It’s like cooking pasta, there is 100 ways how to do it, and 100 different tastes, but if 1 is good it doesn’t mean other are bad, about the engine ir depends how much you can spend, more you can spend, more realible it could be( not always) for instance my build cost around 7-8 k euros only engine and drivetrain, but there is what can be updated, in your option i would advice you to swap to the engine that has originaly your required horsepower( N54B30A, S55…) but of course if you are interested i could list my own setup
@@MatasDegutis I think swapping would be better because I like to hear engine sound instead of turbo. I will be checking your recommendations about engines. Thank you.
Not happy at all, didn’t drive long, piston reached the valve, but i believe it was because high emap. So lowered till 0.8boost and drive till broke rear axle from body, so now transfering whole set up to e92
@MatasD-gb2xh ah okay makes sense. So high emap caused the valve float. I'm actually busy building an m50b20 myself that I'm hoping to make 400whp with this helps a lot
@@bhagvedsingh2147yeah, but i had run on gtx30 and china exhaust manifold, now i have upgraded to gtx35 i believe it wont make so much emap with it, but anyway, need to measure it
Engine bone stock, only new oem headgasket it is not realible with 1.5bar but at least its fun. Here is exhaust manifold from china it may be the problem, because i think there was high emap
@@aksu2514 clutch is made by my friend idk how he made it but it works perfect, and the pedal is soft. Garbox E39 3d, rear diff from e36 2.5tds 2.56 ratio i believe, terrible choice, but it works with my horses and ita cheap
Good job ! The CR was modified or not ? With the GT35 the spoool come late ?
Thanks, no cr was not modified 11:1, its gtx35 ball bearing, 1 bar from 4200rpm
I had gtx30 spool was 300rpm earlier but 8200 rpm redline with double springs, was not a good idea, valve hit piston due to high emap
@@MatasDegutis thanks for the informations the car run E85 ? How Many hp ?
Have not dynoed yet, but runs almost eaqualy with m2 😁
Yes e85
We want more vids on this car
Is there any guid how to build m50b20 turbo ? I've the engıne but ı don't have the rest.
My car has 150hp v6, I need like 250-300 hp to drift easier
It’s like cooking pasta, there is 100 ways how to do it, and 100 different tastes, but if 1 is good it doesn’t mean other are bad, about the engine ir depends how much you can spend, more you can spend, more realible it could be( not always) for instance my build cost around 7-8 k euros only engine and drivetrain, but there is what can be updated, in your option i would advice you to swap to the engine that has originaly your required horsepower( N54B30A, S55…) but of course if you are interested i could list my own setup
@@MatasDegutis I think swapping would be better because I like to hear engine sound instead of turbo. I will be checking your recommendations about engines. Thank you.
@@MatasDegutis I am very interested about m50b20 turbo
Beautiful. What’s this reving to and is it a standard head?
Thanks. Rev limit 7800, yes the head was stock, after 300km like this, valve has reached the piston :))
@@MatasDegutis ok... i think ill cap mine at 7 grand xD
@@Rey-vm9it yeah stock redline would be smart :DD
@@MatasDegutis i mean u could put other valve springs in it, but yea, im too scared to blow mine xD
@@Rey-vm9it yeah, but im trying to push stock motor to the limits :D redline 8k wasnt the best option :D
hows the motor holding up these days, is it still happy @ 7800rpm on stock head?
Not happy at all, didn’t drive long, piston reached the valve, but i believe it was because high emap. So lowered till 0.8boost and drive till broke rear axle from body, so now transfering whole set up to e92
@lttabu high emap?
@@bhagvedsingh2147yeah, havent measured but valve had float
@MatasD-gb2xh ah okay makes sense. So high emap caused the valve float.
I'm actually busy building an m50b20 myself that I'm hoping to make 400whp with this helps a lot
@@bhagvedsingh2147yeah, but i had run on gtx30 and china exhaust manifold, now i have upgraded to gtx35 i believe it wont make so much emap with it, but anyway, need to measure it
Not even a decompression plate? 🥲
Not even 🫢
meant that do you have a decompression plate?
No, i dont have it
What done to motor and what parts?
Engine bone stock, only new oem headgasket it is not realible with 1.5bar but at least its fun. Here is exhaust manifold from china it may be the problem, because i think there was high emap
@@MatasDegutis what turbo, ecu and injectors?
@@aksu2514 garrett gtx30xx, but ill upgrade to gtx35 next year. Injectors bosch motorsport 880cc, and maxx ecu, the ecu is the best i have ever used.
@@MatasDegutis what clutch and gearbox and rear diff?
@@aksu2514 clutch is made by my friend idk how he made it but it works perfect, and the pedal is soft. Garbox E39 3d, rear diff from e36 2.5tds 2.56 ratio i believe, terrible choice, but it works with my horses and ita cheap
Which Diff ?
325tds 2.56 ratio 🥲
HP?
Not measured yet
Wow i have same engine 🫣🫣