GoPed and Small Engine Motor Carb Tuning Adjusting
HTML-код
- Опубликовано: 8 фев 2025
- Here’s a simple guide that works great for me on tuning a carb. Settings are different for each carb, but the way you tune it should all be the same. Once running and tuning for peak power/performance your turns on the needles should be smaller. This carb is a WT-990 commonly used on GoPed scooters.
Finally someone has explained it were u can actually understand thank you.
Thank you for saving me from how much stress I was able to fix it
If you close the jets then close the choke almost completely. Then make quarter turns and pull it then repeat you can get a great mixture and really dial it in
Thanks Chris!
solid video--- appreciate it
Glad it worked out 💪🏼
Helped me a lot thank you 🙏 ❤
Good idea with white out 🤙🏻
What’s a great carb out there ? New to go ped . Nice video 👌🏽
Depends on engine size, porting, pipe etc
Nice bro
Thank you
Does the work on zenoah g320rc engine
I have never even seen one of these on a 15mm carb before
Thank you!!
Glad to hear it worked for you
My go ped scooter don’t want to start no more new plug and full lines and gas oil is good it wants to start but it won’t please help ☹️☹️
same problem
Did u ever fix it
@@kingplayz9532 no going to have to take it to the scooter shop when I have money .
Try getting a new carb
@orange boy 714
I hope this fixes my carb on my losi dbxl 2.0 gas i was stupid when i bought my rc to out of the box messing with the high and low needles after watching this video hopefully i can get my carb right the damn rc shops charge 90.00 per hour highway robbery
Are these the base settings for most g23lh? What about a s g230rc?
It’s a good starting point for any size engine.
@Christopher sanchez what about 1107 carbs ?
1 and haf tuns on lots carbs
I have a w668 that keeps over fueling on me. Any suggestions? It's a new engine and new carb if that helps.
Double check tune. Or incorrect pop off for engine
Hey will this fit on the G230 rc goped?
Miguel Gonzalez yes
i have same use 4x4 best setting for that
Do you know if the 813 Walbro carb is good or not in new to gopeds
813 Is very tricky to tune due to the internal accelerator pump. 990 is same specs but without pump. Try that better
Does this work for zenoah 290
Yes sir
@@CFLGopedder i have the same motor and need to adjust the idle, can you explain how to do that?
@@benjamincosio8986 yea I need to know too
@@MD-tr8fn I figured it out. You just turn it super far left start the motor and it will idle super high. Then you start turning towards the right as it’s idling until you feel it is idling at the right rpm
@@CFLGopedder how about cy 290rc
What carb is this
Kawi 550 Life 990
Kawi 550 Life wt990 sir
Was just about to throw away my goped lol
4x4 best