How to: Simple Valve adjustments, raptor 700

Cuervo ATV Raptor 700 specialists
951-743-6328 [e-mail]
/ cuervoatv
www.ebay.com/u... Cuervo Racing Raptor 700 specialists
951-743-6328 [e-mail]
m.facebook.com...
www.ebay.com/u...

[@unlawfulriding4092]

I love the comment on if you can’t take your gas tank off you shouldn’t be working on your motor😂😂😂😂 pure gold

[@cbr1thou]

Blah blah blah

[@aaronsierra5067]

Would it be bad if I didn’t change the O-rings. My quad only has 15 hours on it….. I appreciate it Thank you!!

[@indiancreek1570]

I have a 07 king quad 450, 1000 miles on it, after it warms up, it makes a slight ticking sound from the top of engine, this procedure your doing ,would this stop it , or is this normal, thanks great video

[@robertcraciun9587]

What’s the stock lash for intake and exhaust valves?

[@mrad6533]

I bought a 2022 about 20 hours should I be doing it now thanks

[@700chavo]

Every 60hr check them and re adjust them if off spec

[@fast2valve559]

I set timing chain on my buddys grizzly 700 which has the same engine as your raptor. I line the tdc mark on the flywheel with the mark in the screw hole that you look thru for timing marks and i set the cam sprocket with the mark lined up with the smaller triangalur tit on the case at the top of the cam sporcket but when we try to crank it, it shoots fire out of the throttle body and backfires. Any ideas whats wrong? Its got me stumped

[@mathewdavila7719]

The top number is in MM correct? For example.005mm is the top# followed by .127 in thousands?

[@MrCuervoRacing]

.005 would be thousandths

[@whyteboi0011]

When full throttle there is a ticking noise from my exhaust i’m not sure if it’s cause of my valves

[@rudycornelius5119]

So .005 is what used for hotcam 3? And the intake?

[@johndumas4467]

Hi... I know that this is not a Bruin video but I am wondering if you might me able to help me out a bit anyway? I have looked everywhere and I get different valve clearance setting recommendations from different places I look. Can you help me out? I have a 2006 Yamaha Bruin, Model: YFM350A - Vin: 5Y4AH10Y66A021826. The other thing is, my feeler gauge has both Metric and Inches. If you can help me out with the correct clearance settings, please tell me if they are to be used with Metric or Inches on my gauge? >

[@1ttcobra2003]

What chain wack protector is that?

[@supnacho7454]

You don’t sell those covers anymore ?

[@heatherdewberry1128]

Is there different settings between valves

[@MrCuervoRacing]

Yes. Intake and exhaust valves normally see a different spec.

[@lil__glizzy]

If it’s not set right will it still crank

[@MrCuervoRacing]

marquis fields if the valves are too tight or too loose the engine will still crank over(turn with starter) but may not fire if excessively tight

[@GametimeSlime]

@@MrCuervoRacing BINGO i was about to ask that same question my yfz is cranking but not starting. Im scared to check it's valve clearance i don't know what ill need if i do have to replace things. Shims

[@MrsBuddevil]

Great. Please help I have 4 feeler gauges here, but i missed out on 4th grade fraction and decimals. All my gauges have an extra 0 before the .