Congrats on your PB!🎉🏆 I know my little Cobra has the same wire drive setup as the Mini Dom & the cable does bend easy. Also learned from Dr. Jet and Mr. Mad that these need to be cleaned and lubed after every run, because water gets stuck in the stuffing tube by it's nature. Also, when you are putting the 2 grub screws back in the coupler, snug one side up before putting the other side in so it doesn't bend the end of the wire shaft. Ask me how I know.. 🙄😄
Good to know! I really tightened it and most likely bent it. I’ll be a little easier on subsequent bearing maintenance when tightening and will lube up the bearings. Appreciate the info!
Regarding the mini Dom It's seems like the shaft. Those stock shafts (and oxi drive) bend very easily That red prop I beleive is a 30mm of I'm not mistaken
Ahh that very well could be. I could maybe throw a few extra bearings in there to shorten the distance between the bearings to soften the vibration a bit. Good call!
Sorry the dom was out of frame lol. I’ll get another vid soon!
Congrats on your PB!🎉🏆 I know my little Cobra has the same wire drive setup as the Mini Dom & the cable does bend easy. Also learned from Dr. Jet and Mr. Mad that these need to be cleaned and lubed after every run, because water gets stuck in the stuffing tube by it's nature. Also, when you are putting the 2 grub screws back in the coupler, snug one side up before putting the other side in so it doesn't bend the end of the wire shaft. Ask me how I know.. 🙄😄
Good to know! I really tightened it and most likely bent it. I’ll be a little easier on subsequent bearing maintenance when tightening and will lube up the bearings. Appreciate the info!
Always enjoy your vids! Thanks for posting.
@@dougjanecek8812 No prob, thanks for watching!
Great vid man!! Nice score on a Mini Wow!
@@oxidean Yea I was surprised when it popped up. Bummer the run was out of frame but will get another, hopefully in frame vid soon!
@VetteWay2Fast Awesome man!
Regarding the mini Dom
It's seems like the shaft. Those stock shafts (and oxi drive) bend very easily
That red prop I beleive is a 30mm of I'm not mistaken
Ahh that very well could be. I could maybe throw a few extra bearings in there to shorten the distance between the bearings to soften the vibration a bit. Good call!
Yea! Just don't hurt his feelings!
Lol
It is a stable boat! Does your boat have a cardboard back at the transom on the inside? Just curious.
@@RDM-RC Which one?
The red one. @@VetteWay2Fast
@@RDM-RC No it’s just the fiberglass in the back without a reinforcement. Prob doesn’t need it tho with how small it is I would think
Good thing I didn’t want to see the mini dom run 🤦♂️🤣🤣
@@jaycevessier7554 Lol