How to use KR1204 : 12v RF 4-Channel 433Mhz wireless Remote Control Switch Module
HTML-код
- Опубликовано: 10 дек 2016
- Purchase Link: www.aliexpress.com/store/prod...
Instructions:
About Working mode:
1. Momentary/Jog: Press and hold--on; Release--Off
Keep pressing one button , the corresponding channel is working /on;
Loosen your finger is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter ))
2. Toggle/Self-Lock: Press--on; Press again--Off
Press one button for one time , the corresponding channel is working/on;
Press the same button again is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter)).
3. Latched/Inter-Lock: Press--on; Press other button--Off
Press one button for one time, the corresponding channel is working/on;
Press another button is stop/OFF（At the same time, another corresponding channel works） .
( 4 channel switch( receiver) need 4 buttons remote control (transmitter).
The setting of working mode：
1. Momentary Mode: pressing one time the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting momentary mode successfully .
2. Toggle Mode: pressing two times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting toggle mode successfully .
3. Latched Mode: pressing three times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press first remote button ,follow on second remote button , signaling three times by remote’s LED indicator informs about setting latching mode successfully ( first button stands for on , second button stands for off ).
4. 2CH momentary + 2CH Toggle : pressing four times the learning key button on the receiver board(Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
5. 2CH Momentary + 2CH Latched : pressing five times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
6. 2CH Toggle + 2CH Latched : pressing six times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
7. 2CH Latching + 2CH Latched : pressing seven times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
8. Deleting existing remote controls data: pressing eight times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully . 
Наука
Gracias me salvaste la vida
Allah razı olsun direnç .netten aldım ürünü program lama desteği veremediler tesadüf buldum videoyu çok faydalı oldu👍
Is it possible to latch say 3 or 4 channel by pressing only one button , say 'A' ?
Does the 12-volt battery work outside
Hey mate can you explain how to set the romotes without them auto alowing new remotes
Vorrei avere il pulsante D in modalità momentanea. Se premo quattro volte il pulsante sulla scheda, mi setta i canali A B in momentaneo e quelli C D in stabile(toggle), io vorrei il contrario, è possibile?
I would like to have the D button in momentary mode. If I press the button on the card four times, I set channels A B in momentary and C D in stable (toggle), I would like the opposite, is it possible?
If i press the button only the first press light up the led in the receiver
What distance work?
What distante work?
can you tell me about its Max range!! i m in need of 500-600meters remote operation!!
You need a high-power remote control, you can reach the scope of your request.
The remote control in the video is just an ordinary remote control, it can not meet your requirements.
Ok.... Which reciewer with 4 relays i can only one or two or free keys from all four ?
For example, i want manually set key 3 for relay 1, key 1 for relay 2, key 4 for relay 3 and key 4 for relay 2.
yes, you can pair the remote control key with unlimited receivers, but you can only pair 20 remote controls with one receiver
Would this work for my garage door opener? But I'm worried about interference which is the reason I need to mod my garage door. I like the remotes because they can stay in the vehicle but should I use Wifi or Bluetooth ads the communication channel?
Yes, of cause it works for garage door opener. Many customer refit our product into it. You can check this video ruclips.net/video/jKkdHoNSuJk/видео.html . Actually the maximum distance can be 50 meters. Let me know if you have any problem!
Would this receiver work with my car's garage door opener or only the supplied remote controls?
We strongly advice you to buy our remote control with our receiver. Our receiver can Only Work with 433Mhz coding with EV1527. Since I'm not sure what garage door remote control you are using, I really cannot guarantee it will work. Here is the link for further information for the receiver. www.aliexpress.com/store/product/DC-12V-10A-4channel-4relays-remote-control-switch-RF-wireless-remote-control-switch-433-92MHz-Toggle/2138259_32698314940.html?spm=2114.12010612.8148356.13.32751667dHqinh
I have the 4 channel 12v dc from transmitter and for the receiver I will use 12 v dc but can I connect a ac appliance such as tube light or fan. If yes how?
The voltage of the control relay is DC12V.
But the output can be independent of the input, it can use the voltage range is 0V-250V, can be DC or AC. When its power comes from the control relay DC12V, the output is DC12V; if its power from the external input, then the input voltage output is the same voltage.
If your receiver comes from me, then it can.
can one remote function run 3 different functions ??
for example:
A button for self lock mode,
button B for inter lock mode
C button for jog mode.
yes, try programming pressing 4, 5 and more times the button on relay board
Hi could you do a video on exactly where to solder an antenna wire onto a rf receiver board.
The receiver board already has an antenna and does not require additional solder.
just in case you wanted to add an external antenna for better range.
can you explain how to wire it?
i saw a wiring diagram but it was showing that the switched connectors were all + and the negative was using the same ground as the 12v in for the board , what if i want to power the board with a 12v dc transformer but switch something on and off that has it's own separate power supply? for example i want to use the 2 power terminals V+ and V- to power this board with 12v but then i want to use 2 of the other 3 terminals(for the single relay single channel model) to switch something that has it's own power supply i do not want to use the same 12V power supply that is powering the board, i just want to get continuity between 2 of the other connectors that are not being used to power the board and not use the same groung that is being used to power the board
@@andreamitchell4758
Hi Andrea, did you ever find the answer to this question, I have a similar dilemma.
Thanks
Ash from 🏴
at Momentary/Jog mode can press 2 button at same time
Hi, there would not be any reaction if you Press A and B at the same time.
Can you use multiple boards at the same time working independently and not have the remotes conflict with each other? Do the key codes have to be changed for each?
Hello, you could use different remote to control different receivers at the same time, they won't interface each other. Don't have to change the key codes.
Thank you
@@qiachip what is the range inside the house...between rooms with doors open ?
ya recon one these wood run old 12 car starter motor used on a corsing drag lure
And how to use ONLY 2 keys, A, B on relays 1 and 2 from one remote control and ONLY 2 keys C and D for relays 3 and 4 from another remote control? Remote controls have 4 keys.
This receiver needs to match a remote with 4 buttons.
Which is the decoder IC?
Hello EV 1527
Hi! What kind of battery for the remote?
CR2032
How many distance this remort work.i mean its range.plaese tell
About 50 meters in open area.
hello, can 2 receivers learn 1 remote?
Hello, one remote controller can be connected with many receivers. 2 receivers learn 1 remote.
Подскажите пожалуйста бывает что реле срабатывает само по себе, что это может быть и как это устранить?
Ладно, реле работает само по себе по двум причинам.
Одна из причин связана с пультом дистанционного управления: вам нужно восемь раз нажать кнопку обучения на приемнике, чтобы очистить код и повторно выполнить сопряжение пульта дистанционного управления.
Одна из причин заключается в том, что, что касается печатной платы, проверьте, не касалась ли она водой или случайно не касалась ее.
После устранения этих двух причин вы сможете решить проблему. В основном по первой причине вы можете попробовать подключить еще несколько пультов дистанционного управления. Не торопитесь при сопряжении, чтобы избежать помех со стороны других пультов дистанционного управления.
Can it work for DC motor
Yes, exactly working on DC 12V
If i press eight times nothing happened..i dont know how to reset it.
Hi, can you give me the direct link where you purchased your receiver from?
здравствуйте ворота открываются от некоторых соседских брелков сосед снимает или ставит на сигнализацию свою машину и у меня открывается ворота как это устранить?
It's great to hear from you and happy to solve your problem.
It is recommended that you change the remote control and pair it again. Delete the original remote control and pair the new remote control.
Hope it can solve your questions
3 modes only?
The product has 7 functional modes. The video only introduces 3 commonly used modes.
Bhai ye connection samajh nahi aa rahe apana mobile no. de dijiye please urgent work
単5電池かと思ったら違った