You can skip first step that’s include to remove the mirror if you like, you can remove plastic cover anyway. Stressed out making this install did not do proper homework before. Not really necessary to remove the cable from the signal don’t know why I did that 🤣 Hope you like the video if not you can find more of this installs on other channels 👍
My left Side mirror turn signal just broke today. And I directly to your channel if you has any video about this. And you do have it!! You are a lifesaver! I’m so glad you upload DIY video about w212 !! You saved me a lot of money my friend!! 😎✌🏻
Thanks - was able to replace the indicator on a W246 B180 within 5 minutes - did not even need to remove the mirror. Just line up the mirror so it is parallel with the joint between the black main mirror assembly arm and the colour casing. You can then just pull the casing off upwards - leaving the mirror in place. Had to apply a bit of pressure using a trim removal tool on the front side of the assembly - i.e. below the clear indicator plastic - where the casing meets the black arm and the casing just lifted upward clean off.
Nice! It’s on my list but need to wait because the garmin unit I going to install it’s about 400€ the best I could find still not feel it’s 100% good and the china kit feels not that good 🤔 What brand are you using?
@@MB212 camera: es.aliexpress.com/item/32855044381.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw I chouse this camera because to instal just a hole diameter 6mm in trunk plastic cover. fuse: es.aliexpress.com/item/32846358727.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw Fakra cable: es.aliexpress.com/item/4000127521300.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw conectors: es.aliexpress.com/item/4000289058528.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw rele: filter: maxxcount Filter
I have tried 3 different versions of these, on 2 different Mercs - one from 2013, and the other from 2016. I also tried them with a bench rig, using an old school flasher can from the 90's, and all worked fine. On the Mercs, they all gave error messages about bulb failure. None of them lit all of the LED's in the strip (only about 80% of them at most). 2 of the 3 versions also caused the other bulbs to stop working - either the front, the rear, or both. I tried all sorts of series resistors, and other 'Canbus Fixes', but never got them working correctly. Anyone else have this problem and found a solution?
@@MB212 Hi. I mean that the primary function of these side turn signals is to indicate your intention to turn to the drivers who are driving on the next lane (on your left or right), right? For this purpose, they gently go back beyond the mirrors so you should see their blinking light from the rear of your car. How does it look like with those you have installed? It would be nice to demonstrate this, because they're not just decorations but have a certain safety function. Thanks.
I got you know mate did not even reflect about that when change them out. But looking to older it seems they are bit more visible from the side compare to those ones. If you like I can send you video on snapchat ( lilgnistan ) can not edit this video unfortunately.
You're right from the rear this turn signals are not so good as the original. I mean you can see it but not as well as the original. I was disappointed about this point when i did the installation.
Those are nice, however, you should have went with the Dynamic Syquqential LED lights that Have LED WHITE, OR BLUE LED, when your unlock or lock your car, I just ordered a set off of DMP Design, they look Sick, way better than just blinking lights lol!!!! Something to think about, it helps if you have Puddle lights though.....
@@tommydorsey2200 I suppose that's cool, I changed my door lights to the super bright LED Mercedes LOGO's, That way you can keep both!!! And they aren't some eBay garbage.!! Those ones suck!
Ok, I'm trying to pop off the plastic black part like you did so seemingly easily. It's taken the strength of 1000 SUNS and It is still stuck. I don't want to break anything but I'm damn near ready to HULK pull on the thing. Anybody else having same issues with the big plastic piece he pops off after the mirror????
You can skip first step that’s include to remove the mirror if you like, you can remove plastic cover anyway. Stressed out making this install did not do proper homework before. Not really necessary to remove the cable from the signal don’t know why I did that 🤣 Hope you like the video if not you can find more of this installs on other channels 👍
My left Side mirror turn signal just broke today. And I directly to your channel if you has any video about this. And you do have it!! You are a lifesaver!
I’m so glad you upload DIY video about w212 !!
You saved me a lot of money my friend!! 😎✌🏻
Nice always pleased when videos coming to help 🙏
Thanks - was able to replace the indicator on a W246 B180 within 5 minutes - did not even need to remove the mirror.
Just line up the mirror so it is parallel with the joint between the black main mirror assembly arm and the colour casing.
You can then just pull the casing off upwards - leaving the mirror in place.
Had to apply a bit of pressure using a trim removal tool on the front side of the assembly - i.e. below the clear indicator plastic - where the casing meets the black arm and the casing just lifted upward clean off.
thank you for taking the time to post this video, I appreciate it, hello from Miami, Florida, I own a 2014 E350
Wow, I'm surprised how good the new ones look 👌
Yehh and quality was really good 👊
Have the same one's with extra wire for blue turn signal just hooked it to puddle light. Nice install
I changed the puddle light housing to the mb emblem 🤩
I've put these on a month ago. The third wire was cut off, as yours. Works well.
Yah did order with out the third wire like to have as much oem install as possible. Your pleased with yours?
@@MB212 yes, fully
I sold my w212 e250 a couple of years ago and bought a Golf GTE. Biggest automotive mistake I have ever made
You need to trade it for a Benz again ; )
These are so clean . Had to get a set
I love them is really dope styling : )
Is it the same way to remove the glass the glass if you have blind spot assist
Yess same procedure but a additional cable to remove!
Ich brauche das für den W211 !! Wo gibt es das ??
Nice new look for your MB. Congratulations.
Yess sir really pleased with these good fitment and work perfect ✅
@@MB212 i have the same and It is a gread look change. This summer a have instaled in my car an aftermarket rear camera. Do you hace one?
Nice! It’s on my list but need to wait because the garmin unit I going to install it’s about 400€ the best I could find still not feel it’s 100% good and the china kit feels not that good 🤔 What brand are you using?
@@MB212 camera: es.aliexpress.com/item/32855044381.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw
I chouse this camera because to instal just a hole diameter 6mm in trunk plastic cover.
fuse:
es.aliexpress.com/item/32846358727.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw
Fakra cable:
es.aliexpress.com/item/4000127521300.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw
conectors:
es.aliexpress.com/item/4000289058528.html?spm=a2g0s.9042311.0.0.62bd63c0MIETKw
rele:
filter: maxxcount Filter
I see but you go with command system? Mine does not support rear camera :/
I have tried 3 different versions of these, on 2 different Mercs - one from 2013, and the other from 2016.
I also tried them with a bench rig, using an old school flasher can from the 90's, and all worked fine.
On the Mercs, they all gave error messages about bulb failure.
None of them lit all of the LED's in the strip (only about 80% of them at most).
2 of the 3 versions also caused the other bulbs to stop working - either the front, the rear, or both.
I tried all sorts of series resistors, and other 'Canbus Fixes', but never got them working correctly.
Anyone else have this problem and found a solution?
Ok, but how does it look like from the rear side, are they visible? This is the main purpose of these signals. Unfortunately you haven't shown this.
Sorry not really understand but from rear you not seeing these. Or you mean rear lights they not changed.
@@MB212 Hi. I mean that the primary function of these side turn signals is to indicate your intention to turn to the drivers who are driving on the next lane (on your left or right), right?
For this purpose, they gently go back beyond the mirrors so you should see their blinking light from the rear of your car.
How does it look like with those you have installed? It would be nice to demonstrate this, because they're not just decorations but have a certain safety function. Thanks.
I got you know mate did not even reflect about that when change them out. But looking to older it seems they are bit more visible from the side compare to those ones. If you like I can send you video on snapchat ( lilgnistan ) can not edit this video unfortunately.
You're right from the rear this turn signals are not so good as the original. I mean you can see it but not as well as the original. I was disappointed about this point when i did the installation.
Anyone know where you can get these for a CL203 CLC 2009
Thanx for the clear video !!!!!!!!👌🏻
Those are nice, however, you should have went with the Dynamic Syquqential LED lights that Have LED WHITE, OR BLUE LED, when your unlock or lock your car, I just ordered a set off of DMP Design, they look Sick, way better than just blinking lights lol!!!! Something to think about, it helps if you have Puddle lights though.....
Facts! I changed the puddle light housing to the mb logo
@@tommydorsey2200 I suppose that's cool, I changed my door lights to the super bright LED Mercedes LOGO's, That way you can keep both!!! And they aren't some eBay garbage.!! Those ones suck!
hii where is the link to aliexpress?
a.aliexpress.com/_BPUf8K
Mughe chaiye price
Wie immer ein super detaillirtes Video 👍weiter so 👍
Ok, I'm trying to pop off the plastic black part like you did so seemingly easily. It's taken the strength of 1000 SUNS and It is still stuck. I don't want to break anything but I'm damn near ready to HULK pull on the thing. Anybody else having same issues with the big plastic piece he pops off after the mirror????
Nice upgrade
How to order online
Aliexpress - eBay - Amazon search for dynamic blinker
I want them it's how much
These are so nice!!!
Still love to watch them when I locking the car ☺️ and they works flawlessly.
I have a ‘16 E400, would this fit ? (sedan)
Yess pretty sure it does!
Good Video, detailed very good 👍
Great video!
Where did you get the turn signals at?
Aliexpress
@@MB212 thanks, gotta get some for mine
Where i can buy it?
Amazon
Thanks again sir
Just fitted same ones without removing the mirror it's easy
Would have been a great opportunity to clean and polish the indicator / mirror casing. Pity.
nice
Super!!! 👍👍👍👍👍
Классно. Спасибо за обзор.
Super 🧐
super👌🏼
👍👍👍
9
Buy link for amazon amzn.to/34SodBc
👍👍👍