Glittering the vinyl before putting it on the piece is GENIUS! Thx for sharing. This technique will stop many tumbler makers from going bald from frustration. Wow!
Haha yes I was in that boat with horrible double sided tape for years until I figured this little trick out! You are VERY welcome and I hope many find it helpful too!!! 😁
This is truly the easiest way to do this!! I made a candy cane tumbler last year and honestly have no idea how i did it and have to do another one and this is the way i will do it! Thank you!!
Aww thank you. Thank you for subscribing, it means the world to me. You are very welcome. If you ever have an idea you would like me to try, just hit me up.
My daughter wants me to make 3 candy cane cups for my grandbabies this week so I tried one yesterday and it's now in the strip bucket lol.. So glad I found your tutorial it looks so much easier. Off I go to try another. Thank you so much!
So you did a total of THREE epoxy coats by the time you were finished??? I have a 20 oz straight tumbler so I wouldnt need tapered stripes, right??? Love your tutorial!!!
So my tumbler is straight as well, the taper still looks best because it tricks your eye. I do have them already tapered on my Etsy shop to purchase if you didn’t want to create them yourself. I do as many coats needed until it’s glass smooth. It kind of depends on how thin or thick your coats are on how many you will need. etsy.me/3Tw7mtK
Wow you blown my mind. I am brand new to tumblers but I want to do this. I have old cricut expressions the one that uses cartridges. I have to figure out how to use it and connect to internet. It been so long I forgot how to use the cricut. Sorry you did not need all that info. Your cup is stunning. Love it so much thanks hugs Sheryl 💙🎨💙
Aww you’re welcome! I’m SO glad you are getting into tumblers, they are addicting!!! I’m sorry I can’t help you on the cricut issues because I have silhouette but I did create a digital file on Etsy for the two strip that are already tapered! If you have any questions please ask! Thank you Katrina Devil Doll Custom Creations etsy.me/3nQTwVk
Hi. So most fast set epoxy has a higher chance of becoming yellowish over white especially if it is in the sun for longer periods of time. So I just always error on the side of caution.
@@devildollcustomcreations thank you for the quick response. I bought your file and will start it today (hopefully), if I can locate my non-sublimation cups in my current chaos situation living at my sister’s house
Hi. Yes slightly because when your wrapping them around the tumbler it still looks uneven. I created a listing on Etsy with the strips already tapered ready for you to cut out in vinyl if you didn’t want to create them yourself. Here is the link etsy.me/3fJOBoR
I watched your video again from last year. How do you taper at the bottom? I could see that you had something open in Silhouette, but couldn't see it well. If you taper at the bottom, the top goes along with it... Totally confused with all the stripes.
Hi so when you grab the bottom corner you can drag it in a little, don’t grab the side of the strip because then it will make the whole strip thinner. I did create a listing on Etsy if you still are having a hard time that has two sizes of strips with the bottoms already tapered. I will link it here. Thank you Katrina Devil Doll Custom Creations etsy.me/3FPv9Si
Yes there is but the one brand I tried to do this with became dull compared to adding my glitter to vinyl myself. Maybe I just had bad glitter adhesive vinyl 🤷♀️
Yes you could but you still need to seal it especially if it’s cricut brand because they bleed under epoxy BAD. I used a sparkly white vinyl (not glitter) on my Christmas pen on my advanced pen tutorial and it turned out amazing!
You are very welcome! And I created a cut file for these on my Etsy page DDollCustomCreations if you didn’t want to create the lines yourself! Good luck and I’m here if you need any help! 💕
I’m sorry your lost. I cut the lines out on vinyl and glitter the vinyl and seal the glitter then add the strips onto a glittered tumbler. Does that help at all?
Genius! I love how you glitter before adding the stripes.
Thank you 💕
Love it.... best idea I have ever seen...
Awww I’m glad you like the candy cane hack! 💕
Yay so pretty
Awww thank you SO much!!’
OMG!!! Glittering vinyl!!! How have i never thought of this?!! Great idea!!!
Haha thank you! Yes a game changer for real!!!
ABSOLUTELY LOVE IT!@!
Aww thank you
Glittering the vinyl before putting it on the piece is GENIUS! Thx for sharing. This technique will stop many tumbler makers from going bald from frustration. Wow!
Haha yes I was in that boat with horrible double sided tape for years until I figured this little trick out! You are VERY welcome and I hope many find it helpful too!!! 😁
So the total number of epoxy coat is 3??? Or 4?
Njhh
It really all depends on how heavy your coats are. I just keep adding coats until it is smooth as glass
Adding the glitter to the vinyl then putting it on the cup is genius!!! 👏🏼👏🏼👏🏼
Yayyy I’m so glad your finding my little trick helpful 😁
This is so beautiful. It absolutely is the perfect candy cane
Awww thank you so much. I would love to see any of your creations you do with this technique! 💕
You explain all of this so well!
Aww that’s really nice to hear I’m glad you liked the tutorial 💕
This is truly the easiest way to do this!! I made a candy cane tumbler last year and honestly have no idea how i did it and have to do another one and this is the way i will do it! Thank you!!
You are very welcome! 💕
Great tutorial! Thank You!!!
You are very welcome! If you ever need any help just reach out, I’m here! 😀
So beautiful! New subbie
Thank you. I would love to see your creations! 💕
This is a beautiful cup! I'm a new subscriber.... Thank you :-)
Aww thank you. Thank you for subscribing, it means the world to me. You are very welcome. If you ever have an idea you would like me to try, just hit me up.
Look at you, you genius cheater, you! 😍😍😍😍
Haha And you are welcome 😁
I love this!!!!! Thanks for sharing❤
You are most welcome. Thanks for watching
Thanks for sharing!
You are most welcome! 😁
Thanks for this! Your tumbler looks amazing!
You're so welcome!
My daughter wants me to make 3 candy cane cups for my grandbabies this week so I tried one yesterday and it's now in the strip bucket lol.. So glad I found your tutorial it looks so much easier. Off I go to try another. Thank you so much!
Oh no I really hope my technique helps you. If you run into any issues hit me up! Good luck and I would love to see the finished products💕
So you did a total of THREE epoxy coats by the time you were finished??? I have a 20 oz straight tumbler so I wouldnt need tapered stripes, right??? Love your tutorial!!!
So my tumbler is straight as well, the taper still looks best because it tricks your eye. I do have them already tapered on my Etsy shop to purchase if you didn’t want to create them yourself. I do as many coats needed until it’s glass smooth. It kind of depends on how thin or thick your coats are on how many you will need.
etsy.me/3Tw7mtK
Wow you blown my mind. I am brand new to tumblers but I want to do this. I have old cricut expressions the one that uses cartridges. I have to figure out how to use it and connect to internet. It been so long I forgot how to use the cricut. Sorry you did not need all that info. Your cup is stunning. Love it so much thanks hugs Sheryl 💙🎨💙
Aww you’re welcome! I’m SO glad you are getting into tumblers, they are addicting!!! I’m sorry I can’t help you on the cricut issues because I have silhouette but I did create a digital file on Etsy for the two strip that are already tapered! If you have any questions please ask!
Thank you
Katrina
Devil Doll Custom Creations
etsy.me/3nQTwVk
Wow! Great tutorial! Tfs
Thank you for watching!
beautiful and love it
Thank you so much. I loved creating it!
What is your reason for not fast epoxying over white?
Hi. So most fast set epoxy has a higher chance of becoming yellowish over white especially if it is in the sun for longer periods of time. So I just always error on the side of caution.
@@devildollcustomcreations thank you for the quick response. I bought your file and will start it today (hopefully), if I can locate my non-sublimation cups in my current chaos situation living at my sister’s house
If the tumbler is straight do you still need to cut the vinyl at a taper?
Hi. Yes slightly because when your wrapping them around the tumbler it still looks uneven. I created a listing on Etsy with the strips already tapered ready for you to cut out in vinyl if you didn’t want to create them yourself. Here is the link
etsy.me/3fJOBoR
I watched your video again from last year. How do you taper at the bottom? I could see that you had something open in Silhouette, but couldn't see it well. If you taper at the bottom, the top goes along with it... Totally confused with all the stripes.
Hi so when you grab the bottom corner you can drag it in a little, don’t grab the side of the strip because then it will make the whole strip thinner. I did create a listing on Etsy if you still are having a hard time that has two sizes of strips with the bottoms already tapered. I will link it here.
Thank you
Katrina
Devil Doll Custom Creations
etsy.me/3FPv9Si
@@devildollcustomcreations I just saw on your screen that you have the points window open... You didn't say that. Thank you
How did you taper the bottom of the stripe? I have a silhouette cameo 3
I actually made a listing on Etsy that comes with 2 sizes of strips that are already tapered if you didn’t want to taper them yourself
etsy.me/3XsC2PU
Nice tutorial....but there is glitter adhesive vinyl that would have made the white glitter stripes soooo less taxing
Yes there is but the one brand I tried to do this with became dull compared to adding my glitter to vinyl myself. Maybe I just had bad glitter adhesive vinyl 🤷♀️
Could you use glitter vinyl? Or does it lose shine under epoxy?
Yes you could but you still need to seal it especially if it’s cricut brand because they bleed under epoxy BAD. I used a sparkly white vinyl (not glitter) on my Christmas pen on my advanced pen tutorial and it turned out amazing!
@@devildollcustomcreations I've never used glitter vinyl with epoxy. Thanks for the tip. Definitely will spray first. Can't wait to try this design!
You are very welcome! And I created a cut file for these on my Etsy page DDollCustomCreations if you didn’t want to create the lines yourself! Good luck and I’m here if you need any help! 💕
Love this video and the cups are amazing! I do have a question. How do you know how much to taper at the bottom of the white stripes?
Hi. Thank you so much. I actually created an Etsy listing of two different widths of strips
etsy.me/3ldXRl1
U did not explained how u did it... for the new users.. I'm so lost. 😢
I’m sorry your lost. I cut the lines out on vinyl and glitter the vinyl and seal the glitter then add the strips onto a glittered tumbler. Does that help at all?