've had to replace everything that the other guy missed.
    I really find that leather button you made very intriguing indeed!
    I didn't know you could make something like that! I have an organ with a sub bass and a tremolo, but it just has a wooden dowel to plung up and down.
    I just got the bellows restored on it, but need to replace the tremolo and sub bass gaskets as they have no sealing attributes left.
    I figured out also how to determine where the leak was coming from, as I sprayed some shaken Murphy oil on it; you just find where the bubbles have been absorbed, sortof the opposite of finding air leaks.

    • @123Chevyman
      @123Chevyman 2 месяца назад

      I turned mine on one side for checking out if it has leaks. And yeah, you know, the foot pumps do not push air into the big bellows. They suck it out, create a vacuum and then the machine sucks air back in by itself. That's how it plays, too.

  • @strife7333
    @strife7333 3 года назад +2

    Fascinating to see the inner working/mechanisms. I always worry about the removal/reinstallation of screws with the old wood. Probably helps that its likely never been apart before.

    • @SeanBZA
      @SeanBZA 3 года назад +3

      You just have to make sure the same screw goes back in place, into the thread it originally cut in the wood. If the hole is worn out you can simply take some wood dust and a bit of wood glue, and make a putty, that you then partly fill the hole with, then put the oiled screw into the hole and put nearly into position, but not tight, and leave overnight for the glue to dry. Then remove screw, and put back into hole, to engage the new wood putty thread. Otherwise you drill the hole out, and put in a dowel plug, that you drill then to allow the screw to make a new thread into.

  • @juliangerardcascio1111
    @juliangerardcascio1111 Год назад

    😊 Good to see 👀 you again !

  • @massmike11
    @massmike11 3 года назад +3

    Would a little soap help lube some of those wood moving parts?

  • @RockStarOscarStern634
    @RockStarOscarStern634 2 года назад +2

    I wish they made Reed Organs again cause of their versatility.

  • @RockStarOscarStern634
    @RockStarOscarStern634 2 года назад +2

    Barenreiter Verlag has released Realized Continuo Parts of Bach's Vocal Works (like BWV 248, BWV 244 etc) that'll sound amazing on a Reed Organ in Full Organ mode (all ranks of Reeds & Couplers on) cause it's great for playing Basso Continuo.

  • @johannessilver8653
    @johannessilver8653 Год назад +1

    I admire your skill to fix this complex antic instrument and make it work. I just got an organ too...Chicago Cottage. It seems to work pretty ok but two keys do not give sound with one stop. With other stops I get a sound but the other key gives it weak while the other normally. There is some hissing through with that weak sound key. Wonder I have to open the whole thing.

    • @HackaweekTV
      @HackaweekTV  Год назад +2

      Probably a stuck reed.

    • @yogiperogy
      @yogiperogy 9 месяцев назад +1

      If it’s a treble reed, it’s small and doesn’t take much in the way of accumulated dust or other detritus to ‘paralyze’ it. Open up the instrument and activate the stop involved. Carefully withdraw the affected reed (or reeds , one at a time) and wipe down both top and bottom of the tongue with a Q-tip moistened with alcohol - methanol (methyl hydrate) or isopropyl, aka rubbing alcohol - and repeat with a clean Q-tip. Reinstall and try playing to see if that has done the job.

    • @johannessilver8653
      @johannessilver8653 6 месяцев назад

      @@HackaweekTV Correct...dirt in it.

    • @johannessilver8653
      @johannessilver8653 6 месяцев назад +2

      @@yogiperogy Yes...thanks...I found dirt there...pulled reed out, cleaned...now it sounds and no hissing anymore.

  • @wladjsj5547
    @wladjsj5547 3 года назад

    Really nice!!! missed you man! congratulations and see you next time

  • @Davidjb37721
    @Davidjb37721 3 года назад

    Thanks for your time

  • @thehotone12
    @thehotone12 Год назад

    Omg Sir! You did a great job and you need to give yourself more credit!
    Can I hire you to restore mine?!
    Thx

  • @RockStarOscarStern634
    @RockStarOscarStern634 2 года назад +1

    Stoplist on ths Organ?

  • @keithf2512
    @keithf2512 9 месяцев назад

    I have a Mason & Hamlin and I am hoping you can help me. The long baffle door that runs under the keyboard does not close all the way. Is it supposed to stay open a little bit?

    • @HackaweekTV
      @HackaweekTV  9 месяцев назад

      I think it should close but if it's open a bit it's OK.

  • @profeluisegarcia
    @profeluisegarcia Год назад

    You are a MAESTRO¡¡¡ Thanks¡

  • @yogiperogy
    @yogiperogy 9 месяцев назад

    My understanding is that harmonia suck air downward through the reeds by the bellows creating a vacuum beneath the upper structure of the gubbins. Is that correct?

    • @HackaweekTV
      @HackaweekTV  9 месяцев назад +1

      Air is pushed through on a harmonium.

    • @123Chevyman
      @123Chevyman 2 месяца назад

      There are both pressure and vacuum reed organs. My 1865 one is definitely vacuum. The pedal operated bellows empty a big bellows that gets depleted and expands egain if you stop pumping

  • @sarathai2876
    @sarathai2876 3 года назад

    That organ is a piece of art. So many little parts.I love your videos you are always working on something cool. Just wondering do you have heat in your man cave ? this time of year it must be a little chilly.

    • @HackaweekTV
      @HackaweekTV  3 года назад +1

      A couple space heaters do well.

  • @andygarbi8645
    @andygarbi8645 2 года назад

    Hello from the UK - thanks for making this video. I am restoring a M & H missionary's harmonium 1879 and was wondering if you had any tips for repairing leaking bellows - can they be patched? If so what material would you recommend? Many thanks in advance.

    • @bobrecordsTV
      @bobrecordsTV 11 месяцев назад

      Hi, I have the same question, have you been able to fix your bellows eventually?

    • @andygarbi8645
      @andygarbi8645 11 месяцев назад +1

      Hello - I eventually went with kid leather and so far the bellows are air tight

    • @bobrecordsTV
      @bobrecordsTV 11 месяцев назад

      @@andygarbi8645 Thank You!

  • @lindarawlins3271
    @lindarawlins3271 2 года назад

    I was hoping to see the bellows…ours isn’t working. No air being pumped in when working the pedals.

    • @HackaweekTV
      @HackaweekTV  2 года назад

      Probably a tear in the fabric.

  • @Davidjb37721
    @Davidjb37721 3 года назад +2

    How do you like your electric car

  • @fractul22over7
    @fractul22over7 3 года назад +1

    I reckon that smells good

    • @HackaweekTV
      @HackaweekTV  3 года назад +1

      It does. Smells like an old piano.

  • @csnpasuruan8158
    @csnpasuruan8158 3 года назад

    👍👍👍👍👍👍

  • @rhinomechanics8423
    @rhinomechanics8423 3 года назад

    sometimes ya gotta think backwards to move forward.

  • @bashkillszombies
    @bashkillszombies 3 года назад

    Dang you waste a lot of leather, you must grow it off your own back or something!

    • @HackaweekTV
      @HackaweekTV  3 года назад

      No waste, the left over went back into the scrap pile I pulled it out of.