Congrats on your new machine, Katrina! I was in the same boat a while back, considering getting a DTF machine myself. But honestly, I’m so glad I found a shop that prints DTF just 10 minutes from where I live! As a one-person business, I can’t imagine handling all the extra work of managing powder, paper, ink, and the maintenance that comes with owning a DTF machine. Outsourcing the printing saves so much time and energy. Wishing you lots of success with your new setup-I’m sure it’ll take your business to the next level!
Happy New Year Ms. Katrina..Thank you for all your videos, tutorials. I appreciate all your content. I am bedside not feeling well due to fybromyalgia , but you get my 👍🏽☺and I watch later. Blessings to you and baby.🙏🏽
Congratulations on your new toy Katrina! And thanks so much for sharing your learning journey with us! I pray you have nothing but major success in 2025 and beyond!🎉🎉🎉
@@taviailes9478 it’s just faster if you’re pressing a little t shirts. No wait time. But cold peek is cool too. You can press them all then go back and peel.
I have been doing research I want a printer but I’m on the fence. What heat press do you use? And do you press larger items with it such as XL and 2XL?
i working with a bigger version of this guy if this machine have 2 suction fans in dryer you dont need waste this amount of material, just print and let it going forward enough, and put it on the first suction and turn it on, try it, thats easy, also if your dryer is not proper for doing this you need only stick your wasted pet film to your clean pet film and use it to pass the first parts also if you want to print only single or two designs you can cut it and after powdering seperately put it into dryer with the help of front suction part
Love your machine...to keep from wasting material especially on small prints...take that peice that you cut off and wasted, tape it back to the roll and reverse feed through your oven and shaker...then tape it to your roll. But other than that your doing great!!!!
Or if tour doing 1 inage at a time...dont run it through your shaker and dryer....cut it off and poqder it and shar it by hand ..then use your DTF oven.
Congrats on the new member 👏🏽 I'm not going to lie. It's a lot of wasted material. You might go through it fast 🙂. They should add a leader to the roll to feed through the machine so you don't start off wasting a lot. Can't wait to watch these videos 🤗👏🏽👏🏽👏🏽
Congrats on your new machine, Katrina! I was in the same boat a while back, considering getting a DTF machine myself. But honestly, I’m so glad I found a shop that prints DTF just 10 minutes from where I live!
As a one-person business, I can’t imagine handling all the extra work of managing powder, paper, ink, and the maintenance that comes with owning a DTF machine. Outsourcing the printing saves so much time and energy.
Wishing you lots of success with your new setup-I’m sure it’ll take your business to the next level!
@@johnjen8352 it’s definitely a lot of work. You have to do what’s right for you. Thank you
To provide this level of interactive training for free is pretty dope!
Congratulations❣️ 🎉🎉Another Trailblazer 💯💯
I’m so happy for you
Good luck sweetie ❤❤🎉🇬🇧
Happy New Year Ms. Katrina..Thank you for all your videos, tutorials. I appreciate all your content. I am bedside not feeling well due to fybromyalgia , but you get my 👍🏽☺and I watch later. Blessings to you and baby.🙏🏽
Congratulations on your new toy Katrina! And thanks so much for sharing your learning journey with us!
I pray you have nothing but major success in 2025 and beyond!🎉🎉🎉
@@SMoore-ec7or thank you so much. I pray that same thing over your business 🙌🏽🙏🏽
you can calibrate your white settings in adjustments, because your white is not exacly on cmyk ink
19:42
Congratulations 🎉you always come through for your people with these videos!! Can't wait to start ordering!
@@reginacarr1545 you’re so welcome. I got you
Congrats Katrina!
AWESOME 👏🏽
Congrats on new machine and love how you always introduce us to all your new equipment along with showing how to use them. You’re such an inspiration.
@@shaye663 that’s the only way to do it. Taking you guys on the journey with me. Thank you so much 🙏🏽
I'm so happy for you. You're such an inspiration. Love your spirit and this looks like something I would love to invest in doing. Thank you.
This is the same as my R2 Pro ❤
Good luck cus a lot of people have major problems. I was about to buy one but changed my mind
Love the video couldnt wait but worth waiting..
Thank you so much holiday season and house hunting has me so busy
Do it, Katrina!!!!!
Happy New Year Katrina!!!! 🙂🙂🙂🙂
Congratulations on your new addition to the family! Love it looks great
Congratulations looks good ❤
Looks so good!! Wow
@@TheWomanBeyond thank you
Another great video. Do
You mind sharing why you prefer the hot peel over the cold peel? Is it something we should be considering when purchasing?
@@taviailes9478 it’s just faster if you’re pressing a little t shirts. No wait time. But cold peek is cool too. You can press them all then go back and peel.
Great set up and design.❤
Thank you
i like that
Happy new year 🎈🎊🎆
Happy New Year to you too! 🎉
Hi
Katrina great job
I might look into getting me one lol
@@thewardfamily3640 thank you and you should let me know. Info down below. Be sure to use my name if you do.
I noticed you put it in your garage. Does it not get cold where you are? Or do you have a heated garage? Love the machine!
You are a rock star and are you going to be taking orders once you get set up. I would support you for sure
I have been doing research I want a printer but I’m on the fence. What heat press do you use? And do you press larger items with it such as XL and 2XL?
Excellent! Question …can you put dtf on a cup & sublimate it in an oven?
@@vickyewilliams5764 NO it’s only for garments or fabrics
Yayyyyyy I’m so waiting to order ❤😊😊😊when can I start and how much is a page?
I don’t have it set up yet coming soon
Katrina are you going to start making heat transfers please let me know im just starting out
i working with a bigger version of this guy
if this machine have 2 suction fans in dryer you dont need waste this amount of material, just print and let it going forward enough, and put it on the first suction and turn it on, try it, thats easy, also if your dryer is not proper for doing this you need only stick your wasted pet film to your clean pet film and use it to pass the first parts
also if you want to print only single or two designs you can cut it and after powdering seperately put it into dryer with the help of front suction part
Love your machine...to keep from wasting material especially on small prints...take that peice that you cut off and wasted, tape it back to the roll and reverse feed through your oven and shaker...then tape it to your roll.
But other than that your doing great!!!!
Or if tour doing 1 inage at a time...dont run it through your shaker and dryer....cut it off and poqder it and shar it by hand ..then use your DTF oven.
You give us great how to set up all kind of machines.Are we going to be able to purchase DTF from you?
@@sharonbonner6687 yes I stated in the last 2 videos please watch at the end I talk about it while pressing
❤❤❤😊
Congrats on the new member 👏🏽 I'm not going to lie. It's a lot of wasted material. You might go through it fast 🙂. They should add a leader to the roll to feed through the machine so you don't start off wasting a lot. Can't wait to watch these videos 🤗👏🏽👏🏽👏🏽
Yeah that is gonna annoy me for sure. That’s crazy. I have to see what other people do
How fast or slow is it. Compared to others DTF
Congrats way to Go !! 🫡🫡
Happy new year 🎉