A High Performance Outdoor FM Booster

Поделиться
HTML-код
  • Опубликовано: 8 фев 2025
  • BoostMan FM Booster circuit was developed to serve the signal thirst of FM radio receivers and high-end FM tuners by providing a signal quality never experienced before. It includes an outdoor mast mounted high gain VHF LNA and an indoor PSU cum control unit.
    **Full web documentation of the project, actual size PCB layout etc available@ below link:**
    www.transistor...
    Unique and simple circuit that can be built at your home using a couple of components within minutes!
    Outdoor mast mounted high gain low noise amplifier and Indoor signal gain control cum PSU
    High quality stereo reception
    Enables FM Dx. Now receive your favorite FM stations from farther distances, that too in stereo
    Low cost, no complexity, extremely simple circuit design.
    Indoor gain control offers large dynamic range even over strong local signals, which means you can connect low-end portables also to the booster without worrying about front-end overloading.
  • НаукаНаука

Комментарии • 42

  • @nilr9mi
    @nilr9mi Год назад +3

    Design of circuit is taken by VHF TV signal booster. But they were multi transistor stages. High gain. This circuit can also be design multi transistor stages for fringe area.
    I think, BF 200, C5570 or 2N 918 transistor can good work in FM frequency range.

  • @RAJKUMAR-zf1fe6517
    @RAJKUMAR-zf1fe6517 Год назад

    Very very nice

  • @jijeshkorothpoyil2697
    @jijeshkorothpoyil2697 11 месяцев назад +1

    എവിടെയാണ് നിങ്ങളുടെ സ്ഥലം?
    Booster vachappol additional stations ethra kitti?

  • @fathimarahmathullah1256
    @fathimarahmathullah1256 3 месяца назад +1

    Can you post the schamatic diagrame?

  • @anjanar447
    @anjanar447 2 года назад +1

    Hi
    Nice detailed video☺️👍

  • @vinayakbhamare4490
    @vinayakbhamare4490 2 месяца назад +1

    I want one pc. Can you provide me ? At what cost ?

    • @radiofm7694
      @radiofm7694  2 месяца назад

      @@vinayakbhamare4490 You can make it your own 👍

  • @PanganWae
    @PanganWae 9 месяцев назад

    transistors are active components that require a power supply; Is this possible to strengthen the signal?

  • @devarajans2881
    @devarajans2881 11 месяцев назад +3

    Normally higher frequncies glassepoxy is preferablle withproper shielding between input and out put stages to prevent self oscilation

  • @hussoohussoy-xs5wr
    @hussoohussoy-xs5wr Год назад

    I talk with you before..if you remeber i said i made your circuit...
    You said you use kenwood car stereo to dx
    Can you check inside radio which ic number used on tuner block ?
    Please¡¿

  • @BollywoodRadio.
    @BollywoodRadio. 2 года назад +1

    पुराना टीवी बूस्टर और एंटीना को भी लगा कर बूस्ट कर सकते हैं सर... पर अब वो मार्केट में उपलब्ध नहीं है.
    आपका ये बूस्टर बहुत सही है

  • @bronewid4625
    @bronewid4625 Год назад +1

    Its can connect with transmitter?

  • @avinash3632
    @avinash3632 Год назад +1

    Need 1 can u provide by paying

  • @pawank.patidar
    @pawank.patidar 2 года назад +1

    Band pass filter kaha available hai?

    • @radiofm7694
      @radiofm7694  2 года назад

      Aliexpress mein available hai ji

    • @pawank.patidar
      @pawank.patidar 2 года назад

      @@radiofm7694 after covid AliExpress not send any item to India

  • @meenakshic4240
    @meenakshic4240 2 года назад +1

    1 pce need available?

    • @radiofm7694
      @radiofm7694  2 года назад

      You can build one your own, all details provided 👍

    • @hussoohussoy-xs5wr
      @hussoohussoy-xs5wr Год назад +1

      @@radiofm7694 thanks to share it with us🙏🙌

  • @ranksa2802
    @ranksa2802 2 года назад +1

    Booster connect cheyyatheyum cheythum dfrnce kaanikkamo? Anyway nice work bro!

    • @radiofm7694
      @radiofm7694  2 года назад

      Thanks for your comment. This booster is very effective, try it 👍

  • @balasubramanianvelusamy2196
    @balasubramanianvelusamy2196 3 месяца назад +1

    You had any PCB

    • @radiofm7694
      @radiofm7694  3 месяца назад

      You can make it

    • @balasubramanianvelusamy2196
      @balasubramanianvelusamy2196 3 месяца назад

      For one PCB we can make positive and screen printing and ferric chloride process. Sorry

    • @radiofm7694
      @radiofm7694  3 месяца назад

      @@balasubramanianvelusamy2196
      You can try manhattan style wiring, or make it on a general purpose dot pcb. It's a simple circuit, try any simple wiring methods you'rs comfortable with.

    • @balasubramanianvelusamy2196
      @balasubramanianvelusamy2196 3 месяца назад

      OK. Thanks

  • @AydhinAydhu
    @AydhinAydhu Год назад +1

    Anik oru booster undaki tharamo
    a

  • @manus4851
    @manus4851 2 года назад +1

    Good

  • @labofelectronicsbasics
    @labofelectronicsbasics 2 года назад +1

    Good. മറ്റേ മോസ്‌ഫറ്റ് ബൂസ്റ്ററും demo വയ്ക്കു

  • @ganeshlohar2181
    @ganeshlohar2181 Год назад

    Send all details

  • @sivanct2004
    @sivanct2004 8 месяцев назад

    Bro എനിക്ക് ഒന്ന് ഉണ്ടാക്കി തരുമോ

  • @NizamNizam-q8c
    @NizamNizam-q8c 11 месяцев назад +1

    Boster orannam vanam

  • @AydhinAydhu
    @AydhinAydhu Год назад +1

    Orubooster vanam

  • @LucianoSuarez-sq7jp
    @LucianoSuarez-sq7jp Год назад

    Poor design if you use RF. It looks like a poor quality audio amplifier

  • @NizamNizam-q8c
    @NizamNizam-q8c 11 месяцев назад

    Anikum orubooster vanam

  • @vintagetransistorRadio.Radio.h
    @vintagetransistorRadio.Radio.h 5 месяцев назад

    Thanks for sharing.
    Your contact number.
    Sir your are i Thanks.
    Ham radio group.
    Maber .

  • @RAJKUMAR-zf1fe6517
    @RAJKUMAR-zf1fe6517 Год назад +1

    Very very nice

  • @RAJKUMAR-zf1fe6517
    @RAJKUMAR-zf1fe6517 Год назад +1

    Very very nice