Fujitsu Esprimo Q920 disassembly guide - RAM, SSD, CPU thermal paste replacement

How to open and disassembly computer Fujitsu Esprimo Q920 to:
- upgrade RAM memory
- replace SSD disk
- replace thermal CPU paste
CPU fans and heatsinks for laptops at Siggmo: siggmo.com/pro...
RAM modules at Siggmo: siggmo.com/pro...
SSD disks at Siggmo: siggmo.com/pro...
Fujitsu laptop spare parts: siggmo.com/pro...

[@Jon-E]

This is the correct way to do disassembly tutorial for me, no useless words, just dismount

[@akimische]

It is still looks like the procedure has been done for the very first time :) In any way I was unable finding the appropriate description and found your video! Thank you!

[@thomaswulf9959]

To replace the thermal paste all you need to do is open the bottom, remove the 3+1 silver screws, lift up the disk cage and release the three big screws that hold the heat pipe down. The video is rather complicated and not to the point at all. My CPU temperatures went down from always >73° to usually under 40°-60°.

[@mapuche1971]

idle or load?, my q920 is 63 idle and 68 load after after changing the thermal paste

[@jekkiel-dorado3791]

When opening, only 4 screws need to be removed. 😊
And to replace the thermal grease, please open the enclosure, remove the motherboard, and then remove the cooler. 😣
In the same way, in reverse order when assembling. 😉

[@lotharrieck5024]

pls show me which one you mean

[@GcS1515]

Just to confirm, there is no need to separate the heatpipe etc to access the RAM/SSD - the RAM and SSD/Disk can be accessed with the removal of two small screws, and slide the plastic cover, then release and lift the metal cover underneath using the small plastic catch. No need to remove and reseat the cooling if that is the only access you require.

[@thecalif2914]

I don't even need to remove screws to do that. BTW, any idea which form factor is the M.2 lookalike slot?

[@DerDickeTux]

@@thecalif2914 it's a half size mSata

[@ubyone71]

@@DerDickeTux no it's a mini pcie

[@klausbrinck2137]

I had a mini-pc with a soldered-on eMMC-SSD, and now it´s burnt-off, I cannot access my data in the eMMC-SSD... Do you think, accessing the data in this ssd-memory shown here, is easier, in case also this mini-pc burns-off and I have to take the SSD out??? thanks for any answer... I mean, this SSD doesn´t look at all like the SSD-cards I otherwise know... What would be the procedure to extract the data of this SSD here???

[@IgoSplashman]

How to remove the SSD if it doesn't move: There's a little button on the lower right next to the drive. Press it, then pull.

[@stuartthurstan]

Tip: When you make a guide, you come across as more authoritative on the subject if you're not cluelessly blundering through it for the first time yourself. xD

[@dk_1972]

widać że koleś nie ma zielonego pojęcia co robi, bo wszystko robi żle !

[@xn0gaming]

I wonder how to install the wlan antenna in my q920, I got the wlan card right in, but where to put the antenna itself? Do I need to disassemble the entire unit?

[@jakobk9895]

Start from beginning..How to take of the part above??..not good

[@redlazyfox7292]

Sorry, but you don't know what are you doing. Only for screws and you will have access to the cpu side of the motherboard.

[@adrianzawadzki4318]

Moreover, this dude act like a butcher, not IT specialist. I recommend to be more gentle and do not leave any parts hanging on wire like a damn anchor...

[@supreme3376]

@@adrianzawadzki4318 Może to wędkarz

[@mariorossignoli3305]

dove va montata la schedina wireless+bluethoot

[@NMHC1978]

can i replace the i5 to a i7 ?

[@jekkiel-dorado3791]

Yes, you can. Use a i7-4785T or i7-4770S. I have replaced the i5-4590T with a i7-4770S and that works creat! 😊

[@gurusgym175]

How do you remove the ssd Quick

[@pietrogalassi5490]

Is it possibile to change heatpipe and fan in order to lower the noise ?

[@petersmithens3085]

I like if people are doing disassembly videos what i dont like videos like this where people try to open the case in the video without knowing how the video took half of the time if you try before making the video

[@alexisg311]

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@user-ni2yf9fe9b]

hi, do you know which burner it supports? 9.5 mm or 12.7? Thank you.

[@siggmo]

9.5mm

[@user-ni2yf9fe9b]

@@siggmo Grazie

[@ranshik]

Sir I have same device but not turning on

[@polar.747]

You can change Cpu??

[@supreme3376]

i guess so

[@MrPrzemal]

This is NOT how you do a guide for others! You are blindely unscrewing everything you see and tearing apart without a clue.

[@pixa2788]

You don't have to use so much thermal paste 🙈

[@dk_1972]

ODKRĘCA SIĘ TYLKO 4 ŚRUBKI - 3 SĄ W ZAGŁĘBIENIACH 1 NA PŁASKIEJ CZĘŚCI, PODNOSI SIĘ JEDNĄ CZĘŚĆ PŁYTY I MAMY DOSTĘP DO CHŁODZENIA, PROCESORA ITD. PO CO KOLEŚ SCIĄGASZ ALUMINIOWĄ OPASKĘ OBUDOWY? PARTACZU, TRZEBA BYŁO POPRÓBOWAĆ A POTEM NAGRAĆ FILM, A TAK ZROBIŁES FILM Z RZEŹNI, A NIE "disassembly guide" !

[@supreme3376]

Rzeźnia Guide

[@vendettasnares]

Dzięki. Wystarczy odkręcić te 4 śrubki od strony dysku / RAM-u.

[@supreme3376]

5.05 is that Wifi Port or nvme ssd

[@siggmo]

WIFI.

[@ubyone71]

it is a Mini pci-e that can be transform to NVME....

[@supreme3376]

@@ubyone71 2.5 inch i will consider

[@J_Mani]

4.30 is on the other side also space for an M SATA SSD.

[@Danielxjw2]

Hab noch nie so ein langweiligen Gesehen