DDUUSSSTTIINNN You gotta show some love to that outlander! I wanna see mods to that thing. Its probably the car you've had the longest Nd it gets no love! Like so dustin reads this!!!
the first of many difficult installations in Garage Legends. So happy to see you and your channel reach this point Dustin. sending love from the Philippines! 🇵🇭🇵🇭
Just got done with Bill at Delicious tuning for my 91 tune next is E85. Thank you for convincing me to go this route on my 16 WRX. You are an inspiration bruh. And if you ever need some extra help around the shop let me know. Great video and Stay Strong keep the Faith
You know you're content with life when you actually feel people's joy through a screen. Especially with all the hate being thrown around in today's society. Thanks Dustin
LMAOOO Danny needs to be around these vlogs man I love his energy! He seems like a cool dude and always in a good mood! Type of friends ship you need! I’m actually about to install my ACT Clutch tomorrow ! So good seeing this video 😃😎
I just received the same Clutch yesterday. When taking out the transmission will there be transmission fluid leaking out and thats what you needed the fluid for? So before I start doing mine, do i need to buy the transmission fluid and if so, what fluid should I use?
you and danny changing the clutch is the funniest shit i have seen in years especially with danny benching the trans and him saying that's my shaft with your reply here let me take your shaft out for you..lol
Great video guys. So with the light weight flywheel. How much more do you have to have the rpms up compared to the stock one? I had one in my 01 Audi A4 and it was crazy. Higher
Dean Tha kid I love his content, but it always bothers me when he doesnt do extensive research into stuff like this. The clutch fork absolutely should have been replaced by one from Verus Engineering or something. And honestly he shouldn’t have used the supplied ACT throwout bearing, and should have gone with an OEM 17’ updated tob. Could be wrong tho and they actually supply a 17 with the kit, but I doubt that.
What a funny and cool video. This video reminds me when me and my Dad install the Clutch on a Toyota Paseo that I used to have. Amazing job like always and the BRZ is getting better and better. Take care and see you in the next Vlog ✌️
10:20 Throw out bearing gave out for me at 90k miles. Turns out they upgraded that little part in 2017 a lot of ppl had problems. if u pilling the transmission off might as well replace the whole clutch , Most clutch kits come with that piece.
It works, awesome, lifts fast and all. But the major problem is that it takes the whole side of the car... I don't have one but that's what I've always heard from people that do.
10:58 Your lucky you put the trigger wheel/plate back on the engine, you car wouldn't have started. The crankshaft sensor reads off that plate and knows what position the crank is at lol
Bro! No fuk’ng wayyyy!!! I was nervous about replacing my clutch kit and fork but no prob now thanks 🙏 🙏🙏 My babies gunna get her new clutch kit installed
I hope we see Dan more in the videos!
+1 for Dan the Man
Predator ST thanks qt
“The only thing that’s creeper is the thing that’s on it”😂😂😂😂 then Dustin face had me dying 💀💀 13:47
That BRZ came a long way in such a short time 😭💯🏎
Danny's laugh is infectious I love it! 💯
I like you guys as a duo !! Stay making videos together
Definitely a dope shirt. Shout out From Christchurch New Zealand. Watching RUclips to take my mind off things
Fucking insane what happened there. My condolences. Crazy world we live in.
Yo heard about everything thats happened, condolences to the families who hve lost some1
I send my condolences as well 🙏
Hey look at that! You actually did some big boy work for once.
DDUUSSSTTIINNN
You gotta show some love to that outlander! I wanna see mods to that thing. Its probably the car you've had the longest Nd it gets no love!
Like so dustin reads this!!!
the first of many difficult installations in Garage Legends. So happy to see you and your channel reach this point Dustin. sending love from the Philippines! 🇵🇭🇵🇭
🇵🇭🇵🇭🇵🇭
Just got done with Bill at Delicious tuning for my 91 tune next is E85. Thank you for convincing me to go this route on my 16 WRX. You are an inspiration bruh. And if you ever need some extra help around the shop let me know. Great video and Stay Strong keep the Faith
Man, Danny's laugh... freaking love it 🤣🤣
Damn homie! Literally all the parts I need for the car, you covered in like less than a months time. Brings a tear to my eye.. hurts so good lol
You know you're content with life when you actually feel people's joy through a screen. Especially with all the hate being thrown around in today's society. Thanks Dustin
Dustin & Danny laughing are bro goals
12:21 two boys one transmission lol
I agree too, BRZ has come a heck of a long way in such a short time, it's absolutely awesome now,. Great vid & content, really enjoyed it.👍🇬🇧🇺🇸
1:31 Danny- “Cookies?!” 😂
9:00 best shopping ever❤❤❤❤❤❤❤
This BRZ series is probably my favorite one on RUclips
soundtrack to the vlog was on point!
I can’t get enough of Danny’s laugh 😂
This type of friendship >>>>>
Danny is a stud
LMAOOO Danny needs to be around these vlogs man I love his energy! He seems like a cool dude and always in a good mood! Type of friends ship you need! I’m actually about to install my ACT Clutch tomorrow ! So good seeing this video 😃😎
Congrats on the new garage Dustin! Keep grinding man, you're inspiring a lot of people out there
Sweet video. You guys made this look easy
I just received the same Clutch yesterday. When taking out the transmission will there be transmission fluid leaking out and thats what you needed the fluid for? So before I start doing mine, do i need to buy the transmission fluid and if so, what fluid should I use?
Congrats on the new parts Dustin, can't wait for u to rip it with TJ this weekend
gonna be awesome!
Having your logo on the clutch is dope af! Congrats on everything bro.
Sick brother, diggin' it!
you and danny changing the clutch is the funniest shit i have seen in years especially with danny benching the trans and him saying that's my shaft with your reply here let me take your shaft out for you..lol
0:11 "That's a dope shirt, ACTually."
I see what you did there, Danny. Probably unintentional, but I tend to see puns/dad jokes in everything lol.
Kyle White oh father.....
@@DannyCourtney1 Well that escalated quickly. Lmao. 🤣
Danny is so awesome lol
For a better clutch feel I suggest you change the clutch spring to the Mtec one
Nobody:
James Humphrey:
MORE POWA BABY!
Shawn Luu mo’ powa baby!
Really Needed some Dustin Williams Today🙌🏼😭❤️
SOUND THE ALARM - A SHIRT IS BAGGY ON DUSTIN
3:25 Dan said what time is it right now, when he his phone right there 😂 oh dan
“I am removing your shaft” - Dustin Williams 2019
" pull it out. Let's see it." -Dan 2019 😂
Danny's scream at 12:46 lmao
We want more of Danny he’s comedy
Danny has come a long way. I remember when he knew nothing about cars so good on ya dan 👍
Aaron Soto thanks my man
Great video guys. So with the light weight flywheel. How much more do you have to have the rpms up compared to the stock one? I had one in my 01 Audi A4 and it was crazy. Higher
Dustin you need to get a truck and a nice big trailer to haul your cars!
Light clutch pad will let engine rpm down faster? Because inertia?
Man that packaging is legit AF!!!😮🤯
I just imagined walking past the garage door at 12:40 thinking what’s going on in there? Lol
cant wait to see it how it performs....
Lmao in all forums “do not touch clutch with bare hands” Dustin- touches them with hands covered in oil😂😂
the sounds at 12:28 got me dying hahaha. great video Dustin.
When are you getting a lift bro!!! The shop is coming along and you need one asap! Keep up the great work man!
yeah boy real men at work...boom
The BRZ came such a long long way in no time at all haha can’t wait for what’s next ❤️
I love both of you guys in videos please keep dan in the videos lol ❤️ keep up the great work.
Just 2 dudes laughing while putting a heavy transmission in a car. 😂
Dude’s laugh gets me. 😂
"Pull it out, let's see it"
How many times have I heard that in my life :P
Love what you do dustin ! always have been a fan of your videos. keep it up 😆😆🤙🏻🤙🏻
Something just to recommend getting upgraded is the clutch fork.... the stock one wont hold up since your going to beat it up on the track
Dean Tha kid I love his content, but it always bothers me when he doesnt do extensive research into stuff like this. The clutch fork absolutely should have been replaced by one from Verus Engineering or something. And honestly he shouldn’t have used the supplied ACT throwout bearing, and should have gone with an OEM 17’ updated tob. Could be wrong tho and they actually supply a 17 with the kit, but I doubt that.
I can’t wait to see a lift in Garage Legends. 🔥
1:29 COOKIES!
What a funny and cool video. This video reminds me when me and my Dad install the Clutch on a Toyota Paseo that I used to have. Amazing job like always and the BRZ is getting better and better. Take care and see you in the next Vlog ✌️
13:42 had me dying brooooo😂😂💀💨
Quotes from Danny-
"Pull it out,let's see it"
Yes a longer video!
typical dustin making his buddys do all of the work lol
10:20 Throw out bearing gave out for me at 90k miles. Turns out they upgraded that little part in 2017 a lot of ppl had problems. if u pilling the transmission off might as well replace the whole clutch , Most clutch kits come with that piece.
Trub1n yup just did mine give or take 6 months ago. Clutch, 17’ throwout bearing, and a new shift fork by Verus. 75k at the time.
Next up... WRX TURBO UPGRADE!!!!!
Two guys underneath the BRZ, giggling... lol so cute!
12:28 Bumbocleet...😂 😂 😂
I’m gonna have to buy an ACT clutch now for my wrx hatch
Gotta love getting free merch from companies, I love buying parts and getting stickers or shirts
Jeez dustin looking like a tank
Change the diff fluid and check out all the shavings
Pleaaesseee keep Dan in more of your videos
Dustin you should get a new hand brake so drifting is easier with the brz and maybe in the future go bigger turbo on the evo
harbor freight should have a transmission jack. Wouldn’t hurt to look at least. I know this is a late comment but could help next time.
Can't wait to see it sideways😭 gonna be dope af!
I discovered your channel by watching tj, and I started watching tj after the controversy with smurfinwrx, and now this is my favorite channel 😆
Dustin lifts all the weights and still Danny gets to bench press the transmission 😂😂
Your clutch setup has more detail than some instagram builds ive seen
dustin...you can bench all that weight and you let poor danny boy do it hahaha.
Good to see danny around more.
13.47 😂 and you guys laughed more that you worked 🤣🤣
Dustin, How do you like the Quickjack? Worth the money?
It works, awesome, lifts fast and all. But the major problem is that it takes the whole side of the car...
I don't have one but that's what I've always heard from people that do.
Those free harbor freight micro fibers be hittin different
dustin getting big again!
Maybe I missed it. But was the pilot bearing replaced?
JoLem93 The flywheel has a new one pre-installed
Ripping all those boxes like it was Christmas 🤣😂
10:58 Your lucky you put the trigger wheel/plate back on the engine, you car wouldn't have started. The crankshaft sensor reads off that plate and knows what position the crank is at lol
Christopher Barros that’s good to know
Really want that ramp for my subaru
I prefer when the clutch engages closer to the bottom
Job well done
Legends x ACT
Dustin the BRZ is going to be epic bro😊😊😊😊
It's already epic! 😅👍
Who else got freaked out by that finger when he removed the shifter?
damn an upload as soon as i get home.
YES
I learned on that clutch it sucks the flywheel requires more gas or rpm I ow have switched the disc to the street clutch
Bro! No fuk’ng wayyyy!!! I was nervous about replacing my clutch kit and fork but no prob now thanks 🙏 🙏🙏
My babies gunna get her new clutch kit installed
Oh no 🤦♂️ now when my high school teachers talk about the ACT I’m gonna think of Advance Clutch Technology 😂😂
really nice car and nice color 👍👍
Did you use the ACT throw out bearing? Mine failed in a week lol but I love the feel of the ACT clutch 👌