Thanks for using the EVE Audio SC305 studio monitors! To expand the low-end we recommend the TS108 over TS110 but if your studio is larger TS110 might also be an option :)
Thanks for this overview. I have a problem with the Sat-Filter. It lis on 0 to 80hz. If I want to cahnge it to a higher value nothing happens. If I dieal more than 2 steps, then the Sat Flat LED- lits. So I can only choose 80hz or flat , none of the other values. What to I do wrong?
Thanks a lot for your comment! Everything is correct. The satellites can be used flat (full range) or cut by 80Hz only. This is a commitment to the Dolby Specs :) Please let us know if you have more questions!
hey guys... I own a pair of sc207 which I love, but thinking of adding a sub... will a ts107 be sufficient? I have a small room with bass traps and acoustic treatment...
Hey Rafael, thanks for choosing EVE Audio SC207! We recommend the slightly larger subwoofer TS108 to combine with SC207. Let us know if you have more questions
Hi, thanks for your comment. The satellite stage of the TS110 is digitally controlled (but purely analog signal path). Please check the input level setting of your KRK’s. Likely they are not set to the same level and even less than 1dB difference can be audible. And also please check your room. It is possible that there is a different reflexion or diffraction condition between left and right side (walls, ceiling, etc.). Feel free to contact us again if there are more questions.
Hi Andrej, please have a look at the FAQ on our website. There is a list that shows which subwoofer is recommended for different setups: eve-audio.de/index.php?page=faq
Thanks for your comment! Both woofers are an option to be combined with SC207. With the size of the room we tend to prefer TS108 but if your room is acoustically well treated we recommend to have a look at TS110.
Hi Eve Audio. I couldn't find information how DSP and BurrBrown conversion exactly happening in TS-108. I looking into to keep my signal pure analog from my audio interface using this subwoofer. So I was thinking if LFE mode is working without DSP processing I could buy external analog crossover to achieve that. Or maybe there is some other way to do it, please help me to find out.
Hi, thanks a lot for your comment. The signal path for satellites is purely analog. Even the filter section is analog for the satellite path. The subwoofer path is filtered with a DSP, for this path the AD converter is being used. The LFE setting also uses the DSP section. The implemented filters in the DSP section are working like analog filters so there is no need to be concerned about the DSP processing. Please let us know if you have more questions.
Hi, thx for this video. Will your subs will pass music full range to the satellites when they are not turned on? I have Adam sub7 and i mostly don't turn it on and i can still mix with the satellites like no sub was connected (i'm not talking about turning the sub on then muting it). Thanks
Hi Rabeats, thanks for your question. The TS110 and TS112 will pass full range, TS107 and TS108 don't. But if you mute the Subs the satellites will always run full range.
Ist es möglich ein tutorial zu bekommen wie man seine Satelliten und den Sub (in meinem Fall SC205 und der Ts107) aufeinander abstimmt? Grüße aus Hamburg Danilo
Hallo Danilo, ist notiert! Bis zum Erscheinen des Videos kann es aber noch ein paar Wochen dauern, da wir einige Videos davor geplant haben. Wenn bis dahin konkrete Fragen aufkommen, beantworten wir die gerne auch schon vorher : )
@@EVEAudioMonitors moin und danke... In einem Video von Adam audio hier auf RUclips wird eine rosa rauschen Audiofile via DAW verwendet (ich nehme den tonegenerator in Cubase). Das Signal geht dann via Audiointerface in den sub und via sub an die Satelliten. (alles xlr) Müssen die Filter für die Satelliten am sub off sein, wenn ich die Messung mache? Laut AA soll man auf 80db spl kommen bei sub und Satelliten (ich Messe via kostenloser handyapp an der hörposition) bei den Satelliten (solo) klappt das, der sub (solo) schwankt stark... Ich bin mir unsicher ob das so richtig ist da ich auch nach dem einstellen das System am sub sehr weit aufdrehen muss damit ich den sub höre /spüre und wenn ich dann mal auf die Satelliten pure Wechsel via remote knallen die ordentlich im Bassbereich. (die internen Filter der Satelliten sind alle auf 0 bis auf den desk filter - 2)der sub ist mittig unter dem Desk in einer Linie mit den Satelliten ausgerichtet und die Phase ist 0. Eigentlich sollte alles passen aber irgendwie fühlt es sich nicht so gut an wie erwartet. Vielleicht muss ich einfach einen Profi kommen lassen der mir hilft. Kennt ihr jemanden in Hamburg? Grüße und ich freue mich auf eure Videos um noch besseren Klang aus euren Produkten zu bekommen.
Die Subwoofer und SC-Series-Modelle sind aufeinander abgestimmt. Wenn alle Monitore (und Subwoofer) auf 0dB eingestellt sind, ist zumindest der Pegel im schalltoten Raum gleich. Die Null-dB-Stellung sollte also als Startwert genommen werden. Unter 150Hz hat man sehr große Welligkeiten im Frequenzgang bedingt durch Raummoden. Zunächst würden wir raten, die Satelliten bei 80Hz zu filtern und dann mit dem Subwooferfilter zu „spielen“. Dabei unbedingt verschiedene Positionen des Subwoofers im Raum testen. Die Subwooferposition und die Hörposition sind dabei entscheidend. Das gilt besonders, wenn der Raum zu wenig im Bassbereich gedämpft ist. Versuche am besten eine Position zu finden, in der der Bassbereich möglichst homogen wiedergegeben wird. Der Höreindruck in einem Raum kann unglaublich unterschiedlich sein, da gilt es ein Optimum zu finden. Die Einstellmöglichkeiten helfen wenig, wenn an der Hörposition zu wenig Schalldruck wegen eines Raummodenminimums ankommt. Da nützt auch eine Pegelerhöhung nichts, da Null mal irgendwas stets Null bleibt. Also kurz zusammengefasst: Erstmal mit der Subwoofer-Positionierung spielen und anschließend bei Bedarf die Filter anpassen. Viele Grüße und viel Spaß mit den Lautsprechern!
@@EVEAudioMonitors danke, das hilft schonmal... Das heißt ich stelle das Rad an den Satelliten auf 0db und beim sublevel auch 0db. Eine Position finden wo der Bass gut klingt, dann via Filter etwas optimieren und über das systemlevel regulieren... Thanks
I use a pair of SC - 305 and now I want a sub woofer with this pair , please suggest me the best sub woofer size ! Asap. Eve is great ❤
Thanks for using the EVE Audio SC305 studio monitors! To expand the low-end we recommend the TS108 over TS110 but if your studio is larger TS110 might also be an option :)
Thanks for this overview. I have a problem with the Sat-Filter. It lis on 0 to 80hz. If I want to cahnge it to a higher value nothing happens. If I dieal more than 2 steps, then the Sat Flat LED- lits. So I can only choose 80hz or flat , none of the other values. What to I do wrong?
Thanks a lot for your comment! Everything is correct. The satellites can be used flat (full range) or cut by 80Hz only. This is a commitment to the Dolby Specs :) Please let us know if you have more questions!
Great
hey guys... I own a pair of sc207 which I love, but thinking of adding a sub... will a ts107 be sufficient? I have a small room with bass traps and acoustic treatment...
Hey Rafael, thanks for choosing EVE Audio SC207! We recommend the slightly larger subwoofer TS108 to combine with SC207. Let us know if you have more questions
I recently got the Ts 110 and paired it with Krk 7’s but after setting them up, the stereo image of the Monitors are panned a little bit to one side.
Hi, thanks for your comment. The satellite stage of the TS110 is digitally controlled (but purely analog signal path). Please check the input level setting of your KRK’s. Likely they are not set to the same level and even less than 1dB difference can be audible. And also please check your room. It is possible that there is a different reflexion or diffraction condition between left and right side (walls, ceiling, etc.). Feel free to contact us again if there are more questions.
Will you have Sc2050 version?
Could you please suggest which sub would match to which speakers ?
Hi Andrej, please have a look at the FAQ on our website. There is a list that shows which subwoofer is recommended for different setups: eve-audio.de/index.php?page=faq
Should I get the TS108 or TS110 with my SC207, 3.7 x 2.7m room
Thanks for your comment! Both woofers are an option to be combined with SC207. With the size of the room we tend to prefer TS108 but if your room is acoustically well treated we recommend to have a look at TS110.
Hi Eve Audio. I couldn't find information how DSP and BurrBrown conversion exactly happening in TS-108. I looking into to keep my signal pure analog from my audio interface using this subwoofer. So I was thinking if LFE mode is working without DSP processing I could buy external analog crossover to achieve that. Or maybe there is some other way to do it, please help me to find out.
Hi, thanks a lot for your comment. The signal path for satellites is purely analog. Even the filter section is analog for the satellite path. The subwoofer path is filtered with a DSP, for this path the AD converter is being used. The LFE setting also uses the DSP section. The implemented filters in the DSP section are working like analog filters so there is no need to be concerned about the DSP processing. Please let us know if you have more questions.
Hi, thx for this video. Will your subs will pass music full range to the satellites when they are not turned on? I have Adam sub7 and i mostly don't turn it on and i can still mix with the satellites like no sub was connected (i'm not talking about turning the sub on then muting it). Thanks
Hi Rabeats, thanks for your question. The TS110 and TS112 will pass full range, TS107 and TS108 don't. But if you mute the Subs the satellites will always run full range.
@@EVEAudioMonitors Thx for your reply, it will help me choose the right sub in the future.
Ist es möglich ein tutorial zu bekommen wie man seine Satelliten und den Sub (in meinem Fall SC205 und der Ts107) aufeinander abstimmt? Grüße aus Hamburg Danilo
Hallo Danilo, ist notiert! Bis zum Erscheinen des Videos kann es aber noch ein paar Wochen dauern, da wir einige Videos davor geplant haben. Wenn bis dahin konkrete Fragen aufkommen, beantworten wir die gerne auch schon vorher : )
@@EVEAudioMonitors moin und danke... In einem Video von Adam audio hier auf RUclips wird eine rosa rauschen Audiofile via DAW verwendet (ich nehme den tonegenerator in Cubase). Das Signal geht dann via Audiointerface in den sub und via sub an die Satelliten. (alles xlr) Müssen die Filter für die Satelliten am sub off sein, wenn ich die Messung mache? Laut AA soll man auf 80db spl kommen bei sub und Satelliten (ich Messe via kostenloser handyapp an der hörposition) bei den Satelliten (solo) klappt das, der sub (solo) schwankt stark... Ich bin mir unsicher ob das so richtig ist da ich auch nach dem einstellen das System am sub sehr weit aufdrehen muss damit ich den sub höre /spüre und wenn ich dann mal auf die Satelliten pure Wechsel via remote knallen die ordentlich im Bassbereich. (die internen Filter der Satelliten sind alle auf 0 bis auf den desk filter - 2)der sub ist mittig unter dem Desk in einer Linie mit den Satelliten ausgerichtet und die Phase ist 0. Eigentlich sollte alles passen aber irgendwie fühlt es sich nicht so gut an wie erwartet. Vielleicht muss ich einfach einen Profi kommen lassen der mir hilft. Kennt ihr jemanden in Hamburg? Grüße und ich freue mich auf eure Videos um noch besseren Klang aus euren Produkten zu bekommen.
Die Subwoofer und SC-Series-Modelle sind aufeinander abgestimmt. Wenn alle Monitore (und Subwoofer) auf 0dB eingestellt sind, ist zumindest der Pegel im schalltoten Raum gleich. Die Null-dB-Stellung sollte also als Startwert genommen werden. Unter 150Hz hat man sehr große Welligkeiten im Frequenzgang bedingt durch Raummoden. Zunächst würden wir raten, die Satelliten bei 80Hz zu filtern und dann mit dem Subwooferfilter zu „spielen“. Dabei unbedingt verschiedene Positionen des Subwoofers im Raum testen. Die Subwooferposition und die Hörposition sind dabei entscheidend. Das gilt besonders, wenn der Raum zu wenig im Bassbereich gedämpft ist. Versuche am besten eine Position zu finden, in der der Bassbereich möglichst homogen wiedergegeben wird. Der Höreindruck in einem Raum kann unglaublich unterschiedlich sein, da gilt es ein Optimum zu finden. Die Einstellmöglichkeiten helfen wenig, wenn an der Hörposition zu wenig Schalldruck wegen eines Raummodenminimums ankommt. Da nützt auch eine Pegelerhöhung nichts, da Null mal irgendwas stets Null bleibt.
Also kurz zusammengefasst: Erstmal mit der Subwoofer-Positionierung spielen und anschließend bei Bedarf die Filter anpassen.
Viele Grüße und viel Spaß mit den Lautsprechern!
@@EVEAudioMonitors danke, das hilft schonmal... Das heißt ich stelle das Rad an den Satelliten auf 0db und beim sublevel auch 0db. Eine Position finden wo der Bass gut klingt, dann via Filter etwas optimieren und über das systemlevel regulieren... Thanks
Ja genau, so sollte es was werden. Wenn weiterhin Probleme bestehen melde dich gerne nochmal!