Hello sir, can u make a video about simulation on microchannel heat exchanger? It would be very useful if u can show the tutorial. If u want the model for that i can send to you.
thank you for your comment, will try to make a tutorial if possible. please send any research paper or book/image regarding such type of heat exchanger. email: ansystutor7@gmail.com
It's not mandatory, if you are making all the parts into a single part ,then the geometry will be meshed as conformal meshing , without any contact surface generated in between them . If you are not doing the parts into a single part , then the geometry will be meshed as non conformal meshing, and will create contact surfaces in between them.
You can do any type of customization in meshing as per your requirement. In this tutorial we have used mainly edge sizing for better cell distribution in radial direction.
Use the fill tool you can create internal domain inside any geometry. I had selected the tool then selected the internal face of the pipe and then clicked generate.
Hi, I would like to perform the simulation of the finned tube in tube heat exchanger in Fluent. I am getting some error. Can you help me to solve this error?
its a very simple geometry follow the tutorial, you can able to do it on your own. If have any difficulties in any stage then please feel free to ask us:)
can u tell how to draw corrugated pipe as middle pipe in this same project ?
ruclips.net/video/9kb-DSND-WY/видео.html
Here is a tutorial on how to create a corrugated pipe, hope it will guide you.
tq tutor❤✌
most welcome. 🙂
Hello sir, can u make a video about simulation on microchannel heat exchanger? It would be very useful if u can show the tutorial. If u want the model for that i can send to you.
if you have any research paper then please send to us ,if possible will try to make a tutorial, ansystutor7@gmail.com
Hello sir. Could you make a vido about water cool screw conveyor?
thank you for your comment, will try to make a tutorial if possible. please send any research paper or book/image regarding such type of heat exchanger. email: ansystutor7@gmail.com
sir can you make video for plate fin heat exchanger
will try to upload a tutorial on this.
can you share full pdf of procedure
Sorry we didn't have any pdf for this.
Is that mandatory to create new part in Design Modeller or is it ok to leave as they are after boolean operation?
It's not mandatory, if you are making all the parts into a single part ,then the geometry will be meshed as conformal meshing , without any contact surface generated in between them . If you are not doing the parts into a single part , then the geometry will be meshed as non conformal meshing, and will create contact surfaces in between them.
@@AnsysTutor thank you
Slm!
Hello sir can you do this problem in fluent 6.3.26, please
You can do it similarly.
@@AnsysTutor i wont but i can't , can you help me , if you send me file in my email , please
Sorry, Currently dont have this file.
@@AnsysTutor But you can only do it at the moment of the gambit file
Beacause i don't work geometrie in gambit
hi bro i have a question, why in this tutorial you dont use face mashing?
You can do any type of customization in meshing as per your requirement. In this tutorial we have used mainly edge sizing for better cell distribution in radial direction.
Thank you for the video :) How to delete other two filled region (inner pipes)? if we don't need them!
Is suppressing the body is the solution?
You can unite them using Boolean tool or you can edit the sketch.
Hello sir could you make a counter flow heat exchanger model for Nanofluids? Using the cooling fluid as nano fluid ! Thanks a lot I would be grateful
Hi, can you analyze the flow of the plate heat exchanger ?
Hi where from you are i have work for you
Give me the link of this program, beacaus i wont to dawnload, please
ruclips.net/video/E5iE_Klj3A8/видео.html
In time 4:46 I did not understand how you did fill 1 !!!!!!!
Use the fill tool you can create internal domain inside any geometry. I had selected the tool then selected the internal face of the pipe and then clicked generate.
Hi,
I would like to perform the simulation of the finned tube in tube heat exchanger in Fluent. I am getting some error. Can you help me to solve this error?
what is the error message?
I am getting an error of solid-liquid interface. How should I solve it?
This is what I needed. Thanks a lot Sir.
but it is very hard to select internal faces in a complex assembly
You can hide unnecessary parts while selecting.
@@AnsysTutor how to hide sir?? Is there any specific tool for that?? Please help sir🙏
PLEASE CAN YOU SEND ME A GEOMETRY FILE
its a very simple geometry follow the tutorial, you can able to do it on your own. If have any difficulties in any stage then please feel free to ask us:)
@@AnsysTutor THANK YOU
most welcome:)
Thnx Sir
most welcome:)
dear sir, part 2, please
Here it is ruclips.net/video/oJEZh6236jg/видео.html