I have 5 M12 Surges as a professional contractor/electrician it’s by FARRRRRRRR the BEST impact drill I’ve ever come across, if you’re thinking about getting one, stop thinking… GET ITTT!!! You won’t regret it!!! 🔥
I got the m12 installation tool with 2 2.0 ah batteries for 179.00 at the Depot back in November as a birthday present to myself. That’s how you get what you want on your birthday purchase what you want. 😆
I just installed 35 cabinets with the installer . it is probably the best tool I have bought in the last 10 years. the offset had is fabulous for getting into the corners of drawers and cabinets , when doing face frames swapping between drill and driver and right angle is a breeze. this tool is only half price of the festool model and I think it's just as good ,it's a much better value. I thought it was Goofy until I had 35 cabinets to install but this tool and a couple sets of Bessie face frame clamps made the job efficient and fun. If you install cabinets, this tool will make your job easier and more enjoyable 👍👀
In our experience, the decibels jump up for a brief moment while sinking the fastener flush with hydraulic impacts. Maybe this is the reason he didn’t drive the fastener home, but we won’t know until we test it personally with a decibel meter! I agree testing should have been equal!
All of Milwaukee’s demonstrations utilizing other tool brands are hinky. When they showed when Packout first came out they didn’t compare a comparably priced product the DS 150 they used the DS 130 that’s half the price of their pack out to test durability, Just like this year when they were showing off their “milk crate” they show the failure point of the DeWalt unit and then did a like comparison to Packout when you know that the unit is going to be 1/3 more to double the price so it should be able to handle 1/3 more weight or double the weight for double the price... Watch the tests that Milwaukee runs and it’s strange to find one that you can’t call shenanigans on.😉
@88Shortfuse They’re made out of structural foam to reduce weight. In over two years of use the only thing that I have a broken is the handle on a DS 150 from trying to pick up my boxes by the handle when interlocked, it’s still on it doesn’t lock in the out position.
lol I noticed that too. Granted the other one hit like 92 but theirs still hit like 86-87 so it's still over and would technically require hearing protection.
Dude I call you" SHOW TIME! I have a short attention span for watching so many info videos . Then I come across some of your new content and it's show time! Awesome attention to real world interaction, like when you hit the streets. I'm waiting to see you on tv soon. 👍👍👍
The intro should be "Welcome to Milwaukee central!" lol. Love the vids, getting ready here in bout six months to go into HVAC at this school 113 miles from me and this channel is helping a lot with what I need once I finish my trade school classes once I go.
Haha sort of surprised about the decibel oops 🧐 but... SERIOUSLY 🏎💨💨💨 I absolutely ❤❤❤ the entire Milwaukee M18 Fuel platform!!! Best cordless tools on the planet 🌎 I have just yet begun to start investing in the M12 Fuel though so EXCITED to collect and use them all...This new adaptable driver is going to be SWEET 😁 Thank you Milwaukee for all the time money and effort you put into all of your tools advertising in people that represent you 🙏 I think VCG does great reviews and content all the way around as well 👌 Lol I only read a few of the comments but critics will be critics the tools speak for themselves I can attest for that for a fact 💯 I have worked in some EXTREMLY hardcore environments & put these tools to the test for many years 💪 I have plenty of proof been documenting these incredible tools with my work for a long time going to put a portfolio together soon unbelievable how many different applications in industries these tools are superior in 🤤
Great video Vince. Looks like the Milwaukee Design Engineers are really listening to the tradesmen by building the Installation Drill/Driver, looks like the universal power tool for 80% of my needs. Fifty 7/8" holes with an auger bit with a 12 volt tool, ... "Red & Black, Jack" 👍
Not much of a use for me...but I love their tools and curious about the m12 1/2in. Impact. They are thinking fast and accurate. Waiting for the Microwave to hit the shelves.
Greg Banach "Looks like the Milwaukee Design Engineers are really listening to the tradesmen by copying the Festool CXS" and other tools like Bosch 3" angle grinder. Good for us. :)
or that the NPS was just happening and they were invited to cover it. It could also be that milwaukee currently has newer tools, so more power. The dewalt drill and impact are a bit older and they featured many other brands.
James Moore TTI owns Milwaukee rigid ryobi ...someone else too...and I think maybe makes harbor freight items sometimes. So really I just want to see TTI vs makita vs Bosch vs metabo vs ingersol vs porter. But I tire of the amount of Milwaukee vs Milwaukee or Milwaukee vs it’s sister brand stuff on RUclips so I get it. Milwaukee is by far the most marketed, but that’s TTI in general
M12 line is great! I use them excuse work as a commercial hvac tech. Only thing the m12 line is missing is a radio that charges batteries! Any word on if and when Milwaukee will put one out there?
Question - is the chuck for the hydrolic impact enclosed like the m18 impact? or still open like the regular m12 impact? it collects a lot of dust dirt and silica. It has become a hassle for me to clean weekly or bi weekly... I love it.. but the maintance is getting to me..
I like how he shows use case of each attachment got installation drill and adds “for the first time” while similar functionality tool, from Bosch and Festool have been available for years :)
First saw Panasonic zero clearance drill something like 15 years ago. Milwaukee doing catch up on the multi head drills. Haven't had an occasion requiring those attachinements, getting by using close quarter drill, flex dit drive or micro ratchet driver. I do have the Milwaukee 3/8" ratchet drive, mostly working on my cars.
Perhaps but mainly its more for comfort and convenience....sort of like for the same type of people that looked at the paint i was using to paint a office yesterday wanting to know if there were any hazards to smelling the paint all day when its water based paint...in other words pussies
It kinda looks like a gas pump handle. lol Still really cool, I have been a Dewalt fan for a bit now but I am slowly starting to like some Milwaukee stuff now.
I would definitely buy this tool.... makita has a coffee maker I’m waiting for Milwaukee to come out with their version lol. I’m a Milwaukee man but that portable coffee make is very appealing to me.
I absolutely am interested in purchasing this item. It should be noted that this item is very close to the 10.5V Festool driver that has been out for years. This Milwaukee is almost a copy of Festool, less the Festool price.
First think I thought of what I saw it was the CSX. The big plus for me though, is the fact the milwaukee looks to have narrower profile which is nice. And the offset attachment is pretty cool.
@@Finnik66 12v in US, 10,8v in other countries. Check Makita or Bosch battery markings, for example. It's not exact copy of Festool CXS, but it's a copy. Like Packout built with t-locs in mind. :)
Milwaukee already have 2 products almost identical to the installation driver. A 4 in 1 drill driver which is M12BDDXKIT and a 6 in 1 percussion drill which is M12FPDXKIT. Other than 1 attachment and the front addition to the grip I can't say there would be too much between them
the new packout is amazing, just like the radio for the whole set, and these containers ... M12 ... I'm starting to think seriously about both the packout and the M12 screwdriver. I will stay with the M18 because the power ... inceVince, as usual, interesting filmik.pelen respect and keep on going
Nobody really understands the benefit of the surge. Being quieter is nice, but it impacts very consistently at every speed. It doesn't bind up like a traditional impact. It's smooth and a lot more precise than a standard impact.
Hi Guys!!!! That M12 multi-adapter tool is pretty awesome! Hey Vince, did you get a chance to ask the Milwaukee guys any of the questions that we submitted to you?
@@VCGConstruction Thanks Vince! And hey, Vince/Nick, great videos from the Milwaukee show! Camera angles were niceeeee, and focus was solid. The intros/narration were spot on. :-)
Iam completely set up with milwakee, ive dumped about 8grand into these guys. I dont care about being stealthy when on job. I just wasnt to stop taking my tools in for repair and warranty faults. Youve done a great job just upgrade the electronics and make it more robust.
I have 5 M12 Surges as a professional contractor/electrician it’s by FARRRRRRRR the BEST impact drill I’ve ever come across, if you’re thinking about getting one, stop thinking… GET ITTT!!! You won’t regret it!!! 🔥
I got the m12 installation tool with 2 2.0 ah batteries for 179.00 at the Depot back in November as a birthday present to myself. That’s how you get what you want on your birthday purchase what you want. 😆
I just installed 35 cabinets with the installer . it is probably the best tool I have bought in the last 10 years.
the offset had is fabulous for getting into the corners of drawers and cabinets , when doing face frames swapping between drill and driver and right angle is a breeze.
this tool is only half price of the festool model and I think it's just as good ,it's a much better value.
I thought it was Goofy until I had 35 cabinets to install but this tool and a couple sets of Bessie face frame clamps made the job efficient and fun.
If you install cabinets, this tool will make your job easier and more enjoyable 👍👀
Didn't finish screwing down the screw and still over 85db... lol
In our experience, the decibels jump up for a brief moment while sinking the fastener flush with hydraulic impacts. Maybe this is the reason he didn’t drive the fastener home, but we won’t know until we test it personally with a decibel meter! I agree testing should have been equal!
Funny business! He didn't finish driving the screw.
All of Milwaukee’s demonstrations utilizing other tool brands are hinky. When they showed when Packout first came out they didn’t compare a comparably priced product the DS 150 they used the DS 130 that’s half the price of their pack out to test durability, Just like this year when they were showing off their “milk crate” they show the failure point of the DeWalt unit and then did a like comparison to Packout when you know that the unit is going to be 1/3 more to double the price so it should be able to handle 1/3 more weight or double the weight for double the price...
Watch the tests that Milwaukee runs and it’s strange to find one that you can’t call shenanigans on.😉
@@thetruth5210 but yet DeWalt boxes still have cheap feeling plastic.
@88Shortfuse
They’re made out of structural foam to reduce weight. In over two years of use the only thing that I have a broken is the handle on a DS 150 from trying to pick up my boxes by the handle when interlocked, it’s still on it doesn’t lock in the out position.
Love how he clears the graph so quickly after their tools breaks the 85 dB threshold.
lol I noticed that too. Granted the other one hit like 92 but theirs still hit like 86-87 so it's still over and would technically require hearing protection.
Also didn’t completely drive the screw home where I’d guess tool is working hardest and making the most noise 😂
l
ima just use my loud ass m18 thank you very much
Thought I was the only one who caught that. 😄😄😄
I love that tool
The M12 line have been Milwaukees best offering for years now. Excellent quality, extremely durable.
No words!!! Thanks V.C.G. construction.
I started with m18 tools slowly switched to all m12 because how much I loved them !
M12 line just keeps getting better. Love it! Thanks Vince and Nick for the awesome coverage.
Nice work, no 99% claims this time. Much appreciated
Nothing like Milwaukee power tools. In my opinion the best. Thank you for bringing us this videos, great quality btw👍
Dude I call you" SHOW TIME! I have a short attention span for watching so many info videos . Then I come across some of your new content and it's show time! Awesome attention to real world interaction, like when you hit the streets. I'm waiting to see you on tv soon. 👍👍👍
That installation drill is the bomb!
I am a fan of Milwaukee and I always bought their wonderful products ... Thank you for this great video ... Watch from Iraq
Milwaukee is always puttin out insane products. Just destroys the competition.
The intro should be "Welcome to Milwaukee central!" lol. Love the vids, getting ready here in bout six months to go into HVAC at this school 113 miles from me and this channel is helping a lot with what I need once I finish my trade school classes once I go.
Jacob Reichert hvac requires schooling?
@@dallas5374 not necessarily if have a good on the job trainer that knows everything about hvac
Anyone else think it's suspicious he didn't bury that screw with the Milwaukee during the dB comparison?
That's called creative marketing. Office people don't realize that a working guy will notice all these little tactics.
Also, the dB range was still above 85.
@@TheSoloAsylum good thing i dont buy wilwaukee shit for it loudness
Wow! Milwaukee Rep actually gets to the point. WITHOUT the screaming.
“Twice as loud to the human ear” = VCG video personality
Haha sort of surprised about the decibel oops 🧐 but...
SERIOUSLY 🏎💨💨💨 I absolutely ❤❤❤ the entire Milwaukee M18 Fuel platform!!! Best cordless tools on the planet 🌎 I have just yet begun to start investing in the M12 Fuel though so EXCITED to collect and use them all...This new adaptable driver is going to be SWEET 😁
Thank you Milwaukee for all the time money and effort you put into all of your tools advertising in people that represent you 🙏 I think VCG does great reviews and content all the way around as well 👌
Lol I only read a few of the comments but critics will be critics the tools speak for themselves I can attest for that for a fact 💯 I have worked in some EXTREMLY hardcore environments & put these tools to the test for many years 💪 I have plenty of proof been documenting these incredible tools with my work for a long time going to put a portfolio together soon unbelievable how many different applications in industries these tools are superior in 🤤
Great video Vince
Great video Vince. Looks like the Milwaukee Design Engineers are really listening to the tradesmen by building the Installation Drill/Driver, looks like the universal power tool for 80% of my needs. Fifty 7/8" holes with an auger bit with a 12 volt tool, ... "Red & Black, Jack" 👍
Not much of a use for me...but I love their tools and curious about the m12 1/2in. Impact. They are thinking fast and accurate. Waiting for the Microwave to hit the shelves.
@@ooxoo3980 They need to have an M12 rotating pizza oven for fishing trips the pies don't nuke too well.
Greg Banach "Looks like the Milwaukee Design Engineers are really listening to the tradesmen by copying the Festool CXS" and other tools like Bosch 3" angle grinder.
Good for us. :)
Great video again
These videos are great thanks for sharing love seeing all the new tools my husband’s wish list will be a long one!
Fantastic tools
This guy is a great salesman
This channel is just one big milwaukee ad. I love my Milwaukee tools and I'm looking to get a milwaukee toolbox.
or that the NPS was just happening and they were invited to cover it. It could also be that milwaukee currently has newer tools, so more power. The dewalt drill and impact are a bit older and they featured many other brands.
James Moore TTI owns Milwaukee rigid ryobi ...someone else too...and I think maybe makes harbor freight items sometimes. So really I just want to see TTI vs makita vs Bosch vs metabo vs ingersol vs porter. But I tire of the amount of Milwaukee vs Milwaukee or Milwaukee vs it’s sister brand stuff on RUclips so I get it. Milwaukee is by far the most marketed, but that’s TTI in general
emilio kowalski lol!!!
M12 line is great! I use them excuse work as a commercial hvac tech. Only thing the m12 line is missing is a radio that charges batteries! Any word on if and when Milwaukee will put one out there?
Yes I want to preorder both as soon as possible.
Definitely trying the palm nailer and service tool
Installation tool is essentially the 13v Bosch Flexiclick, I have an M12 drill as well and the Bosch’s batteries last waaayyy longer on runtime
@Jacob Thompson
It is a direct copy of the Festool CXS, same unique form factor.
Love my Flexiclick, use it wherever my PS22 can’t do the trick.
the finish drill driver is what im most excited for this year. Its perfect for my shop.
Had the M12 set and loved it. Some stole it from me. I intend to run 8-10 self tappers into them when I find the person responsible.
I hate thieves
I recommend M18 tools ;)
Nice video
Question - is the chuck for the hydrolic impact enclosed like the m18 impact? or still open like the regular m12 impact? it collects a lot of dust dirt and silica. It has become a hassle for me to clean weekly or bi weekly... I love it.. but the maintance is getting to me..
I like how he shows use case of each attachment got installation drill and adds “for the first time” while similar functionality tool, from Bosch and Festool have been available for years :)
That device with 4 heads is awesome it’s on my wish list
I love it like i love this channel
First saw Panasonic zero clearance drill something like 15 years ago. Milwaukee doing catch up on the multi head drills. Haven't had an occasion requiring those attachinements, getting by using close quarter drill, flex dit drive or micro ratchet driver. I do have the Milwaukee 3/8" ratchet drive, mostly working on my cars.
thank for the videos
Any chance we can order them from America to Australia? The prices are too high here
You can drill a 7/8 hole between the studs just as easy and compact with a impact driver.
Perhaps but mainly its more for comfort and convenience....sort of like for the same type of people that looked at the paint i was using to paint a office yesterday wanting to know if there were any hazards to smelling the paint all day when its water based paint...in other words pussies
Can the installation offset head be place on either side and top?
awesome tools
Great video. Thanx for taking time to process video too.
I got mine its so badass bro especially for the job
Great looking tool! 👍🏻
I like his Milwaukee shirt with the underarmour logo
😂 he didn’t go all the way in to keep the noise down 😅 3:24
It kinda looks like a gas pump handle. lol Still really cool, I have been a Dewalt fan for a bit now but I am slowly starting to like some Milwaukee stuff now.
Is the installation tool going to be available in Australia?
love the right angle thing
Love it !!!
Take my money i want this now can't wait
Festool had those attachments ages ago
Yeah but at 3x the price and less performance
the system was offered by Festool 10 years ago
arthur wang 😂 absolutly
I have it and it’s shite so I switched to Milwaukee
When are they going to be available?
I believe November
Idk about you guys but I like the noise lol
that second Drill is an interesting bit of kit
using the compressability of oil to dampen the noise is freakin brilliant
I would definitely buy this tool.... makita has a coffee maker I’m waiting for Milwaukee to come out with their version lol. I’m a Milwaukee man but that portable coffee make is very appealing to me.
Just got a new hole Hawg and super hole Hawg with m18 12 amp hour batteries. Incredible.
Great video hope to see you guys at one of these tools shows really soon! Thanks again
Still above 85 DB. Look how quick he deleted the screen. Lol
Tim Colonial Flooring no kidding, didn’t even finish screwing it in
someone didn't test it ahead of time. 🤣
It is 86db on an unreleased product. Go boil an egg.
They openly advertise 76 decibels too. The reprobates.
Milwaukee is paying this dude
Great video... I have the dewalt platform but tempted to buy the m12 installation driver .. looks nice ....
That's good money
Oh man! Thanks VCG!! Thanks Milwaukee!!!
I love milwaukee tools i cant wait to purchase these two new m12 tool kits
I absolutely am interested in purchasing this item. It should be noted that this item is very close to the 10.5V Festool driver that has been out for years. This Milwaukee is almost a copy of Festool, less the Festool price.
The festool does come with the systainer box which is a plus!
A Toyota may look a lot like a Honda. Doesn’t really mean one is copying the other.
@@shakeNbakestudios maybe, but this is Festool CXS for sure. :)
First think I thought of what I saw it was the CSX. The big plus for me though, is the fact the milwaukee looks to have narrower profile which is nice. And the offset attachment is pretty cool.
Bosh already got something similar to the installation driver/drill for a year at least... But cool to see it in red 😉
Looks also a lot like the Festool C18
Awesome, powerful tools....for the first 2 years, before they totally shit the bed.
They have a five year warranty
Despite the impact clunch, looks A LOT like a festool 12v screwdriver
Festool CXS has 10.8 v (not 12v) BUT it's not a brushless tool and no line of product under that battery (only 18 v has a decent tools line)
@@Finnik66 12v in US, 10,8v in other countries. Check Makita or Bosch battery markings, for example.
It's not exact copy of Festool CXS, but it's a copy.
Like Packout built with t-locs in mind. :)
Why did they make a cordless framing nailer that only shoots up to 2-1/2" nails?
They didn’t
@@VCGConstruction Everything I have read says 2-1/2" for the new framing nailer.
NEW Milwaukee Tools M18 SAWS That ONLY 1% OF PEOPLE KNOW ABOUT! ruclips.net/video/yKmtDXSde8Q/видео.html
@@VCGConstruction Well just finally found one vid that they say it shoots up to 3-1/2" Ok.
Thanks for giving me a Birthday look at some new content. 🙏🏼
Happy Birthday Edgar!
The installation driver looks suspiciously like a Festool
Yep
How about creating a cordless winch?
Don't think the M18 batteries have enough capacity for pulling a car out of a ditch.
after the M12 surge, I don't even care. Love my M18 version
What do you like most? What did you have before?
@@Fee.1 Well the M12 version hasnt been released yet so i will have to wait and see which one I like more.
a red fescool cxs for 179?! Hell yeah, im in!!!
I want the installation drill driver now!!!!
Yo, how many milwaukee milk crates was Vince standing on to reach the pull up bar? 😅😅😅 Thanks Vince and Campbell!
maybe 3
Milwaukee already have 2 products almost identical to the installation driver. A 4 in 1 drill driver which is M12BDDXKIT and a 6 in 1 percussion drill which is M12FPDXKIT. Other than 1 attachment and the front addition to the grip I can't say there would be too much between them
Looks like neither is available in North America although both seem to be a bit less compact than this new tool.
Why did he not finish the screw with the Surge and why was he so quick to remove the result off the screen.
Yeah, WTF was up with that?!?
The m18 surge is a dog when it comes to screwing in wood. Apparently so is the m12 surge. If all I did was drill sheet metal it would be my drill.
Because it was over 85db
Been using festool for years
the new packout is amazing, just like the radio for the whole set, and these containers ... M12 ... I'm starting to think seriously about both the packout and the M12 screwdriver. I will stay with the M18 because the power ... inceVince, as usual, interesting filmik.pelen respect and keep on going
👍🏻
I like it👍🌹
Milwaukee should make something similar to Skils 4V screwdriver with built-in live cirkuit tester, but give it more torque.
That would be sweet for sure dude
Should also have a drywall attachment for screwing screws.
Can you imagine the training class these guys though to get them this pumped!
Great video as usual, the m12 installation drill has been in the uk for awhile now
Wow I didn’t realize that, thanks RJ & JR !
How do you like it? Is that front brace removable? I can see it being in the way on that one screw i gotta get to!
The Milwaukee version, or the Bosch one? Bosch has a similar one, but it just looks like a regular impact driver that swaps heads...
Nobody really understands the benefit of the surge. Being quieter is nice, but it impacts very consistently at every speed. It doesn't bind up like a traditional impact. It's smooth and a lot more precise than a standard impact.
Hi Guys!!!! That M12 multi-adapter tool is pretty awesome! Hey Vince, did you get a chance to ask the Milwaukee guys any of the questions that we submitted to you?
Yes, some
@@VCGConstruction Thanks Vince! And hey, Vince/Nick, great videos from the Milwaukee show! Camera angles were niceeeee, and focus was solid. The intros/narration were spot on. :-)
Iam completely set up with milwakee, ive dumped about 8grand into these guys. I dont care about being stealthy when on job. I just wasnt to stop taking my tools in for repair and warranty faults.
Youve done a great job just upgrade the electronics and make it more robust.
I got my festool cxs drill 8 years without problems
Question. Would there be a way of converting a Milwaukee mobile case to a gunsmith mobile case with 4-5 draws? Semper Fi
Nice 👍🙏❤️
So they finally caught up to the Makita "t mode",
very nice
"Two M12 tools you've never seen before"....... 🤔 I have seen them before...... When I watched this video yesterday 😉😂
🤣🤣
does dewalt or Milwaukee has a texture gun ???
TL, DW: M12 Fuel Surge impact driver, and M12 Fuel installation drill/ driver
This guy has hand movements like a band director