How To Set Up a Lay-Z-Spa AirJet™ Hot Tub

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 90

  • @bjrnjacobdavy2989
    @bjrnjacobdavy2989 3 года назад +48

    This video saved my life! When i read the manual i didn’t understand anything, then i saw this tutorial and it literally saved me approximately like 3 hours.

    • @TheMono25
      @TheMono25 3 года назад +2

      u really opened the manual did it have anything interesting in it lol

  • @jeffwickersty
    @jeffwickersty 3 года назад +88

    Thank you for this video. The manual is hot garbage. This video is perfect.

  • @grandmastersterling6707
    @grandmastersterling6707 3 года назад +5

    Video saved the day! We thought you just had to tap the on button, but really you have to hold it down

  • @sandrapaterson8678
    @sandrapaterson8678 Год назад +3

    Thank you thank you thank you 👏 was at my wits end until i found this tutorial.

    • @pinballrobbie
      @pinballrobbie Год назад

      Probably the worst manual I have come across.

  • @philipwoodford6286
    @philipwoodford6286 2 года назад +5

    Why the manual isn’t just a QR code to a video like this heaven only knows 🤔🤷‍♂️ thank you this is great for us first timers 🙏

    • @hatorihanzo3431
      @hatorihanzo3431 9 месяцев назад

      hey, did you get one? hows it after 1 yr?

  • @Goboholder
    @Goboholder 3 года назад +51

    Yep, for a £500 product......the manual is an absolute embarrassment.

    • @Djaytekz
      @Djaytekz 5 месяцев назад +2

      It’s so basic how are you so dense

  • @Ok_livia
    @Ok_livia 2 года назад +1

    Thank the instructions were usleless will be sharing the video for others who hv the same spa

  • @dylangotskills8972
    @dylangotskills8972 2 года назад +1

    This. Video. Saved. My life 🎉🎉🎉🎉

  • @stanislaug
    @stanislaug Год назад +2

    Hello. Do you know of if there is any air filter inside the unit? Once it sucks air into to water, there should be a filter for the air... and how to clean it? Thanks

  • @mehitabel1290
    @mehitabel1290 2 года назад +4

    Very clear and helpful. Thankyou.

  • @carolslattery792
    @carolslattery792 3 года назад +5

    Thanks so much this video really helped with setting up. Brilliant 👍

  • @rccgmaranathaa
    @rccgmaranathaa 2 года назад +2

    My question is can you leave it permanently inflated and covered up to use someother time?
    Or must you always deflate and drain after use?

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад +1

      If you intend on using it frequently, say at least once or twice a week, we would recommend keeping it setup. Many Lay-Z-Spa users leave theirs setup all year round.

    • @crystalfurrow2310
      @crystalfurrow2310 2 года назад

      @@Lay-Z-Spa-UK what chemicals do we use?

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад

      @@crystalfurrow2310 we recommend using Clearwater Chemicals. The Clearwater Hot Tub Starter Kit is a great choice for beginners as it comes with a chemical guide and includes all the chemicals that you need to get started.

  • @shaznewhite1598
    @shaznewhite1598 3 года назад +4

    I’m struggling to heat up the hot tub, the temperature won’t stay on 38 and it jump temperature and it decreases it’s stayin on 21 degree

  • @barrytipton1179
    @barrytipton1179 2 года назад

    I have not owned a lay z spar for years I just bought one end of season sale are the floaters in the Madrid box I bought a pool starter kit it’s got powdered chlorine …. I still have 6year old multifunction tablets in my garage

  • @elizabethfleming7614
    @elizabethfleming7614 3 года назад +3

    Trying to set it up the Madrid for the first time having trouble. The doughnut inflated perfectly, but the hot tub will not inflate. Does anyone know what we are doing wrong?

  • @starw6858
    @starw6858 2 года назад

    What are the healthiest chemicals for the skin we can buy? Do you have a starting kit to recommend? Please post a link.

  • @Seren2010kinder
    @Seren2010kinder 2 года назад +2

    Thank you for this maybe you should have a code on the instructions that takes you here as the manual is terrible and I’m normally good at these things

  • @martinwray7001
    @martinwray7001 2 года назад +13

    Very informative, but for future presentations let it be known that this is the worst music ever heard on a RUclips video.

  • @AnalizaMalatbalat-lr8br
    @AnalizaMalatbalat-lr8br 5 месяцев назад

    Thank U so much, kind regards fr ana fr the heart of Australia Dalby Queensland ❤

  • @KateTriumph
    @KateTriumph 4 месяца назад

    Where is the other end of the air pipe entering. It has two ends but you only show one end

  • @seanthompson9176
    @seanthompson9176 2 года назад

    Is the floor supposed to inflate too? Its not in the instructions or video, but there is a valve down there. It does not want to inflate, but I just don't understand why it is there?

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад +1

      Hi Sean,
      The base is padded but does not inflate.
      The valve you see is for drainage and leads to the drainage pipe.

  • @rava6781
    @rava6781 2 года назад

    What about the reset button??? Instructions say use a thin object to press the button in, but there's a large pea size button(labeled reset), and no hole??
    Heater has been on for 4hr and water is at 35 degrees still (we filled it with 34 degree water) and we had it set to 37??
    I pressed in the reset button with a finger, is it just press and done? Should the heater be on or off? Filter on or off? Device on or off?? Should the display change? How do we know the reset was done successfully?
    Instructions are bad.
    And at this point idk if my spa is even heating??

  • @craiglydon8840
    @craiglydon8840 2 года назад +1

    Thankyou very helpfull

  • @mdenamulhaque1285
    @mdenamulhaque1285 9 месяцев назад +1

    Nice video

  • @nathan5661
    @nathan5661 3 года назад +6

    The deflation part is in a different order to what it says in the manual?

  • @itscoronatime1494
    @itscoronatime1494 Год назад

    Is it okay to use chloride in way smaller form than used in the video. The cloride i have are way smaller bits that i think i just have to add to the water

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  Год назад

      Hi,
      The only tablets we can think of like that are these: www.lay-z-spa.co.uk/clearwater-mini-qik-tablets.html
      They're intended to give a quick boost of chlorine. Ideally or ongoing water treatment, you should use slow release tablets in the dispenser or granules which can be dissolved then added to the water.

  • @KateTriumph
    @KateTriumph 4 месяца назад

    Where is the other end entering. It has two ends but you only show one end

  • @casinodelonge
    @casinodelonge 2 года назад

    The thing t5hat you screw into the compressor to inflate is full of holes! The air just blows straight out of it! I had a load of mysterious bits I have no idea what they are for!

    • @Alan_H
      @Alan_H 2 года назад +1

      The holes are there to keep the pressure at a standard rate I think. Prevents over inflation.

  • @davidroginsky8076
    @davidroginsky8076 3 года назад +2

    mine never gets like that when you store it..lol...and it leaks air

  • @mrpep6340
    @mrpep6340 3 года назад +6

    i fill with warm water it takes ages and loads of power to heat cold water. ive got an attachment that fits over my mixer taps in the kitchen and fill with a mix of hot and cold

    • @Hustl3club
      @Hustl3club 3 года назад

      What attachment is that? I need it because it takes too long to heat up

    • @mrpep6340
      @mrpep6340 3 года назад

      @@Hustl3club i dont know what its called but if you go to B&Q youll find them in the hose pipe section. your hose connects to the bottom and then it fits over your mixer tap, mine is grey and yellow. costs about a fiver

  • @cherylcleekers1258
    @cherylcleekers1258 2 года назад

    Do I put tablets in Chen connect and use the ph plus/ph minus, or is it one or the other?

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад

      Hi Cheryl,
      The ChemConnect is for slow dissolving tablets such as Chlorine or the ClearWater Multifunction tablets. pH +/- comes in granules which should be dissolved in a small amount of water then applied directly into the Lay-Z-Spa.

  • @marianaruizvaldiviezo4164
    @marianaruizvaldiviezo4164 3 года назад +1

    Se le puede agregar sales de baño al lay-z-spa?

  • @einarben595
    @einarben595 2 года назад

    I had to bring heather box inside so it would start up...10 min inside .if not it displays error code E03....had it inside for 10 min ..and connect then no erroe code ..... walla everything works .it takes time to warm water to 10 c then it heats up

  • @chrisgertken4158
    @chrisgertken4158 2 года назад

    My water intake port connection is bent really bad, I think that it is affecting my filtering. Can someone please help

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад

      Hi Chris,
      You need to very carefully (for your own safety) pour a bit of boiling water into the pipe to loosen the plastic and make it mouldable, then attempt to reshape the pipe.

    • @chrisgertken4158
      @chrisgertken4158 2 года назад

      @@Lay-Z-Spa-UK can it be replaced

  • @paulinavalenzuela8749
    @paulinavalenzuela8749 Месяц назад

    Excelente 👌

  • @Infantz09
    @Infantz09 Год назад

    Still confused lol she blew up the floor and didn't place it in the hot tub?

    • @helenekquaynor
      @helenekquaynor Год назад

      The extra bit she blew up goes on the top not for the floor of the pool

    • @Infantz09
      @Infantz09 Год назад

      ​@@helenekquaynorI realised this the day I done it lol thank you

  • @tarnyadickens8475
    @tarnyadickens8475 3 года назад +1

    Please help, how to set timers I don’t get how plz help

  • @ChrisMelville
    @ChrisMelville 2 года назад +2

    Would be better with a narration instead of the music.

  • @fenech2013
    @fenech2013 4 месяца назад +2

    the instructions were written by harvey price

    • @si.6859
      @si.6859 3 месяца назад

      😂😂

  • @scotthopkins7711
    @scotthopkins7711 3 года назад +3

    My pump exactly the same as this makes a high pitch noise when the bubbles are on. Drives me mad I can’t relax. Any solutions to solve would be great I have tried everything.

    • @Sinners4SaintsTV
      @Sinners4SaintsTV 3 года назад

      Could be defective. I’d reach out to the manufacturer and see what they say

    • @scotthopkins7711
      @scotthopkins7711 3 года назад +1

      I have just found that the pipe feeds the air into the tub might be the issue. Once connected and I ran the bubbles on I then turned off. I loosened the pipe and air came out until the water the came out after. Tightened back up and the noise is gone.

    • @scotthopkins7711
      @scotthopkins7711 3 года назад

      The fix is the pipe that feeds the air for he bubbles once connected run the bubbles turn off then loosen the pipe and let the air out until water comes out. Problem solved.

  • @mindyedwards2699
    @mindyedwards2699 2 года назад +1

    A bit confused as to why the video is showing an attachment on top of the one above the filter. that's the one to float in the spa with the chlorine tablets in. no wonder people having trouble heating there hot tubs if they follow this.

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  2 года назад

      Hi Mindy,
      I believe you're referring to the ChemConnect?
      This does attach inside the hot tub and works in the same way as a chemical floater

  • @maifridell6134
    @maifridell6134 2 года назад +2

    Thank you . I never fix this with the terrible manual. 🥰

  • @misswalker3878
    @misswalker3878 3 года назад +2

    Can you use the hose water or do you have to put warm water into it aswell? X

    • @agentmrp
      @agentmrp 3 года назад +1

      I fill mine up half way with the water on cold and fill the other half with warm. Else you will be waiting hours for it to warm up! And yh you can just use the hose from your tap👍

    • @shaznewhite1598
      @shaznewhite1598 3 года назад

      If I may ask how do I heat up the hot tub? As I’m struggling and the temperature won’t stay on 38 it decreases

    • @FriendlyShadow09
      @FriendlyShadow09 3 года назад

      @@shaznewhite1598 It may be turning off on you when reaching the set tempeture?

  • @michaelmira3447
    @michaelmira3447 3 года назад +8

    The deflation part of the video is a bit vague

    • @MrMoneyLong
      @MrMoneyLong 3 года назад

      agreed

    • @Alan_H
      @Alan_H 2 года назад

      It just deflates like a ball or lilo usually would.

    • @michaelmira3447
      @michaelmira3447 2 года назад

      @@Alan_H It doesn't mate . You need to use the additional pipe to blow the air out of it otherwise it doesn't go down completely

  • @KiwiVanderman
    @KiwiVanderman Год назад +1

    The manual is almost there to throw you off

  • @squishysisters1360
    @squishysisters1360 3 года назад +1

    I am still confused about step 2, what is it sitting in, and there is not instruction between inflating the hot tub and inflating the number 2 bottom pad so how do they go together??

  • @vytautassavickas2028
    @vytautassavickas2028 6 месяцев назад

    I am volkswagen technician by trade and i can tell that you can use manual only to start fire and that's it

  • @kubatv4726
    @kubatv4726 3 года назад +2

    As soon I press bobble button on to inflate hot tub the heater turning on automatically and error e02 is on.

    • @Lay-Z-Spa-UK
      @Lay-Z-Spa-UK  3 года назад +4

      Hi there, this is happening because the air temperature is low and the freezeshield function is kicking in. You can trick the pump by putting some warm water in the pipes to get around this.

    • @jooshozzono7249
      @jooshozzono7249 3 года назад +1

      @@Lay-Z-Spa-UK you're the best uwu

  • @MsDavo123
    @MsDavo123 2 года назад

    incredible tutorial thank you so much they should just provide this link instead of their stupid ass manual in chinese

  • @SNATCHYDBS
    @SNATCHYDBS 2 года назад +2

    Good video bad music ... no need for that irratating noise .. 9 out 10... 😏

  • @JenFoto
    @JenFoto 2 года назад

    Not a substitute for the printed user manual?
    Really? The manual is terrible and doesn't explain anything

  • @madant999
    @madant999 3 года назад

    Brand new not heating up

  • @richardbranson8658
    @richardbranson8658 2 года назад

    I think I'll just have a hot bath..

  • @dylangotskills8972
    @dylangotskills8972 2 года назад

    😂🎉hgty