Bro never put your hard baits in with salty soft plastics. You're asking for rusted hooks and split rings which can cause you to miss a big one lol. As for the truck you've either got the clutch, master cylinder or slave cylinder gone out. Does the pedal have any pressure at all???
TJ, former transmission builder here. Check the linkage before assuming the clutch is toast. Especially if the pedal feels normal, and there was no gradual deterioration in drivability. If it went from great to gone, I say linkage dawg.🤙 Happy BDay to April🎉
When April saw open and deeper water, and thought to change to a lipless crankbait. As a life long fisherman, I got goosebumps! Good job, YakPak, good job!!! Happy birthday, FredRig. 🥳🤣
April happy Birthday Cheers Yak when you showed the issue on your truck you pushed the stick forward and did not hear the gears grinding. Your linkage that attaches your shifter to the transmission may have dislodged. There may be a pin that connects the shifter to the leveler on the transmission Lift the truck and look at the transmission the leveler will usually be on the side down by the oil pan.
Happy birthday April and I'm with the 1 solostar. Check your linkage and clutch travel under the flywheel housing. The clutch is either stuck in the disengaged position or it's trashed. Hopefully just needs adjusting
Just found your channel, my buddy is getting me into fishing and this shows me how exciting it can be. Going to probably go back to older videos to see how you set stuff up. Happy belated birthday April.
@fishingwithyakpak id check the clutch slave cylinder or could also be a pressure plate issue. Happy birthday april!. Also if yall are ever back up in columbus, ga check out summerland outdoors they have rods and reels that will blow your minds!
The next time you go to Alabama there is a store called Shelton in molten and it has discount fishing baits and fishing reels and rods for cheaper than most retail stores
First of all Happy Birthday. I Carnt do at much fishing as I used too due bad health. So live it through you guys. Love your vids keep them coming. From UK 🇬🇧
Awesome YAKPRIL video like always 👍👍👍.. As for truck looks like Linkage . If it was anything else you still would feel it or hear it trying to go into gear. But the way that did check Linkage.. HAPPY BIRTHDAY TO YA APRIL 🎉🎂.. Yall stay safe and Keep’em coming
There are many reasons why that may happen to your transmission, but from what you showed us if I had to take a guess I would say take a look at your shift linkage, slave cylinder, or pressure plate for your clutch. It’s hard to tell if your pedal has resistance when your pushing it down or if it’s soft and has no pressure.
Happy birthday to you April birthday bass 🐟!!! Enjoyed watching you too fish I wish me and wife could fish together she doesn't like to fish or eat fish either I love it!!!
A lot of Toyotas have like these two t clips that connects the linkage to your shifter. If it’s a hydro transmission then I’d say throwout bearing you can hear it before you went through the gears. Hard to know not being there feeling the clutch. It could even be the fork going into transmission. Let me ask you a question did it start doing this after you filmed the raycon advertisement?
Happy Birthday April. I always wear my fanny pack fishing. So convenient to have extra baits, hooks and weight,scale and pliers right there for easy quick access. You definitely need a new clutch.
I absolutely love the fact that I can get fishing tips and pointers as well as learn to troubleshoot clutch issues thru your comment section....I thought you asking viewers personalizes or makes you seem more personable....cool
You can hear it go into each gear BUT I heard zero resistance when you loaded and unloaded the clutch... I'd say either your clutch is stuck wide open (disengaged) or... snapped shaft.. IF you didn't hear a loud bang and immediately lose all drive.. I'm leaning towards stuck .
I've got a shoulder sling backpack that just so happens to work as a big ass fanny pack. I have had the thought of building an actual dedicated tackle fanny pack that can hold a 3600 size tackle box and several soft plastics as well as terminal tackle, line, pliers, and other essentials. I think it would be a hot item for real.
Wish we had the fishing opportunities up here in Canada that you guys have. Here the lake has to be deep enough to not winter kill. No such thing as pond fishing here.
Bro I feel your pain on the catch and release! I see people throwing any size fish in a bucket down here in Ft. Lauderdale.. the canals are getting depleted.. the C-11 use to be loaded with fish when I was a teen I use to fish it all the time 2006ish now there’s nothing you don’t even see bait fish swimming
I am gunna to have to agree, man. With everyone else. I rebuilt transmissions for a long time for while working st automotive dealships and mom n poo shops. It is probably your clutch, either it is out of alightment, completely shredded or the linkage. Another think it would be is the gears have worn down so much you have a bunch of metal gunk in the transmissions. More likely not but possible. I strongly recommend you get it looked at Happy birthday to your Ole lady Love the videos brother
Man I’m gonna go buy some lizards now… I’ve been rocking with some red and blue ribbon tail worms this summer. Landed a 4 pounder and had a few other 2 pounders today at a pond in a nearby town in Illinois. Always lookin to broaden my horizons though.
Check linkage and fluid levels if that shows to be good then it’s a good possibility you need a clutch and pressure plate but if it was good when parked then just gone I’d say linkage issue
I work on cars every day if your pedal feels like it should it’s not gone but I will say best thing to do is take it somewhere let them look at it because there’s a few things that could be wrong some easier fixes than others
Go to buyraycon.com/fishing for 15% off your order, plus free shipping!
Bro never put your hard baits in with salty soft plastics. You're asking for rusted hooks and split rings which can cause you to miss a big one lol.
As for the truck you've either got the clutch, master cylinder or slave cylinder gone out. Does the pedal have any pressure at all???
U try selling those Fanny pack with all of your favorite fishing baits n sell it I'll buy 2 for sure bro 👍💯🙏🎣🎣🎣🎣🎣🌴😎🎣🎣🎣🎣🌴😎
Clutch or pressure plate is shot on your truck
We’re u fishing in Hilton head island I think I know that pond
TJ, former transmission builder here. Check the linkage before assuming the clutch is toast. Especially if the pedal feels normal, and there was no gradual deterioration in drivability. If it went from great to gone, I say linkage dawg.🤙 Happy BDay to April🎉
Ooh good call on the linkage. Been so long since I’ve driven a manual I didn’t even think of that
Just what I was getting on here to say!
Thanks for the info!
I'd say the shifter pawl broke off inside the transmission
Came here to say this lol
First Trey now YakPak and April. Today is a great day! Come on Ayo/Smalls for the trifecta. 😃
Don't forget the gravy
What's treys channel?
@@TheJergy itstreyway
When April saw open and deeper water, and thought to change to a lipless crankbait. As a life long fisherman, I got goosebumps! Good job, YakPak, good job!!! Happy birthday, FredRig. 🥳🤣
Yak, did you hear what you said? "It's April's Birthday and all she wants to do is go fishin'." I mean... Just... (insert Shia LaBeouf clapping here)
Happy Birthday April!! I am soooo impressed on what a great Fisherwoman you have became! Love to see you out with Yak all the time!
April happy Birthday Cheers
Yak when you showed the issue on your truck you pushed the stick forward and did not hear the gears grinding. Your linkage that attaches your shifter to the transmission may have dislodged. There may be a pin that connects the shifter to the leveler on the transmission Lift the truck and look at the transmission the leveler will usually be on the side down by the oil pan.
good to see her back for another vid and sharing the excitement and experience with you yak 🤙🏻 happy birthday
Maybe the shift linkage? Also happy birthday Mrs. April.
Happy birthday April and I'm with the 1 solostar. Check your linkage and clutch travel under the flywheel housing. The clutch is either stuck in the disengaged position or it's trashed. Hopefully just needs adjusting
Just found your channel, my buddy is getting me into fishing and this shows me how exciting it can be. Going to probably go back to older videos to see how you set stuff up.
Happy belated birthday April.
You’re gonna have a blast! I literally have TONS of videos breaking down everything you’d need or want to know. Enjoy the channel 😁
Great video smashed the bigguns. Happy birthday April.
@fishingwithyakpak id check the clutch slave cylinder or could also be a pressure plate issue. Happy birthday april!. Also if yall are ever back up in columbus, ga check out summerland outdoors they have rods and reels that will blow your minds!
❤❤❤ watching you two fish together is my favorite fishing content! And April happy birthday 🎉
Happy Birthday April! Yak, your channel is amazing, but she brings it to the next level
New clutch time. Happy BornDay April
April: "Knock, knock, he was home!!!" 🤣🤣🤣🤣🤣
YakPak loving the mustache an sideburns
Great video, what do you use to shoot your video?
Sony FX3 and GoPro 11’s
The next time you go to Alabama there is a store called Shelton in molten and it has discount fishing baits and fishing reels and rods for cheaper than most retail stores
Throwout bearing on the transmission?
First off happy birthday to April and check the slave and master cylinder for the clutch those can cause you problems like that
Happy Birf Day April!! 🥳 🎂 I see her rockin that Vanford. Love my Shimano and Pflueger spinnin reels. 🎣 💪🏼
Yak park is the shifter hooked up under truck where it goes into the transmission the linkage or clutch is shot
First of all Happy Birthday. I Carnt do at much fishing as I used too due bad health. So live it through you guys. Love your vids keep them coming. From UK 🇬🇧
Happy Birthday April!!! My favorite Month of the year!!! your car needs a new clutch, great video!
How you setting up your slizzard?? Love setting them up in a weedless setup
Sounds like something has permentantly engaged yr clutch. You may need a new one. Certainly get it checked ASAP. Happy birthday Mrs Pak!!🎉🎉
Awesome YAKPRIL video like always 👍👍👍.. As for truck looks like Linkage . If it was anything else you still would feel it or hear it trying to go into gear. But the way that did check Linkage.. HAPPY BIRTHDAY TO YA APRIL 🎉🎂.. Yall stay safe and Keep’em coming
There are many reasons why that may happen to your transmission, but from what you showed us if I had to take a guess I would say take a look at your shift linkage, slave cylinder, or pressure plate for your clutch. It’s hard to tell if your pedal has resistance when your pushing it down or if it’s soft and has no pressure.
It’s always a great day when yak posts a video and happy birthday to the Fred rig slayer!!
Happy birthday to you April birthday bass 🐟!!! Enjoyed watching you too fish I wish me and wife could fish together she doesn't like to fish or eat fish either I love it!!!
A lot of Toyotas have like these two t clips that connects the linkage to your shifter. If it’s a hydro transmission then I’d say throwout bearing you can hear it before you went through the gears. Hard to know not being there feeling the clutch. It could even be the fork going into transmission. Let me ask you a question did it start doing this after you filmed the raycon advertisement?
Just got back from taking my daughter fishing to see your video what a day happy birthday April
Happy Birthday April!! Glad you kicked butt!!
Just happend to my truck a couple months back if was my shift forks but could also be a broke linkage
Happy birthday to April and amazing video content great catches
Happy Birthday April. I always wear my fanny pack fishing. So convenient to have extra baits, hooks and weight,scale and pliers right there for easy quick access. You definitely need a new clutch.
Clutch plate is out in it i had a truck 10 years back do this changed the clutch plate out and it shifted again and drove
I absolutely love the fact that I can get fishing tips and pointers as well as learn to troubleshoot clutch issues thru your comment section....I thought you asking viewers personalizes or makes you seem more personable....cool
Man the viewers have helped me with SO much stuff throughout the years it’s crazy! I always appreciate it 😁
You can hear it go into each gear BUT I heard zero resistance when you loaded and unloaded the clutch... I'd say either your clutch is stuck wide open (disengaged) or... snapped shaft.. IF you didn't hear a loud bang and immediately lose all drive.. I'm leaning towards stuck .
Need New clutch pressure plate and throw out bearing. Or if you're really lucky might be Shift Linkage.
I've got a shoulder sling backpack that just so happens to work as a big ass fanny pack. I have had the thought of building an actual dedicated tackle fanny pack that can hold a 3600 size tackle box and several soft plastics as well as terminal tackle, line, pliers, and other essentials. I think it would be a hot item for real.
Happy Birthday Miss April!!!!
Clutch is Toast.
Love it All!!!!
Or linkage
First time watching this channel, very entertaining and informative. Happy birthday 🎉
Wish we had the fishing opportunities up here in Canada that you guys have. Here the lake has to be deep enough to not winter kill. No such thing as pond fishing here.
New clutch time! Happy Birthday April.
Happy birthday April.....hope it's a good one!!!!!
transmission might need rebuilt but check linkage first to see if it's connected
Happy Bass day April!!!
Fill your blinker fluid tank. That should get the clutch up and working.
Shifter linkage is broken or not connected to the transmission
Bro I feel your pain on the catch and release! I see people throwing any size fish in a bucket down here in Ft. Lauderdale.. the canals are getting depleted.. the C-11 use to be loaded with fish when I was a teen I use to fish it all the time 2006ish now there’s nothing you don’t even see bait fish swimming
happy b day to April an hope you all have a good day an a even better one tomorrow
If it dont move in gear when you crank it nd the pedal feels normal shift linkage for sure
Happy Birthday April!!!🍺🍺 Great video. Always enjoy your content. 🤠👍🇨🇱
You might check and see if your clutch slave cylinder is not leaking and then check your linkage but other than that might just need bands and steels
Always a vibe!!! Shes basically pro by now
YakPak with the Trooper-stash tho.......haha Nice!
Nice fish guys! Love it when y’all drop a video 👍
I am gunna to have to agree, man. With everyone else. I rebuilt transmissions for a long time for while working st automotive dealships and mom n poo shops.
It is probably your clutch, either it is out of alightment, completely shredded or the linkage. Another think it would be is the gears have worn down so much you have a bunch of metal gunk in the transmissions. More likely not but possible.
I strongly recommend you get it looked at
Happy birthday to your Ole lady
Love the videos brother
Clutch linkage shift linkage or clutch plate
Happy birthday 🎂 April I love the shows with her on it
I love the super speed craw on the carolina and the free rig. SAUCE!!!!
Seems like you need the shift cables or shifter bushing
How come you are using left handed reel
Just purchased my first slx dc reel any rod suggestions ?
Field stache strong! 💪 those rods are so clean. He really did a great job on them
Either the clutch is toast, shifter linkage is disconnected or if the clutch pedal feels super light then it could be the clutch cable
Happy Birthday April!!!🎂🎈🥳🎊
Happy birthday April and a great video
Another great video! You guys make great content together.
Man I’m gonna go buy some lizards now… I’ve been rocking with some red and blue ribbon tail worms this summer. Landed a 4 pounder and had a few other 2 pounders today at a pond in a nearby town in Illinois. Always lookin to broaden my horizons though.
Happy birthday, April!!! 🎁🎁🎊🎉🎊🎉🎊🎉. Keep whooping some bass booty!
Check linkage and fluid levels if that shows to be good then it’s a good possibility you need a clutch and pressure plate but if it was good when parked then just gone I’d say linkage issue
Is it 4wd? Is your transfer case in nuetral?
Hell ya yak. We need a vid with you April Trey smalls norm ayo mason and Davy.
They just had one with inflatable Jon boats and outboards lol
It def wasn’t all them not the whole squad
Love to see y’all together
@yakpak and “Pop Daddy” merch 😂 also happy bday April
Did you check the tires, TJ? If they are fine, then I am at a loss.
Great Video, April still putting on a clinic
Swatting the bee gave you the pause you needed to catch that last fish 😂 I’m gonna need to practice that technique 😂
Happy Birthday April!!!
What happened to the big truck? I know you got it wet but I missed what happened after that…
Happy Birthday April!!🎉🎉🎉🎊🎊🎂🎂🎈🎈🎈
*You guys need to do a Cicada fishing challenge - real vs. lures .... Chasebaits makes a really good Cicada topwater lure.
Happy Birthday, April 🎉🎉🎉
Always enjoy your guys videos you can catch no fish and still make a good video😮
Happy birthday, do you guys use swivels at all?
We don’t
You can't beat the lizard. I catch h more bass on those than anything. Love the vids
Happy Birthday April!!
seems like your sift linkage is broke or not conected
Where has Norm been? Happy birthday April!
Could be synchros, linkage, or blown clutch
TJ check the linkage before you totally replace clutch could me away to save some coin and much simpler
Yakpak always cracks me up
I work on cars every day if your pedal feels like it should it’s not gone but I will say best thing to do is take it somewhere let them look at it because there’s a few things that could be wrong some easier fixes than others
HAPPY BIRTHDAY APRIL ! ! ! ! !
It's your transmission inmisson striped need a med confeterbale belt
Got clutch has been used to much so you need to get a new one