Thx a lot! I fixed my dashboard light going off today. First I assumed it was the connector so I de-pin all the wires to bend each one and improve the connexion, although some was loose it didn't fixed the issue. So then I disassembled and saw on the pcb some of the 8 hard wires had bad contact to the connector, so I soldered all of them and it fixed it ! For people thinking it's the potentiometer, I dont think so, at least mine was giving the right value.
I have a 2000 Ford Focus ZTS without fog lights....The problem i am having is when i turn on headlights or parking light i blow a 10amp fuse under the driver side dash everytime??
Is this a question or a statement? You have a short circuit there, DON’T put a “bigger” fuse (unless you want Focus BBQ), take it to a service, explain to them the problem, they will take care of it.
Did it fix the problem with your light switch...Replacing the switch??
2 года назад
In case anyone is having the same issue i found the problem. There are cold solderjoints in the headlight swicht. I have videos in my channel about the fix
Salut. Ai idee ce face pozitia din stanga butonului, are un semn cu "PE". Am dat la stanga maxim si nu se intampla nimic.. am cautat pe net dar nu am gasit nimic..
Salut am si eu o intrebare,rotita din dreapta jos,aceea cu indicatorul unui ceas ce rol are?Si in ce pozitie ar trebui sa o tin?Multumesc si sper sa mai faci videouri pe viitor :D am si eu un Focus din 2003 si e o masinuta foarte buna.
had the same problem with my 2002 Sw Ghia, sometimes its on sometimes its off , i bet its the switch is damaged , but i will try to clean it first because a new one its almost 130€ in portugal, is just to much for a switch! btw had you tried a new switch? thanks for the video !
Daca tot am nimerit pe videoclipul tau si nu am gasit 100% ceea ce cautam sa vad in video, ai idee cum pot sa gasesc beculetul din el pentru a il inlocui ? Ma refer la becul ce il lumineaza in masina cand pornesti pozitiile.
Thx a lot! I fixed my dashboard light going off today.
First I assumed it was the connector so I de-pin all the wires to bend each one and improve the connexion, although some was loose it didn't fixed the issue.
So then I disassembled and saw on the pcb some of the 8 hard wires had bad contact to the connector, so I soldered all of them and it fixed it !
For people thinking it's the potentiometer, I dont think so, at least mine was giving the right value.
Did replace mine today when installing front fogs, this guide is perfect😊
Saludos desde Mazatlán Sinaloa
Muchas gracias muy bien explicado
Best comment ever "please subscribe so youtube don't screw me for less than 1000 subscribers" . I will subscribe just for that.
I have a 2000 Ford Focus ZTS without fog lights....The problem i am having is when i turn on headlights or parking light i blow a 10amp fuse under the driver side dash everytime??
Is this a question or a statement?
You have a short circuit there, DON’T put a “bigger” fuse (unless you want Focus BBQ), take it to a service, explain to them the problem, they will take care of it.
Thanks man! 🤟🏻🤟🏻🤟🏻
Hello! I have the same problem with my 2002 mk1. Does cleaning the contacts solved it permanently? Thx.
Hi, it solved it for a few days, then it came back. I want to replace the switch and see if that's the problem.
I think I will try that too :) hopefully it fixed it for mine too.
*permanently :D
Did it fix the problem with your light switch...Replacing the switch??
In case anyone is having the same issue i found the problem. There are cold solderjoints in the headlight swicht. I have videos in my channel about the fix
Salut. Ai idee ce face pozitia din stanga butonului, are un semn cu "PE". Am dat la stanga maxim si nu se intampla nimic.. am cautat pe net dar nu am gasit nimic..
Nu e PE, este semnul de la pozitiile de parcare.
Aprinde pozitiile fara sa ilumineze bord-ul.
The lighting in the seriece plaat does not work, and I do not know if there was a fuse for it ..THANKS
Is this a trick question? Or is it a question at all?
@@N33sWorkshop I'm asking you. .the services plaat light don't work. I tried to looking for fuse
But I didn't find it..thanks
I’m still not sure what light you’re talking about...
Thank you.
I wanna change the bulbs, but with that structure, I'm really not clear, can you make a video how to change the actual bulbs
Theeee bulbs in the switch? Or the bulbs in your headlights? Because I have a video on how to change headlight bulbs. The switch has LEDs.
@@N33sWorkshop yeah the leds on the switch, i didn't know focus has lights on the switch, or mine are like f-ed up!
First check the connector, then if it’s still not working, change the whole switch, it’s easier.
@@N33sWorkshop hey, what led bulbs are appropriate for the switch? I'm planning to order 👋
I am looking for a diagram of this connector, what cable is from what
Sorry, cant tell from memory
Salut, am și eu o problema, cu farurile , gen când pun contactul mi se aprind direct farurile(faza scurta) ce pot sa fac?
Masina e din Suedia, Norvegia, tarile nordice?
E un fel de DRL de pe vremea aia. Sau cineva s-a apucat sa faca minuni...
@@N33sWorkshop este din Austria!
Salut am si eu o intrebare,rotita din dreapta jos,aceea cu indicatorul unui ceas ce rol are?Si in ce pozitie ar trebui sa o tin?Multumesc si sper sa mai faci videouri pe viitor :D am si eu un Focus din 2003 si e o masinuta foarte buna.
Salut, rolul lui este de a regla intensitatea luminii din bord, de la vitezometru, turometru.
Mersi
had the same problem with my 2002 Sw Ghia, sometimes its on sometimes its off , i bet its the switch is damaged , but i will try to clean it first because a new one its almost 130€ in portugal, is just to much for a switch! btw had you tried a new switch? thanks for the video !
No, I ghetto rigged some wires in the end... there is a potentiometer in the switch, that goes bad.
hmm, that sounds a bit harder to do , im not a big expert at car electronics , but thanks for your reply !@@N33sWorkshop
ruclips.net/video/IJaOStukD6U/видео.html
Daca tot am nimerit pe videoclipul tau si nu am gasit 100% ceea ce cautam sa vad in video, ai idee cum pot sa gasesc beculetul din el pentru a il inlocui ? Ma refer la becul ce il lumineaza in masina cand pornesti pozitiile.
Alea sunt LED-uri SMD lipite pe placa.