I have work with the warm white ones, not those exactly but they give me good results un 2x2 with 200 watts. It would be great to know lumen output to see if the maker is lying wiht the efficiency, they have an output of 4500lumen each in AliExpress...
Test the alibaba quantum boards that claim to use authentic samsung diodes. If their description is honest, they are by far the most value for money grow light
@@joshamy39 do u guys even understand what Alibaba is they sell knockoffs or Chinese stolen plans and then find the absolute most garbage left over diodes from Samsung's throw away pile or non top notch performing gear. It's like getting nike air maxes from the corner store. Also like shopping at Marshall's or TJ max sure it looks ok the first time u wear it till u find the flaw in stitching or holes or just messed up in general. But hey it's ok u just gotta buy a new one every grow or 2...
@@greenghost-xi5jp It's also where Nanolux and Growers Choice buy. At least Growers Choice use Lonbright(Longhood?), have changed name slightly. I have a great Low frequency, square wave ballast with digital readout, dimming, and boost, no fan, I-64(?) waterproof approved, from Ceramic Solutions lighting in N. Cali, and they/he buys through EBM in China, I believe. Last time he had 630W DE-CMH ballast(same as above), w/double ended lamp for $199, shipping included. So I bought another set! Impressive! He even gave me the newest 3K-R improved lamp, just to try out-Colin is great. Much like Shane, here! I've heard certain provinces are much better, higher quality, while some areas are known to be lower quality, etc. They do have their own patents, and very smart designers, creators in some areas. But, yeah, I have seen exact copies of products specifically in the USA. Sun Supply AC/DE fixture is great, and expensive, but Lonbright has totally copied. That's who Growers Choice gets their CMH equipment from, and they'll label them with Growers Choice emblems, whatever they ordered. This has been done often by big companies. Alibaba gives us regular people these same deals. I was going to upgrade to a 1000W DE-CMH, but only available in 220V. Adding about 400W(5x5 Gorilla tent), but 4-100w Migro lights would give a much more even lit canopy, and the adjustability and craftsmanship, Luminous COB's, most efficient. I had disability back pay coming, ended up a few grand less than expected. Looked all over Alibaba, different COB setups everywhere. Finally found 1 company that makes 100W COB units using 2-50W COB's each on a 1M rail that the COBS can be slid back and forth, as well as turning 350°, and can be angled 180°, which is working well. These only had Citizen CLUO48-1212 COB's, less efficient than Migro's Luminous COB's, and cheap, but workable, but craftsmanship is low compared to Migro, but hopefully stays functional. I still prefer mostly HID lamps, but COB's as supplemental is great. Shane's Migro are definitely higher quality w/better workmanship, as well as better efficiency. And upgradable if better COB's come out. Sorry for rambling on. Migro are Tops in COB's! Leaders for awhile now, and into the future I believe!
It would have been nice to see the $/ppfd and the ROI for Ebay chips Vs Migrolight ones. Ebay white LED (cheap to buy, but require more electricity) MigroArray2 (expensive to buy, but use less electricity) Question: how many 8 hours days should we wait before we get the same price (buying price + electricity) for a similar ppfd? My guess would be that Ebay chips will win by far.
Thanks Shane! I'm saving up to buy a micro light for my next grow! Using a Viparspectra Reflector 600w this time around; fingers crossed for good results!
I'm so glad i found this video, i want to move my plants indoors for the winter and was thinking on a cheap alternative for growlights, guess i'm not buying those
I bought a load of these some time ago (advertised as Full Spectrum) and i did connect one up - but i was worried about safety as it got really hot - added a heat sink but i think I'll use them in the garage when i get around to it - since bought the Mars Hydro TSW 2000 using it in a 120cm x 120cm tent but only using a 80cm x 80cm area as i have a turntable set up - can access the plants better that way...! Wish i found your chanel sooner - enjoy your videos - best wishes from County Donegal....!
Only 14 ppfd for 48w? Very strange results, i have almost identical leds bought via Aliexpress and i've achieved acceptable results for young plants. For sure they are not professional but if those values are correct i couldn't have grown anything.
@@MIGROLIGHT Nope, DOB4075 (bridgelux). Can i ask what instrument (multimeter?) you have connected to the sensor to read the values (divided by 10) in that display?
I use one of these on an old computer heat sink for my seedlings in a 1x2 mylar box and find it works just great. But for veg and flower I have a much better setup but for something cheap I use 4 weeks a year this is perfect. I used to borrow 2 2ft T5 bulbs and this is not as good probably but I'm happy
Hi there I've got an old led 600 watt I'm thinking of trying to make a new one out of it by changing the leds it's got5 watt leds and is around 60cm x 60cm it was at the time a good quality light but for me it was just too much bright red colour for me so it's just been sat in the box since is there any way I could do this any help from you or a sub would be much appreciated thanks
I have setup a solar electric power system. Is it the driver of the chip a transformer. And would it not be more effective and a better quality light to use a driver chip without a driver to supply the chip direct from the solar battery with the required voltage for example 36v. That can be achieved by 3 12 volts solar batteries in series. Or if I upgrade to a 48 volt lithium battery with a dimmer on to tune to the required voltage. With a driver chip the current have to be dbl transformed with seems a bit unnecessary?
Hello Shane< Again, another great/informative video. Keep up the good work. Question: I have 2 sets of Secret Jardin 26w TLEDs as extra lighting/high noon [yes, set to go on from 10;00-14;00 o"time), BUT lighting from beneath/upwards.. how could i measure the par/ppfd there, and if it's too close/too much lighting??
Hi mate, good work, you say you took the measurements on 90cmx90cm at 1min40sec and at min 4 you present the results on 60x60cm. Also could you pls try the measurements with the lens on and off ?
I have a cool white one on a cpu heatsink/fan combo above my workbench. Makes great task lighting. Cob is rated at 50w but my meter shows it draws about 65w. Also have some warm white and some full spectrum blurple one I thought about using in another project but given your review of them I may go another route.
Hey mate. I was wondering if you could test a popular grow light on Amazon called the CrxSunny X6 (or X5). All that the data says is that they use Epistar full spectrum cobs.
i would like you to explain too me how blue light is the least powerful for photosynthesis.... EVERY single photosynthetis animal (almost every coral) in the sea relies on blue light almost soley and at par and pur levels a plant would burn under! your description is wrong imo...
@@MIGROLIGHT it's so great you spend your money and get these new grow lights that come on the market and test and share the costs and result comparisons. Question. What do you end up doing with the lights when your done? Sell, use, give away?
Are you sure your meter is reading red correctly? Both your tests look exactly like the sellers advertised graphs but with the region of red light's intensity reduced by 50-80%.
Just to follow up. I did a really half-assed spectrum test (photo of light on flat white background analyzed for RGB), and R/B were virtually identical in perceived intensity. Not exactly scientific, but I don't have a $500+ spectrometer. By contrast, your readings look to be about twice the intensity across "blue" vs "red". My cob however has that "red led" coating you point out on your blurple unit completely covering the leds (I've never actually seen one with that cutout before, 99% of the ones on eBay US are like mine... which would explain the increase in red spectrum at least partly. If you get the chance please drop another $2 and try one of the more typical style. You could also pick up a pure red unit (rarer and a different (looks older) style, but available for about $3 instead of $2) to see if it could be used to balance out the blue-heavy nature of the "full spectrum" without introducing an excess of yellow and green light. I'm also curious about your reflector? I've never held one of your unit's but it appears it's built into the lens. How efficient is it at working with these cheap, backed cobs? As they scatter light in a very nearly hemispheric range without a reflector. They are often sold with a very cheap aluminum/plastic reflector/lens, and I'd be curious to see how that setup compared when used with them vs your setup.
Re-watching some of your vids. I'm curious, you mention the leds being improved but given the simplicity of the driver the power factor must be feckin terrible. I get the LEDs won't be great but surely most of that inefficiency lies in the driver doesn't it?
The driver is probably about 70% efficient vs 94% for best in class. The LEDs used would be just as much to blame for the low result. They are only a few Euros each after all.
I think Shane has skewed the information on this. If you were wanting an input of 35watts per square foot, that'd be about 1.5 foot coverage on an fifty watts. Shan has chosen to test fifty watts cob over a four square foot area. This dillutes the results, therefore hiding the actual efficiency of the cheep cobs. I see lots of praises for the useful information on comments. I actually don't appreciate skewed tests that are obviously skewed to keep the driverless cobs from being competition for him and other producers. That's not scientific or responsible testing. Shame on you Shane. You should redo the tests to redeem yourself in the eyes of the people I've made aware of this.... Adam Bennett.
Could you test done kingbo led grow lights some think there excellent some think there crap perhaps you could debunk then 👍 great video, as expected the eBay cobs are abismal
I've got six of the blurples hes testing and four of the whites. i used one blurple on a seed which grew to a foot and a half tall. Didnt look any different to any other seedlings. But I got a migro 100 and could just turn that down, then up as it grew. Now I[ve got six crap 50w cob lights (tey pulled exactly 50 from whall) and 1 300w and 1 1200w chinese knockoffs of mars hydro. So all for the fucken bin!!! Aaarrgghh....one piece of advice for newbs. Never buy cheap stuff. You[ll cry in the long run. If des0perate, get some cfls. But best advice is to save, and buy once. Also got full HID gear to dispose of. Another fucken waste that was. I got migro aray 4, plus the migro 100. Perfect for me. Good luck guys !
As I understood the video they were tested in a MIGRO fixture with a lens, so I don't think two lenses would bring the numbers up more but maybe would make a nice telescope...
You should test the ming & ben Grow Plant A/C 120v COB I got around 40 par 53 watts almost zero green in the spectrum but way better than these you tested and they where only $.75 per one 53 watt COB.
Your te sd t is terribly skewed on these led Cobs. Do your numbers on a 1.5ftsquare area. You have to know you used too large an area to test a 50 watt chip. You skipped right through it. That ain't cool, shane...
But why would you use a 90x90 Area to measure that kind of light? I would measure it just directly under it. That Area is way to big. No one would want to light this big area with just a 50W Chip
now thats something ! real nice thank you for that been thinking about tinker up a light fixture with cobs But Now il definately Not tinker up one im pushing for the cfls and storebought led ramp instead and pay those 100 £ instead for a premade . For vegetable growing actually not cannabis anymore ! / Paul Roger
Check out NukeHeads.com, Cody has built some awesome grow lights, totally American made and not these cheap $2 lights, there voice activated and working on chassis and liquid lens....They put out an awesome spectrum and alot of par.....
Alot of people dont trust that guy coady.Beware i would buy nothing from him. Shane you can trust i bet watt for watt efficiency migro would blow away anything coady from nukeheads sells. His nutrients is basically repackaged blue crystalized cheap maricale grow or exact same looking no name stuff. A friend tryed giving me a bottle of his flour power i think it was called. Looks identical to the maricale grow stuff or very cheap no name stuff. Pure synthetic crap good bye good friendly soil life microbiology microbiological life if you force feed your plants that garbage.
@@kkrollingskkrollings3173 Yeah, I've heard all the bullshit, his FPP works wonders, and it's not miracle grow, just because it's the same color, you people listen to all the bullshit people talk about others, I've talked to Cody, I own one of his new lights, your all gonna eat your words, this guy knows what he's doing....Why do you run people in the ground who are working there asses off in America, not giving there work and ideas to China, I think they've stolen enough from our country....And I don't give a shit where your from, you have America to Thank that your not part of Hitler's Nazi Germany, we're taking our country back one small business at a time.......
5 лет назад+1
@@michaelhiggins3382 NukeHeads is a conman who sells junk to dupes. Then again, with all that empty headed nonsense you're spewing, it's no wonder you love it.
@@kkrollingskkrollings3173 I don't know how it works in soil. I use in dwc and it does really good results. And I know all about nukeheads issues but the fpp in hydro is way better then alot of nutrients on the market. I'm not sponsored. I have grown great results with alot of other companies and for the cost and how I use it it kicks ass. I use it with hydroguard and sometimes other additives. But it really can be used as a stand alone all in one nutrient. Works great when adding any company's sweetener.
The Muckler yeah bro, unfortunately some things still have to be sourced from China, I own a construction business and over 80 percent of the steel comes from China or India and it’s junk, you can blame that on Obama giving away American jobs to the Chinese, but everything else Cody uses is American made and built in America, by Americans...
Спасибо за видео, коллега! Полностью с Вами согласен! Использую эти матрицы СОВ (с добавочным синим) в производстве светильников, их синий спектр очень активен. Я их добавляю в общий блок источников освещения на светильниках! Всех Благ! P.S. Пожалуйста, посмотрите мой канал. И страницу rem-stroy-garant.com
Esos chips dan solo 60 lúmenes vatio y no están diseñados para estar encendidos mucho tiempo, se utilizan en vías de paso con un volumétrico que al detectar que vas a pasar enciende el led y cuando pasas se apaga. Es de lerdos que monteis eso para los fines que los montais algunos.
It is a bit pricey. But when you calculate parts and engineering and location of manufacturing and shipping costs. Its actually a nice light. And remember the stuff it grows will pay for it in no time. I would love to someday soon at least get one. But would love to own 4.
@@shakascloset1700 dude don't buy this crazy expensive shit. Make your own! Use some citizen 1216 and some PRB or Samsung lm301b quantum boards and throw this shit away.
@@shakascloset1700 don't ever spend money on this brand. It a waste of money when there are a lot of better and cheaper things out there. Just don't do it.
I think many of your vids are very informative, this one sucks. Its way to long jst to tell us the 2 cobs are shit, I miss a recommendation for a better cob. That would complete the video.
I like how you have the driver remote on the Migro, the design is thought through very well, impressive little light!
I have work with the warm white ones, not those exactly but they give me good results un 2x2 with 200 watts. It would be great to know lumen output to see if the maker is lying wiht the efficiency, they have an output of 4500lumen each in AliExpress...
Lumens?
down load a lux meter on your phone and whatever the lux reading is divide it by 76 that's a fairly accurate par number without a fancy meter
Lux meter app dont read more than 1000 lumen, more than that they saturate and don take a good reading.
Please
@NukeHeads 3 I´m talking about the maker speecs not grow science, i want to know if they lie in their speecs or not. Sorry by the spanglish
I swear one more video like this and I'm switching to migro. I've always stayed away because of the price but this really shows the difference
Dont be so easily fooled by migro
I was tempted by these, was about to buy then remembered you had reviewed them , you saved me some money cheers
Test the alibaba quantum boards that claim to use authentic samsung diodes. If their description is honest, they are by far the most value for money grow light
οκ I know right they have the same parts as the hlg so why wouldn't be the same... It should be
@@joshamy39 do u guys even understand what Alibaba is they sell knockoffs or Chinese stolen plans and then find the absolute most garbage left over diodes from Samsung's throw away pile or non top notch performing gear. It's like getting nike air maxes from the corner store. Also like shopping at Marshall's or TJ max sure it looks ok the first time u wear it till u find the flaw in stitching or holes or just messed up in general. But hey it's ok u just gotta buy a new one every grow or 2...
J&A but diffrent boards yeah it’s similar
greenghost3737 you are probably right but Id like to see migros test to believe it
@@greenghost-xi5jp It's also where Nanolux and Growers Choice buy. At least Growers Choice use Lonbright(Longhood?), have changed name slightly. I have a great Low frequency, square wave ballast with digital readout, dimming, and boost, no fan, I-64(?) waterproof approved, from Ceramic Solutions lighting in N. Cali, and they/he buys through EBM in China, I believe. Last time he had 630W DE-CMH ballast(same as above), w/double ended lamp for $199, shipping included. So I bought another set! Impressive! He even gave me the newest 3K-R improved lamp, just to try out-Colin is great. Much like Shane, here! I've heard certain provinces are much better, higher quality, while some areas are known to be lower quality, etc. They do have their own patents, and very smart designers, creators in some areas. But, yeah, I have seen exact copies of products specifically in the USA. Sun Supply AC/DE fixture is great, and expensive, but Lonbright has totally copied. That's who Growers Choice gets their CMH equipment from, and they'll label them with Growers Choice emblems, whatever they ordered. This has been done often by big companies. Alibaba gives us regular people these same deals. I was going to upgrade to a 1000W DE-CMH, but only available in 220V. Adding about 400W(5x5 Gorilla tent), but 4-100w Migro lights would give a much more even lit canopy, and the adjustability and craftsmanship, Luminous COB's, most efficient. I had disability back pay coming, ended up a few grand less than expected. Looked all over Alibaba, different COB setups everywhere. Finally found 1 company that makes 100W COB units using 2-50W COB's each on a 1M rail that the COBS can be slid back and forth, as well as turning 350°, and can be angled 180°, which is working well. These only had Citizen CLUO48-1212 COB's, less efficient than Migro's Luminous COB's, and cheap, but workable, but craftsmanship is low compared to Migro, but hopefully stays functional. I still prefer mostly HID lamps, but COB's as supplemental is great. Shane's Migro are definitely higher quality w/better workmanship, as well as better efficiency. And upgradable if better COB's come out. Sorry for rambling on. Migro are Tops in COB's! Leaders for awhile now, and into the future I believe!
I have a cool white one on a cpu heatsink/fan combo above my work bench. Makes great task lighting.
I've been seeing these on big clives channel. I'm glad you did this. I was curious about them
jPapapot same hahaha, a bit sad though to hear how crap they are
the best review, a lot of usefull information, I loved it. Thank you!
I sure do appreciate your videos, and the method you use to teach is very knowledgeable, and helpful keep up the good work!
I'm doing the exact same thing, I should probably make a vid whilst the plants are still young
I should, i would, i could...
Did you then?
It would have been nice to see the $/ppfd and the ROI for Ebay chips Vs Migrolight ones.
Ebay white LED (cheap to buy, but require more electricity)
MigroArray2 (expensive to buy, but use less electricity)
Question: how many 8 hours days should we wait before we get the same price (buying price + electricity) for a similar ppfd?
My guess would be that Ebay chips will win by far.
Thanks Shane! I'm saving up to buy a micro light for my next grow! Using a Viparspectra Reflector 600w this time around; fingers crossed for good results!
You should consider chilLed.com his youtube is growmau5
Cool. You can run the Vipar and MIGRO led together. What size grow area are you using?
@@MIGROLIGHT 2.5ft x 3.5ft
I'm so glad i found this video, i want to move my plants indoors for the winter and was thinking on a cheap alternative for growlights, guess i'm not buying those
I bought a load of these some time ago (advertised as Full Spectrum) and i did connect one up - but i was worried about safety as it got really hot - added a heat sink but i think I'll use them in the garage when i get around to it - since bought the Mars Hydro TSW 2000 using it in a 120cm x 120cm tent but only using a 80cm x 80cm area as i have a turntable set up - can access the plants better that way...!
Wish i found your chanel sooner - enjoy your videos - best wishes from County Donegal....!
Migro, awesome videos and awesome lights :)
I have a single cool white one on a PC heatsink with a fan. Pulls about 65w from the wall. Works ok as a veg light. Wouldn't want to flower with one.
Thank you for sharing your knowledge and improving mine!
Have two 200w 3000k bars I use to supplement flowering and want to dim them
Not true.
I have those lights and the plants are great.
Actually those Cob LEDs get better if you cool them right, i watercool mine and i am very happy with them.
Only 14 ppfd for 48w? Very strange results, i have almost identical leds bought via Aliexpress and i've achieved acceptable results for young plants. For sure they are not professional but if those values are correct i couldn't have grown anything.
Do the part numbers match? You can see the numbers in the close-up. I'm sure there are many variants out there.
@@MIGROLIGHT Nope, DOB4075 (bridgelux). Can i ask what instrument (multimeter?) you have connected to the sensor to read the values (divided by 10) in that display?
Stefano Pasquali were did you get your cobs
@@darrenpowell7225 m.it.aliexpress.com/item/32720760568.html?trace=wwwdetail2mobilesitedetail&spider=y&productId=32720760568&productSubject=Hydroponice-AC-220V-20w-30w-50w-led-grow-chip-full-spectrum-380nm-840nm-for-indoor-plant
Stefano Pasquali i have seen those exact ones also in action and they are really powerfull 👍
I use one of these on an old computer heat sink for my seedlings in a 1x2 mylar box and find it works just great. But for veg and flower I have a much better setup but for something cheap I use 4 weeks a year this is perfect.
I used to borrow 2 2ft T5 bulbs and this is not as good probably but I'm happy
For little seedlings the blurple one may be a good spectrum. I hear you can get accelerated growth in very young seedlings with lots of blue.
@@MIGROLIGHT that's exactly the one I have. And I've learnt so much from your videos thankyou from canada
So what's the recommendation. Stock up on halides whilst we can get them?
What tipe of dimmer would I use on the slightly bigger more square solderless dimmable cobs?
Good video but what would be a good solution? I dont have $300+ to buy a good light so im looking for something affordable.
Hi there I've got an old led 600 watt I'm thinking of trying to make a new one out of it by changing the leds it's got5 watt leds and is around 60cm x 60cm it was at the time a good quality light but for me it was just too much bright red colour for me so it's just been sat in the box since is there any way I could do this any help from you or a sub would be much appreciated thanks
Their great for veg, my plants like the ones I built. The trick is to include some sort of dimmer or it'll burn out in like a month
How did you dim these?
It was on 30 cm. And we got the average par value on the table. How much was the peak value in the middle of the table directly under the light?
Is that fixture submerged in that fish tank??!
would you test this to see if it is good for Hopoocolor HPCS300 Mini Spectrometer Handheld CRI Meter for LED Light Tester with Software
great info always backed with tests !
I have setup a solar electric power system. Is it the driver of the chip a transformer. And would it not be more effective and a better quality light to use a driver chip without a driver to supply the chip direct from the solar battery with the required voltage for example 36v. That can be achieved by 3 12 volts solar batteries in series. Or if I upgrade to a 48 volt lithium battery with a dimmer on to tune to the required voltage. With a driver chip the current have to be dbl transformed with seems a bit unnecessary?
Great video!!!!. What do you think about CREE COB LED Xlamp (any of them) ?
Can you do a comparison video on the migro 100 vs the cheap X6 sunshine spectrum COB led fixture found on amazon.
There is new models of there COBs .... maybe better ?
Hello Shane< Again, another great/informative video. Keep up the good work. Question: I have 2 sets of Secret Jardin 26w TLEDs as extra lighting/high noon [yes, set to go on from 10;00-14;00 o"time), BUT lighting from beneath/upwards.. how could i measure the par/ppfd there, and if it's too close/too much lighting??
The peak blue spectrum isn't centered at 450nm like most it looks like 425nm
If the cob was run with an external driver, would the results be different?
So can you wire 7 of those warm white leds in series or to one power source, poss 8 with a dimmer??
Hi mate, good work,
you say you took the measurements on 90cmx90cm at 1min40sec and at min 4 you present the results on 60x60cm. Also could you pls try the measurements with the lens on and off ?
The grid was 90cm x 90cm but the PPFD readings were 0 outside the 60cm x 60cm area. Lens on/off will differ by about 10%
Did you cool down the back of the LED with some heatsink?
I have a cool white one on a cpu heatsink/fan combo above my workbench. Makes great task lighting. Cob is rated at 50w but my meter shows it draws about 65w. Also have some warm white and some full spectrum blurple one I thought about using in another project but given your review of them I may go another route.
What is the difference between this F6040 Warm White and F6040 Pink?
So the purpose built "grow light" will grow plants worse than the general purpose white led.
Hey mate. I was wondering if you could test a popular grow light on Amazon called the CrxSunny X6 (or X5). All that the data says is that they use Epistar full spectrum cobs.
Best Epistar led light I've tested is about 1.4umols/watt efficiency. Not really worth it in my view. CMH is just as good...
@@MIGROLIGHT thank you for the reply :) I wonder if it being in a cob format would help push up the efficiency a bit?
curious, is green is in the middle of the light spectrum? seems so
Nice review. Wouldn't mind you testing the quantum board on aliexpress.
i would like you to explain too me how blue light is the least powerful for photosynthesis....
EVERY single photosynthetis animal (almost every coral) in the sea relies on blue light almost soley and at par and pur levels a plant would burn under!
your description is wrong imo...
Blue light penetrates water better than other wavelengths hence why those creatures rely on the blue wavelength.
Is PPFD/W a real thing? Always thought it was PPF/W. Can you check on that?
Please test or speak on the skyline led.its a fanless light.ideal for stealth.Id like you opinion as im tempted.
Just purchased the 200W MkII Model.I'll test it and post the video when it comes in. Thanks, Shane
@@MIGROLIGHT You are a legend.Thanks for all the great info.I will be watching.👊🏻
@@MIGROLIGHT it's so great you spend your money and get these new grow lights that come on the market and test and share the costs and result comparisons. Question. What do you end up doing with the lights when your done? Sell, use, give away?
Test the HLG 550V2
Are you sure your meter is reading red correctly? Both your tests look exactly like the sellers advertised graphs but with the region of red light's intensity reduced by 50-80%.
Just to follow up. I did a really half-assed spectrum test (photo of light on flat white background analyzed for RGB), and R/B were virtually identical in perceived intensity. Not exactly scientific, but I don't have a $500+ spectrometer. By contrast, your readings look to be about twice the intensity across "blue" vs "red". My cob however has that "red led" coating you point out on your blurple unit completely covering the leds (I've never actually seen one with that cutout before, 99% of the ones on eBay US are like mine... which would explain the increase in red spectrum at least partly. If you get the chance please drop another $2 and try one of the more typical style. You could also pick up a pure red unit (rarer and a different (looks older) style, but available for about $3 instead of $2) to see if it could be used to balance out the blue-heavy nature of the "full spectrum" without introducing an excess of yellow and green light.
I'm also curious about your reflector? I've never held one of your unit's but it appears it's built into the lens. How efficient is it at working with these cheap, backed cobs? As they scatter light in a very nearly hemispheric range without a reflector. They are often sold with a very cheap aluminum/plastic reflector/lens, and I'd be curious to see how that setup compared when used with them vs your setup.
Interesting stuff
Tnx Shane ! Take care! Peace ✌️ from Welland Ontario Canada 🇨🇦
Re-watching some of your vids.
I'm curious, you mention the leds being improved but given the simplicity of the driver the power factor must be feckin terrible.
I get the LEDs won't be great but surely most of that inefficiency lies in the driver doesn't it?
The driver is probably about 70% efficient vs 94% for best in class. The LEDs used would be just as much to blame for the low result. They are only a few Euros each after all.
Nukeheads is putting 10 of these on a sheet of steel and trying to sell it for 500 bucks lol
Not the same lights.
@NukeHeads 3 what a f**king knob head.....fuuuuuuuck bro....your head is so far up your own shit tube its unreal.....fuuuuuuck
@The Muckler I'll have to check it
Really bad leds, did you ever tested good chinese or cheap led? But where to buy a luminus cob led like in your migro?
Excuse my english
No problem:) almost all major brand LEDs are made in China. Cree, Luminus bridgelux etc. You get what you pay for.
I think Shane has skewed the information on this. If you were wanting an input of 35watts per square foot, that'd be about 1.5 foot coverage on an fifty watts. Shan has chosen to test fifty watts cob over a four square foot area. This dillutes the results, therefore hiding the actual efficiency of the cheep cobs. I see lots of praises for the useful information on comments. I actually don't appreciate skewed tests that are obviously skewed to keep the driverless cobs from being competition for him and other producers. That's not scientific or responsible testing. Shame on you Shane. You should redo the tests to redeem yourself in the eyes of the people I've made aware of this.... Adam Bennett.
Could you test done kingbo led grow lights some think there excellent some think there crap perhaps you could debunk then 👍 great video, as expected the eBay cobs are abismal
I've got six of the blurples hes testing and four of the whites. i used one blurple on a seed which grew to a foot and a half tall. Didnt look any different to any other seedlings. But I got a migro 100 and could just turn that down, then up as it grew. Now I[ve got six crap 50w cob lights (tey pulled exactly 50 from whall) and 1 300w and 1 1200w chinese knockoffs of mars hydro. So all for the fucken bin!!! Aaarrgghh....one piece of advice for newbs. Never buy cheap stuff. You[ll cry in the long run. If des0perate, get some cfls. But best advice is to save, and buy once. Also got full HID gear to dispose of. Another fucken waste that was. I got migro aray 4, plus the migro 100. Perfect for me. Good luck guys
!
You could buy a lens to go with the white led and it would bring that number up alot got Love $2 a peace tho
As I understood the video they were tested in a MIGRO fixture with a lens, so I don't think two lenses would bring the numbers up more but maybe would make a nice telescope...
@@TheMindpack that's suppoused be funny??
@@cfsotto only for people with humor. The rest can stop reading after the informative part of the answer.
Oh yeah I just seen that
the 50w label stands for equivalent 50w incandescent or that draws 50w?
I Have ordered A 50w white full spectrum. Havent tested the wattage. but buddy it will damn near blind you!!! So it's up there ide imagine
Almost forgot, yes they will grow. Anything.
samsung lm301 or 561 what I can't hear you?
I was almost about to buy them. Thanks for the info it helped a lot
What is the best led to grow under 200 USD ? Send advise , thanks
Optic 1
DIY
Link please
Meh
Yxo Full spectrum cob
You should test the ming & ben Grow Plant A/C 120v COB I got around 40 par 53 watts almost zero green in the spectrum but way better than these you tested and they where only $.75 per one 53 watt COB.
Can you post a link
@@newname9453 www.aliexpress.com/item/32950621642.html?spm=a2g0o.detail.1000014.47.65fa1bfaugKQXx&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.112281.000000000000000&scm_id=1007.13338.112281.000000000000000&scm-url=1007.13338.112281.000000000000000&pvid=0b3b85f7-4c36-4228-8ca2-17e21506074b
www.aliexpress.com/item/32803849897.html
Your te sd t is terribly skewed on these led Cobs. Do your numbers on a 1.5ftsquare area. You have to know you used too large an area to test a 50 watt chip. You skipped right through it. That ain't cool, shane...
great vid
Test a HLG 550 v2 hell light .
I have a hlg v2 on its way for testing
But why would you use a 90x90 Area to measure that kind of light? I would measure it just directly under it. That Area is way to big. No one would want to light this big area with just a 50W Chip
It's to capture as many photons as possible
Good stuff, keep it up
I want one like that led for 1 plant under 6$
So its bad?
i thought these would do ok
ty
completely irrelevant. *do you have juruparris in the tank?* looks like it but unsure.
Test the chilled
now thats something ! real nice thank you for that been thinking about tinker up a light fixture with cobs But Now il definately Not tinker up one im pushing for the cfls and storebought led ramp instead and pay those 100 £ instead for a premade . For vegetable growing actually not cannabis anymore ! / Paul Roger
Why put a lense over them?
COBs are more efficient with lenses. Otherwise the light is projected at a 150 degree arc.
@@MIGROLIGHT why 150 degrees? its not 180 ???
If you cross Blueberry with Purple Thai, you get Blurple Thai.
Ярко светит?
test one of these ones shane ,, the 1800w x6 cob ones , ebay item no 173621539645
Check out NukeHeads.com, Cody has built some awesome grow lights, totally American made and not these cheap $2 lights, there voice activated and working on chassis and liquid lens....They put out an awesome spectrum and alot of par.....
Alot of people dont trust that guy coady.Beware i would buy nothing from him. Shane you can trust i bet watt for watt efficiency migro would blow away anything coady from nukeheads sells. His nutrients is basically repackaged blue crystalized cheap maricale grow or exact same looking no name stuff. A friend tryed giving me a bottle of his flour power i think it was called. Looks identical to the maricale grow stuff or very cheap no name stuff. Pure synthetic crap good bye good friendly soil life microbiology microbiological life if you force feed your plants that garbage.
@@kkrollingskkrollings3173 Yeah, I've heard all the bullshit, his FPP works wonders, and it's not miracle grow, just because it's the same color, you people listen to all the bullshit people talk about others, I've talked to Cody, I own one of his new lights, your all gonna eat your words, this guy knows what he's doing....Why do you run people in the ground who are working there asses off in America, not giving there work and ideas to China, I think they've stolen enough from our country....And I don't give a shit where your from, you have America to Thank that your not part of Hitler's Nazi Germany, we're taking our country back one small business at a time.......
@@michaelhiggins3382 NukeHeads is a conman who sells junk to dupes. Then again, with all that empty headed nonsense you're spewing, it's no wonder you love it.
@@kkrollingskkrollings3173 I don't know how it works in soil. I use in dwc and it does really good results. And I know all about nukeheads issues but the fpp in hydro is way better then alot of nutrients on the market. I'm not sponsored. I have grown great results with alot of other companies and for the cost and how I use it it kicks ass. I use it with hydroguard and sometimes other additives. But it really can be used as a stand alone all in one nutrient. Works great when adding any company's sweetener.
The Muckler yeah bro, unfortunately some things still have to be sourced from China, I own a construction business and over 80 percent of the steel comes from China or India and it’s junk, you can blame that on Obama giving away American jobs to the Chinese, but everything else Cody uses is American made and built in America, by Americans...
Спасибо за видео, коллега! Полностью с Вами согласен! Использую эти матрицы СОВ (с добавочным синим) в производстве светильников, их синий спектр очень активен. Я их добавляю в общий блок источников освещения на светильниках! Всех Благ! P.S. Пожалуйста, посмотрите мой канал. И страницу rem-stroy-garant.com
Esos chips dan solo 60 lúmenes vatio y no están diseñados para estar encendidos mucho tiempo, se utilizan en vías de paso con un volumétrico que al detectar que vas a pasar enciende el led y cuando pasas se apaga. Es de lerdos que monteis eso para los fines que los montais algunos.
lol 740w for a 2 x 2 hahahaha thats insane
I don't get why would anyone buy a migro lamp. Crazy expensive and definitely not the best out there.
It is a bit pricey. But when you calculate parts and engineering and location of manufacturing and shipping costs. Its actually a nice light. And remember the stuff it grows will pay for it in no time. I would love to someday soon at least get one. But would love to own 4.
@@shakascloset1700 dude don't buy this crazy expensive shit. Make your own! Use some citizen 1216 and some PRB or Samsung lm301b quantum boards and throw this shit away.
@@arnauvizcarramiserachs6318 I didn't say I could afford them. And yes I would do a DIY first before I would ever spend that much for 1 small light.
@@shakascloset1700 don't ever spend money on this brand. It a waste of money when there are a lot of better and cheaper things out there. Just don't do it.
I think many of your vids are very informative, this one sucks. Its way to long jst to tell us the 2 cobs are shit, I miss a recommendation for a better cob. That would complete the video.