Yeah this is something I’d probably just let professionals do for me instead of messing something up myself lol Thanks for this detailed video. A lot of respect to you guys putting in this quality work and craftsmanship
@@circuitdemon_ In the middle of doing the retro fit and I'm missing one of my 9005 washers for the projector 😭 Only one of the boxes came with it, I wish I hadn't taken my headlights apart without looking for both of them first. I sent you guys an email about getting the missing part
Hey man, appreciate the high quality content. I'm about to tackle this project on my rig pretty soon and look forward to using this as a guide although i'm not doing it on a subie! my only concern is that my highbeam is also my drl and i want to install quad halos so im not sure how that will work out, but i will be on the lookout and continue researching other content to see if my questions are answered! keep up the solid work.
Whaaaatttt!!! You just made my day!!! Had no idea how to make a bixenon H1 (actually HID H1 Bixenon) when I have a female 9005 setup for my stock high beams. I'm so ditching that and buying this instead. I don't need a bixenon for high beams my low beam is a Q45 projector plus I have Halos surrounding both projectors so I don't need an even bigger headache this video is like Excedrin Migraine relief thank you 🙏
If I am going to run a setup with these as the high beams what HID projectors would work for the low beams that aren’t bi xenon. I’d need mini as well to fit a 2012 civic.
Pretty cool. So theyll work fine with the housings cover back on right? What sealant would I use to adhere the cover back on? Also,these dont require a ballast? Pff nm.lol.I didnt realize that these kits were for Subarus. But I assume I can use them on anything as long as I get the correct connector?
I have low and high beam in my projector light with demon eye.On the low beam side. If I tie the stock high beam headlight into the projector light would it hurt anything? The reason is now I have a factory high beam bulb in its socket but is not connected.
Do you know if these high beam projectors would work as a drl as well? I'm retrofitting some into a pair of honda accord euro headlights i imported from japan onto my tsx, and it's an actual pain to switch drl source since it's canbus controlled
They do not have a DRL power setting, they would be just full bright. I would check out these guys if you need a high beam projector with a DRL setting: circuitdemon.com/products/led343?_pos=2&_psq=hi+lens&_ss=e&_v=1.0
These things always look great but if you don't know someone willing to risk there inspection license you can't get inspection cause the bazztards,buzzards say right on package, not legal for headlamps in usa only for fog lamp use,,would love to do projectors but you won't get a sticker in my state,lol
![How To Install Retrofit Projectors With Bi-Xenon [10 Steps]](http://i.ytimg.com/vi/aesyBC6sSjY/mqdefault.jpg)
![How To Install Retrofit Projectors With Bi-Xenon [10 Steps]](/img/tr.png)
Yeah this is something I’d probably just let professionals do for me instead of messing something up myself lol
Thanks for this detailed video. A lot of respect to you guys putting in this quality work and craftsmanship
I'm so glad this video came out right now! I'm about to do install mine this weekend
Awesome! Good luck and let us know if you have any questions!
@@circuitdemon_ In the middle of doing the retro fit and I'm missing one of my 9005 washers for the projector 😭
Only one of the boxes came with it, I wish I hadn't taken my headlights apart without looking for both of them first.
I sent you guys an email about getting the missing part
I've never heard of an ultrasonic cutter before today! Thanks!
Makes cutting plastics so much easier!
Hey man, appreciate the high quality content. I'm about to tackle this project on my rig pretty soon and look forward to using this as a guide although i'm not doing it on a subie! my only concern is that my highbeam is also my drl and i want to install quad halos so im not sure how that will work out, but i will be on the lookout and continue researching other content to see if my questions are answered! keep up the solid work.
You may need to disable the DRL feature!
Whaaaatttt!!! You just made my day!!! Had no idea how to make a bixenon H1 (actually HID H1 Bixenon) when I have a female 9005 setup for my stock high beams. I'm so ditching that and buying this instead. I don't need a bixenon for high beams my low beam is a Q45 projector plus I have Halos surrounding both projectors so I don't need an even bigger headache this video is like Excedrin Migraine relief thank you 🙏
what shrouds are you using?
Is that shroud the mini Gatling gun? It looks much bigger than in the pictures. The projector itself looks bigger than in the pictures too.
If I am going to run a setup with these as the high beams what HID projectors would work for the low beams that aren’t bi xenon. I’d need mini as well to fit a 2012 civic.
Thank you Jordan! You guys should link this video to your DIY kits :)
This awesome! wish this would have been out before i did mine! lol.
What shroud did you guys use for this retrofit?
Because I don't know... if the bulb burns out in the Morimoto, do you have to disassemble the entire housing again? Or am I missing something? Thanks.
Pretty cool.
So theyll work fine with the housings cover back on right?
What sealant would I use to adhere the cover back on?
Also,these dont require a ballast?
Pff nm.lol.I didnt realize that these kits were for Subarus.
But I assume I can use them on anything as long as I get the correct connector?
I have low and high beam in my projector light with demon eye.On the low beam side. If I tie the stock high beam headlight into the projector light would it hurt anything? The reason is now I have a factory high beam bulb in its socket but is not connected.
I literally just finished doing my set 😂
Hope it came out super dope!
Do you know if these high beam projectors would work as a drl as well? I'm retrofitting some into a pair of honda accord euro headlights i imported from japan onto my tsx, and it's an actual pain to switch drl source since it's canbus controlled
They do not have a DRL power setting, they would be just full bright. I would check out these guys if you need a high beam projector with a DRL setting: circuitdemon.com/products/led343?_pos=2&_psq=hi+lens&_ss=e&_v=1.0
Are shrouds necessary for install? Or can I just chuck them up in new depo housings?
You can just toss them in, but they will look a little odd with the hardware exposed on the front of the projector. The shroud is purely aesthetic.
Can I fit this on my w211 high beam?
outbut TEEEEEEEEST!
You guys should sell the gills for 08-14 on the circuit demon website
Unfortunately we do not sell the gills for DIY kits as we like to keep them for in house exclusive builds only!
Is it legal to install highbeam projector?
All depends on your local laws
I need this
Does it fit sti 2011?
Yes it does 🤘🏼
These things always look great but if you don't know someone willing to risk there inspection license you can't get inspection cause the bazztards,buzzards say right on package, not legal for headlamps in usa only for fog lamp use,,would love to do projectors but you won't get a sticker in my state,lol
it looks like you got nothing for Toyota ?
We do! Email the team and we would love to help you out! sales@circuitdemon.com
(Suzuki Swift) (2nd) generation headlight) 😢😢😢🙏🙏🙏🙏🙏🙏🙏🙏please please 💌💌💌✨♥️♥️♥️😔😔 sir