I feel like you just proved Tesla‘s experiment might’ve worked on a large scale. You clearly demonstrated even your body transmitting the electricity to the other coil without any danger.
So why wasn’t / isn’t it used commercially? As I understand it vested interests did not allow Tesla to make a commercial success of his technology. There is a claim efficiencies are bad due to impedance?
I really would love to see a next video were you upgrade the transmitter to have more power like 1500wats and upgrade the reciver to be smaller so you can send more power more conveniently at the distance about two meters.
Hey Nick! Your videos are awesome, informative, engaging and entertaining. You are on to something here. Real talent and expertise. 700 followers to boot. I enjoy watching, but I just read the comments thread and you are reaching real people and your responses are genuine. Keep it up!
Amazing explanation and a huge thanks for going deeper into these less known effects. I would be very interested if a very good ground could enable another coil to get pretty far from the original source. Of course if it is perfectly tuned. I am not sure though if it had anything to do with the upper atmosphere as so many people claim. Please note that the old newspaper pictures in the articles are journalistic clickbait if I may call it that lol. Or at least a mistake since people only saw the cool sparks it makes but that was only the way Tesla advertised his cool stuff. Even today people saw the pictures and videos today how Tesla coils make sparks so everyone assumes that's the intended use haha. Pretty far from it in fact. You are absolutely correct that this radio worked as a "ground radio". Even the patent explains that the media for transmission is the earth ground not the air and says the less is put into the air the better. That's why the huge ball at the top so it does not discharge no matter how high the voltage is. Unlike our current radios which try to create a resonant antenna that is floating from ground. Very different! Imagine if Tesla made that huge tower the who ground would be "part of" the circuit so any user with his/ger pegs on the ground is basically zero keters from the source of the energy as it is all the capacitor. In that sense yes the ionosphere kinda matters but only because it's a huge capacitor.
Right, sparks are for fun but wasting energy by destroying potential and make equlibrium. Low coupling, capacitive transmission are real deal and transmission line and third coil are missing. Also standing wawes phase shift and scallar (no magnetic component) also missing. One transmitting oscillaror and many surrounding resonant coils = possible overunity. None, including me, do not really know what is magnified with magnified amplifier. There are lot of playing with Tesla technology. Cheers!
Could you make the resonance frequency the same as earths to transfer energy more easily on large scales? Use the magnetic field to help spread the energy through the air?
I am interested in why you use a variac to control the output power? It must have to do with stepping up the output voltage? Also are you familiar that there is a company based in Texas that is actually doing actual full-scale testing on Tesla's original wireless power delivery technology? It should only take a simple Google search but if you can't find it please reply to let me know and I will find the source for you.
As Firefox stated, yes the reason for the variac is simply to limit the input power to my VTTC, because the tube I'm using here cannot handle running this coil at full power without red-plating. I was not familiar with this Viziv Technologies company nor their work on wireless power, before you mentioned it here, no. It seems that their technology utilizes a phenomenon known as Zenneck surface waves, something I was also not familiar with, before looking this company up. From the little bit I've learned so far, this is somewhat related, but actually different than Tesla's wireless power concept. This concept claims to be able to overcome some of the limitations of Tesla's concept (i.e., resonant coupling), some of which you can see in my video. Viziv doesn't seem to provide a lot of concrete technical details on how their system is supposed to work, which is a little suspect to me, but there also seems to be some recent peer reviewed research from other groups, experimentally demonstrating that Zenneck wave based wireless power transmission is feasible, at least on small scales. Regardless, this seems like a fascinating topic and something I am definitely going to keep an eye on. Thank you for mentioning this!
@@CoilLabs awesome, I don't usually get replied to by content makers so that's also awesome. I'm glad that I could show you something that you'll probably make a video on later. Great interaction I appreciate it.
If u put 400 such receivers around the transmitting coil, all loads will consume 400 watts in total and the transmitting coil will still consume 388 watts only.
How do powerplants get the electricity from the plant to the transmission line? Dont they send it wirelesly to the first transformer in the transmission line?
They are not directly connected. The base of the secondary of each coil is connected to it's own piece of sheet metal laying on the concrete floor as a kind of "counterpoise". So it's just capacitive coupling into the concrete floor / ground.
@@CoilLabs thank you, I’ll have to do some more experimenting. I got it to work with the bottom of the secondary’s both connected but the problem I’ve had with connecting them with sheet metal is it starts to burn and etch Lichtenberg figures in the concrete towards the other coil.
Yeah I tried that off camera, but never got it to happen, even with the coils closer together. Definitely need more power than that 833A tube and circuit can handle. My grid leak resistor gets crazy hot too, I realized while doing this. Never ran the coil for 5+ minutes at a time before this.
I need to build up some more robust infrastructure to run that other tube properly and truly utilize it's potential. Probably do a more serious build around that a bit later.
@@CoilLabs oh yeah plus you need to film and edit a bunch, actually do a good job, and probably make it look good and be on a base. Let's just say I do none of those things :)
If I moved them closer to increase the coupling and put breakout points on both of them, then probably yes. I'm running them without breakout points here because I don't want the energy getting dissipated into a spark.
The driver side of this coil is essentially the same as Steve Ward's VTTC5 (www.stevehv.4hv.org/VTTC5.htm), which is driven by an 833A vacuum tube. The receiver coil is a nearly identical coil and toroid. The step-down LC circuit at the base of the receiver was total trial and error, just trying to match the resonant frequency of the coil.
interesting demonstration. But standing in between, could that not also detune the coils, due to their low capacity? Personally I find dielectric coupling very interesting as it uses displacement currents. For me it is not only conducted through the air, but even more so though the earth ground. Why? because displacement currents are conducted through dielectric mediums. And earth has a higher K value than air. This is also what Tesla intended to do at wardenclyfe. And he tried increasing the dielectric induction into the earth by adding an extra coil, and capacitor to the secondary. making it a series (extra coil and cap) and parallel (secondary and cap) resonant system.
It probably does detune the coils a bit, yes, but it seems not significantly enough to affect the result in this particular experiment. And yes, there are most likely displacement currents through the ground, from the grounded side of the coils, as well. It has to complete the "circuit" somehow. There's definitely more research to be done and things to learn here. It's unfortunate how much pseudoscience and conspiracy theories pollute the discussion around these topics though and get in the way of real science. Hopefully more people are doing proper research on this stuff.
@@CoilLabs the most important thing that probably get overlooked, is that the more higher voltage you get on your coil, the greater is the efficiency of transmission. A proper device is at least three orders of magnitude higher voltage than your setup in this video. Are you sure that "we know today that the system envisioned by Tesla wouldn't work"?
Ok, practical use question. If I had a a drone flying 20 feet of the ground, maintaining position inside a 2 meter cubic meter space. And for the transmitted I have a high gain antenna able to very accurately remained pointed at the drone. Is it possible to transmit enough energy to the drone to both power it in flight and have surplus energy to also charge the battery at a reasonable rate ? Say, 100 watts on the receiver end, now more than 100 gram for the energy receiver on the drone and functionnal even if the target moves around. Is that feasible ? I want a drone that can autonomously fly around for 20 minutes, then hover at a certain location for 20 minutes and get recharged.
You're talking about a very different kind of wireless power transmission than what I show here. The two effects I show here are both "near-field" effects using either magnetic fields or electric fields. The strength of these fields diminishes very quickly with distance. What you're talking about is a "far-field" effect, using electromagnetic radiation, presumably in the radio frequency range. I haven't researched it extensively, but from what I've seen, transmitting appreciable amounts of power over RF is very difficult even with high gain directional antennas. Much larger antennas than you could carry on a personal drone, for certain. A more practical method for something like this that people are researching is using lasers, but 100 watts continuous is far beyond what any commonly available lasers can do. Now instead, if you were to use resonant inductive coupling, where the drone carries a large coil and has capacitors to form a tuned LC circuit at the resonant frequency of the transmitter, and with a much more powerful transmitter than I have here, then yes it could be possible. 100 watts is pretty high, but it could be possible. Hard for me to comment on position control tolerance for the recharging zone and other requirements specifically. There are so many variables. Sounds like a really cool experiment, though!
Very interesting I appreciate the experiment and set up however I have a question as a relates to the impossibility of being able to use wireless transmission globally Oran similarly large scales. Are there or were there geological in Edmonds fear conditions in the distant past that could have been more constant and stable? Further are there any geographical areas on a smaller scale that would have a more constant range of of resonance for safe electrical transmission?
Great experiment & content. Have you expanded this at all? Would be cool to have a remote control car hooked up and see how range could be tested. I also imagine the size produces diminishing returns on that scale (i.e. do you think a larger coil/wheel/vehicle could produce greater range? or vice versa?) 380:1 is definitely not optimal, but I'm curious how much this could be improved. Keep up the good work.
Thank you! Larger scale of the coils would probably help, but it's an effort of diminishing return. Capacitive coupling is just not an effective strategy for any sort of longer distance. At this time, I haven't done much more, but I'm interested in exploring related concepts, like Zenneck surface waves. There's definitely some new technologies that could potentially come out of further research into that topic. Unfortunately, there's also a lot of pseudoscience and conspiracy theories revolving around this topic, so there's a need for more scientific perspective on a lot of this stuff.
@@CoilLabs The thing people forget is the crazy amount of power Tesla used for his experiments. Didn't he damage one of the drive shafts on one of the generators at a hydro plant?
I know Tesla designed generators that were installed at the Niagara falls power station, but I'm not familiar with any particular incidents though. Could be possible, but I'm not familiar.
Can't you just detect the current schuman resonance with a sensor and just adjust your devices to use whatever frequency you need in order to use this in long distances?
I'm not super familiar with the details of Schuman Resonance, but those frequencies are in the 10s of Hz range, right? That's an incredibly low frequency in terms of resonant transformers, like Tesla coils. Even very large coils are still 10s to 100s of kHz. 10 Hz is practically impossible to achieve with a traditional Tesla coil, on a human scale. You would need a completely different technology. Something similar to this effect is what I suspect Tesla was hoping for in his experiments though, but from the little bit I've read about it, what we call Schuman Resonance today wasn't well studied or understood until well after Tesla's death, so it wasn't an existing concept that he or anyone else at the time could have leveraged in his experiments. Even if it was, however, my understanding is it still wouldn't be capable of achieve what he envisioned. Primarily due to the fact that the energy spreads out large areas and you would need to transmit wildly, impractically large amounts of power to have anywhere close to a "useful" energy density at a distant location. This problem of scale is part of where Tesla was wrong in thinking worldwide wireless power was feasible.
@@CoilLabs Thanks for the food for thought! Do you in any case know what patent # is being talked about here? : "Tesla's patent attorney conducted a three day deposition in conjunction with a patent he filed on wireless energy transmission" - It's from a forum thread that's archived and I'm unable to contact the original poster... Help, please :D
As I understand it, the earth frequency creates a quarter wavelength of about 8.4 inches. In waveguide terms this is roughly the same size as some of the channels in the pyramids. This would yield a useful frequency of 440Hz (math by Alexa). There is speculation that the pyramids were power manipulators of sorts. It is why Tesla was very interested in them. I am not ready to dismiss the concept of his patent number 645576 based on this mini-proof-of-concept model since wavelength size does vary with frequency (and then there is amplitude as well). Am guessing the video used 60Hz power which is not 440Hz. It is very controversial and I don't think the concept has been investigated enough.
Very cool, and informational, video. Reminds me of the story about electromagnetic harvesters that operates on the same principal. Keep the great videos coming.
Okay but wat if u ran the tesla coil backwards. you have a big conductor ball in the ion sphere,and pull high voltage down and send it were ever meaning instead of a pretty spark and lighting show by sending sparks through the top,you take high voltage in the top and send it down to earth ground .,,not possible? We'll ion harvesting group is running a small town off just that, from founding from the government,it very open source,people has got tesla coils backwards it makes a pretty light show but not wat he was doing
Put a big conductor ball as high as tesla did with a grounding system like tesla did,you can pull millions of amps and volts down,tesla grounding system was cooled with liquid nitrogen,shows how much energy was going through it,and guess wat,no input energy required,like Benjamin Franklin with the kite,wats the c.o.p on that I think it's infinity,people run tesla coils backwards.ot makes a good show but not wat he was doing everyone has it bassakwards
This should have 1.7m views not 1.7k. DoDdy only approves of the male side of Tesla's system. My pulsed-DC coil is cool but its a basic video it shouldnt have more views than this. YT is no longer viable for science imho its a corporate gangbang now.
I appreciate that! There's an unfortunate amount of pseudoscience and conspiracy theories around this topic. A lot of ridiculous claims being made by people who do not apply proper scientific methods. I completely agree that Tesla was disrespected by both his peers and historians and that his research into this topic being shut down was a stupid knee-jerk reaction out of unfounded fear from non-experts. There's more to be learned here, a lot of really interesting research still to be done, and possibly some really cool new technologies to be developed, but it's really frustrating to see how much this space is polluted by pseudoscience.
Telluride wave used on Tesla systems. Wave traveling through ground. Not hertzion or sky wave. LMD-Longitudinal Magneto Dielectric mode. Public system never completed. The quick fast wrong opion that Tesla was wrong is why I get annoyed. If you can't figure out why it works people are quick to say it doesn't work. Then they make something not patented by Tesla and try to do it with that ish. Dislike button is now gone so I guess I have to put comments on all Tesla 🗑 talkers. 🤨. Please ask RUclips to enable dislikes again. Tks.
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
I feel like you just proved Tesla‘s experiment might’ve worked on a large scale. You clearly demonstrated even your body transmitting the electricity to the other coil without any danger.
So why wasn’t / isn’t it used commercially? As I understand it vested interests did not allow Tesla to make a commercial success of his technology. There is a claim efficiencies are bad due to impedance?
Here is the thing. They are inefficient AF. The high voltage and high frequency means most of the power is just wasted through capacitive coupling.
I really would love to see a next video were you upgrade the transmitter to have more power like 1500wats and upgrade the reciver to be smaller so you can send more power more conveniently at the distance about two meters.
Hey Nick! Your videos are awesome, informative, engaging and entertaining. You are on to something here. Real talent and expertise. 700 followers to boot. I enjoy watching, but I just read the comments thread and you are reaching real people and your responses are genuine. Keep it up!
Thank you, I really appreciate that!
Amazing explanation and a huge thanks for going deeper into these less known effects. I would be very interested if a very good ground could enable another coil to get pretty far from the original source. Of course if it is perfectly tuned. I am not sure though if it had anything to do with the upper atmosphere as so many people claim.
Please note that the old newspaper pictures in the articles are journalistic clickbait if I may call it that lol. Or at least a mistake since people only saw the cool sparks it makes but that was only the way Tesla advertised his cool stuff. Even today people saw the pictures and videos today how Tesla coils make sparks so everyone assumes that's the intended use haha. Pretty far from it in fact.
You are absolutely correct that this radio worked as a "ground radio". Even the patent explains that the media for transmission is the earth ground not the air and says the less is put into the air the better. That's why the huge ball at the top so it does not discharge no matter how high the voltage is. Unlike our current radios which try to create a resonant antenna that is floating from ground. Very different!
Imagine if Tesla made that huge tower the who ground would be "part of" the circuit so any user with his/ger pegs on the ground is basically zero keters from the source of the energy as it is all the capacitor. In that sense yes the ionosphere kinda matters but only because it's a huge capacitor.
Right, sparks are for fun but wasting energy by destroying potential and make equlibrium. Low coupling, capacitive transmission are real deal and transmission line and third coil are missing. Also standing wawes phase shift and scallar (no magnetic component) also missing. One transmitting oscillaror and many surrounding resonant coils = possible overunity. None, including me, do not really know what is magnified with magnified amplifier. There are lot of playing with Tesla technology. Cheers!
Yes! I always look forward to watching your videos man. Nice work as always.
Great video! You put a lot of work into this! Thanks for keeping it somewhat understandable!
Nick! This video is sick, thanks for teaching me!
Great Tesla Coil video!
I learned A LOT
Your channel is underrated. Finally! A RUclipsr that really understands how Tesla coils work! 😎👍
Could you make the resonance frequency the same as earths to transfer energy more easily on large scales? Use the magnetic field to help spread the energy through the air?
To my knowledge the earth does not have a single resonant frequency that can be harnessed.
I am interested in why you use a variac to control the output power? It must have to do with stepping up the output voltage? Also are you familiar that there is a company based in Texas that is actually doing actual full-scale testing on Tesla's original wireless power delivery technology? It should only take a simple Google search but if you can't find it please reply to let me know and I will find the source for you.
His tube overheats at 120v input power. That is why he uses the variac to control the voltage.
As Firefox stated, yes the reason for the variac is simply to limit the input power to my VTTC, because the tube I'm using here cannot handle running this coil at full power without red-plating.
I was not familiar with this Viziv Technologies company nor their work on wireless power, before you mentioned it here, no. It seems that their technology utilizes a phenomenon known as Zenneck surface waves, something I was also not familiar with, before looking this company up. From the little bit I've learned so far, this is somewhat related, but actually different than Tesla's wireless power concept. This concept claims to be able to overcome some of the limitations of Tesla's concept (i.e., resonant coupling), some of which you can see in my video. Viziv doesn't seem to provide a lot of concrete technical details on how their system is supposed to work, which is a little suspect to me, but there also seems to be some recent peer reviewed research from other groups, experimentally demonstrating that Zenneck wave based wireless power transmission is feasible, at least on small scales. Regardless, this seems like a fascinating topic and something I am definitely going to keep an eye on. Thank you for mentioning this!
@@CoilLabs awesome, I don't usually get replied to by content makers so that's also awesome. I'm glad that I could show you something that you'll probably make a video on later. Great interaction I appreciate it.
awesome nick!
If u put 400 such receivers around the transmitting coil, all loads will consume 400 watts in total and the transmitting coil will still consume 388 watts only.
How do powerplants get the electricity from the plant to the transmission line? Dont they send it wirelesly to the first transformer in the transmission line?
just found your channel a love you vids
Loved the video. Quite the statement to say it couldn't work vs it needs some work, teehee 💪🏽
pretty nice!! ;)
Are your grounds directly connected or connected or just conected to the ground of your shop?
They are not directly connected. The base of the secondary of each coil is connected to it's own piece of sheet metal laying on the concrete floor as a kind of "counterpoise". So it's just capacitive coupling into the concrete floor / ground.
@@CoilLabs thank you, I’ll have to do some more experimenting. I got it to work with the bottom of the secondary’s both connected but the problem I’ve had with connecting them with sheet metal is it starts to burn and etch Lichtenberg figures in the concrete towards the other coil.
Your videos are grear keep on good work it will pay of💪💪😁
That’s really cool! If you dump enough power into it and move the other secondary closer and turn it correctly, you can get breakout on it too!
Yeah I tried that off camera, but never got it to happen, even with the coils closer together. Definitely need more power than that 833A tube and circuit can handle. My grid leak resistor gets crazy hot too, I realized while doing this. Never ran the coil for 5+ minutes at a time before this.
@@CoilLabs water resistor grid leak works, although it does do electrolysis. When do you plan to get your other tube up-and-running in this coil?
I need to build up some more robust infrastructure to run that other tube properly and truly utilize it's potential. Probably do a more serious build around that a bit later.
@@CoilLabs oh yeah plus you need to film and edit a bunch, actually do a good job, and probably make it look good and be on a base. Let's just say I do none of those things :)
@@CoilLabs You could use a GU-81 pentode or a GU-5B triode, they are mutch more powerfull tubes.
excelente explicación amigo
saludos amigo
Lov it. Nice video
so lets say i make that second repeater coil smaller in size and permanently attached to the lamp. do we not get our desired effect then?
Can you make both secondaries discharge lighting at the same time?
If I moved them closer to increase the coupling and put breakout points on both of them, then probably yes. I'm running them without breakout points here because I don't want the energy getting dissipated into a spark.
How can we make a longer range?
Where can I get these specs or such so I can replicate this demonstration!?
The driver side of this coil is essentially the same as Steve Ward's VTTC5 (www.stevehv.4hv.org/VTTC5.htm), which is driven by an 833A vacuum tube. The receiver coil is a nearly identical coil and toroid. The step-down LC circuit at the base of the receiver was total trial and error, just trying to match the resonant frequency of the coil.
interesting demonstration.
But standing in between, could that not also detune the coils, due to their low capacity?
Personally I find dielectric coupling very interesting as it uses displacement currents.
For me it is not only conducted through the air, but even more so though the earth ground.
Why? because displacement currents are conducted through dielectric mediums.
And earth has a higher K value than air.
This is also what Tesla intended to do at wardenclyfe. And he tried increasing the dielectric induction into the earth by adding an extra coil, and capacitor to the secondary.
making it a series (extra coil and cap) and parallel (secondary and cap) resonant system.
It probably does detune the coils a bit, yes, but it seems not significantly enough to affect the result in this particular experiment. And yes, there are most likely displacement currents through the ground, from the grounded side of the coils, as well. It has to complete the "circuit" somehow. There's definitely more research to be done and things to learn here. It's unfortunate how much pseudoscience and conspiracy theories pollute the discussion around these topics though and get in the way of real science. Hopefully more people are doing proper research on this stuff.
@@CoilLabs the most important thing that probably get overlooked, is that the more higher voltage you get on your coil, the greater is the efficiency of transmission. A proper device is at least three orders of magnitude higher voltage than your setup in this video. Are you sure that "we know today that the system envisioned by Tesla wouldn't work"?
Ok, practical use question. If I had a a drone flying 20 feet of the ground, maintaining position inside a 2 meter cubic meter space. And for the transmitted I have a high gain antenna able to very accurately remained pointed at the drone. Is it possible to transmit enough energy to the drone to both power it in flight and have surplus energy to also charge the battery at a reasonable rate ?
Say, 100 watts on the receiver end, now more than 100 gram for the energy receiver on the drone and functionnal even if the target moves around. Is that feasible ?
I want a drone that can autonomously fly around for 20 minutes, then hover at a certain location for 20 minutes and get recharged.
You're talking about a very different kind of wireless power transmission than what I show here. The two effects I show here are both "near-field" effects using either magnetic fields or electric fields. The strength of these fields diminishes very quickly with distance. What you're talking about is a "far-field" effect, using electromagnetic radiation, presumably in the radio frequency range. I haven't researched it extensively, but from what I've seen, transmitting appreciable amounts of power over RF is very difficult even with high gain directional antennas. Much larger antennas than you could carry on a personal drone, for certain. A more practical method for something like this that people are researching is using lasers, but 100 watts continuous is far beyond what any commonly available lasers can do.
Now instead, if you were to use resonant inductive coupling, where the drone carries a large coil and has capacitors to form a tuned LC circuit at the resonant frequency of the transmitter, and with a much more powerful transmitter than I have here, then yes it could be possible. 100 watts is pretty high, but it could be possible. Hard for me to comment on position control tolerance for the recharging zone and other requirements specifically. There are so many variables. Sounds like a really cool experiment, though!
finally a new video
I love high voltage, noble gases discharges, ⚡
How would I light up the bulb with another Tesla coil up to 10 feet
well done
Very interesting I appreciate the experiment and set up however I have a question as a relates to the impossibility of being able to use wireless transmission globally Oran similarly large scales. Are there or were there geological in Edmonds fear conditions in the distant past that could have been more constant and stable? Further are there any geographical areas on a smaller scale that would have a more constant range of of resonance for safe electrical transmission?
Daym...can anyone tell me why this guy doesn't have million subs?
I like your funny words, magic man
I just want to be your friend. You are smart and funny. 😂
This has got to be the most wholesome RUclips comment I have ever gotten. Thank you!
@@CoilLabs That makes me happy. 😊
Great experiment & content. Have you expanded this at all?
Would be cool to have a remote control car hooked up and see how range could be tested. I also imagine the size produces diminishing returns on that scale
(i.e. do you think a larger coil/wheel/vehicle could produce greater range? or vice versa?)
380:1 is definitely not optimal, but I'm curious how much this could be improved.
Keep up the good work.
Thank you!
Larger scale of the coils would probably help, but it's an effort of diminishing return. Capacitive coupling is just not an effective strategy for any sort of longer distance.
At this time, I haven't done much more, but I'm interested in exploring related concepts, like Zenneck surface waves. There's definitely some new technologies that could potentially come out of further research into that topic. Unfortunately, there's also a lot of pseudoscience and conspiracy theories revolving around this topic, so there's a need for more scientific perspective on a lot of this stuff.
@@CoilLabs The thing people forget is the crazy amount of power Tesla used for his experiments. Didn't he damage one of the drive shafts on one of the generators at a hydro plant?
I know Tesla designed generators that were installed at the Niagara falls power station, but I'm not familiar with any particular incidents though. Could be possible, but I'm not familiar.
Nikola Tesla was able to send wireless power two miles away to light to incandescent bulbs
Why can't I SEE the video? I can hear it though.
Awsome
I like the channel
If the two Tesla Tesla coils don't use a capacitor, the powered Tesla coil can still send electricity to the unpowered Tesla coil?
Don't use which capacitor? Not sure I understand what you're asking.
6:09 ! Yep ! xD
Can't you just detect the current schuman resonance with a sensor and just adjust your devices to use whatever frequency you need in order to use this in long distances?
I'm not super familiar with the details of Schuman Resonance, but those frequencies are in the 10s of Hz range, right? That's an incredibly low frequency in terms of resonant transformers, like Tesla coils. Even very large coils are still 10s to 100s of kHz. 10 Hz is practically impossible to achieve with a traditional Tesla coil, on a human scale. You would need a completely different technology. Something similar to this effect is what I suspect Tesla was hoping for in his experiments though, but from the little bit I've read about it, what we call Schuman Resonance today wasn't well studied or understood until well after Tesla's death, so it wasn't an existing concept that he or anyone else at the time could have leveraged in his experiments. Even if it was, however, my understanding is it still wouldn't be capable of achieve what he envisioned. Primarily due to the fact that the energy spreads out large areas and you would need to transmit wildly, impractically large amounts of power to have anywhere close to a "useful" energy density at a distant location. This problem of scale is part of where Tesla was wrong in thinking worldwide wireless power was feasible.
@@CoilLabs Thanks for the food for thought! Do you in any case know what patent # is being talked about here? :
"Tesla's patent attorney conducted a three day deposition in conjunction with a patent he filed on wireless energy transmission" - It's from a forum thread that's archived and I'm unable to contact the original poster... Help, please :D
You're welcome! And no, I don't know anything about Tesla's specific patents. I'm afraid I can't help you there.
@@CoilLabs Oh, my bad, I just kinda assumed you make these devices following a patent :D
As I understand it, the earth frequency creates a quarter wavelength of about 8.4 inches. In waveguide terms this is roughly the same size as some of the channels in the pyramids. This would yield a useful frequency of 440Hz (math by Alexa). There is speculation that the pyramids were power manipulators of sorts. It is why Tesla was very interested in them. I am not ready to dismiss the concept of his patent number 645576 based on this mini-proof-of-concept model since wavelength size does vary with frequency (and then there is amplitude as well). Am guessing the video used 60Hz power which is not 440Hz. It is very controversial and I don't think the concept has been investigated enough.
If you don't sintonize correctly the radio It don't work , Tesla coil Is the same
Test a variation with bifilar coil, It work Better😉
Very cool, and informational, video. Reminds me of the story about electromagnetic harvesters that operates on the same principal. Keep the great videos coming.
Try using bifilar coil
Reverse the current draw in
6:00 dancing time
By the way I am from Croatia, just like Nikola Tesla
Yes good
Okay but wat if u ran the tesla coil backwards. you have a big conductor ball in the ion sphere,and pull high voltage down and send it were ever meaning instead of a pretty spark and lighting show by sending sparks through the top,you take high voltage in the top and send it down to earth ground .,,not possible? We'll ion harvesting group is running a small town off just that, from founding from the government,it very open source,people has got tesla coils backwards it makes a pretty light show but not wat he was doing
this energy was used years ago the elite have it under raps but time is up COSMIC ENERGY
Westinghouse didn't like the idea of free energy and that's why he cut his funding. Should tell the story as it is. Not for
You look a bit scary
Put a big conductor ball as high as tesla did with a grounding system like tesla did,you can pull millions of amps and volts down,tesla grounding system was cooled with liquid nitrogen,shows how much energy was going through it,and guess wat,no input energy required,like Benjamin Franklin with the kite,wats the c.o.p on that I think it's infinity,people run tesla coils backwards.ot makes a good show but not wat he was doing everyone has it bassakwards
This should have 1.7m views not 1.7k. DoDdy only approves of the male side of Tesla's system. My pulsed-DC coil is cool but its a basic video it shouldnt have more views than this. YT is no longer viable for science imho its a corporate gangbang now.
I appreciate that! There's an unfortunate amount of pseudoscience and conspiracy theories around this topic. A lot of ridiculous claims being made by people who do not apply proper scientific methods. I completely agree that Tesla was disrespected by both his peers and historians and that his research into this topic being shut down was a stupid knee-jerk reaction out of unfounded fear from non-experts. There's more to be learned here, a lot of really interesting research still to be done, and possibly some really cool new technologies to be developed, but it's really frustrating to see how much this space is polluted by pseudoscience.
Telluride wave used on Tesla systems.
Wave traveling through ground.
Not hertzion or sky wave.
LMD-Longitudinal Magneto Dielectric mode.
Public system never completed.
The quick fast wrong opion that Tesla was wrong is why I get annoyed. If you can't figure out why it works people are quick to say it doesn't work. Then they make something not patented by Tesla and try to do it with that ish. Dislike button is now gone so I guess I have to put comments on all Tesla 🗑 talkers. 🤨. Please ask RUclips to enable dislikes again. Tks.