Mike I have a question r specific to landing a medium-sized foam "sport jet" airframe. On final, should the jet remain in a flat attitude over the runway in a slow, controlled descent, using throttle management, until inches off the runway and bleeding off airspeed, then a small flare to have the mains touch first. Thanks, Ken
I cannot say because the 2200kv is not enough information. The plane could be 20oz or 20 lbs. If you send me the motor brand and model, I can look it up for you and make a recommendation from that. But they probably have recommendations where you bought it or on the site.
Thanks, Mike.
Good video
Mike I have a question r specific to landing a medium-sized foam "sport jet" airframe. On final, should the jet remain in a flat attitude over the runway in a slow, controlled descent, using throttle management, until inches off the runway and bleeding off airspeed, then a small flare to have the mains touch first. Thanks, Ken
Yes... I have a good video on landing here... ruclips.net/video/ISVI2qfjLns/видео.htmlsi=RHTOb0kEy8Vh9YvU
Hi sir I am going to make F22 raptor my motor is 2200 kv for that I am going to use 5 inch 3 blade propeller
Can u please guide me the battery size
I cannot say because the 2200kv is not enough information. The plane could be 20oz or 20 lbs. If you send me the motor brand and model, I can look it up for you and make a recommendation from that. But they probably have recommendations where you bought it or on the site.
@@MichaelWargo A2212 /6T 2200kv blds motor i bought it from flyrobo website from India