3.6.1.2 Packet Tracer - Skills Integration Challenge

Поделиться
HTML-код
  • Опубликовано: 29 ноя 2024

Комментарии • 35

  • @Alfredo412
    @Alfredo412 3 года назад

    You've helped me understand CCNA way better than any of my professors ever did...thanks so much!!

  • @dhenz1431
    @dhenz1431 5 лет назад +7

    awesome, good to know i wasn't the only one having connectivity issues. I watched your vid to double check my work and turns it you had the same ping results I did.

    • @alejandrogiraldo1
      @alejandrogiraldo1 5 лет назад +1

      me too, spend 30 mins trying to troubleshoot ospf, then i looked for the video to find out the issues is related to the ISP routers. Always great videos, very informative

    • @JTF0469
      @JTF0469 4 года назад +1

      I was able to do both pings in the Connectivity step. I think the issue might be when configuring GRE Tunneling in the video, he issues no shut commands on both routers in scope as the final commands before moving on to the next step. I didn't have to do this as my interfaces were already up. So issuing the no shut commands were not necessary and might be preventing the 2 pings from going thru successfully.

  • @ancutzick
    @ancutzick 5 лет назад +4

    I completed this lab and i have connectivity to dns server from all Pc’s. Thanx for video

    • @TechAcad
      @TechAcad  5 лет назад +1

      Thank you dear Frend.

  • @asccuns3362
    @asccuns3362 5 лет назад +13

    In the real world 100% + no successful ping = 0%
    To make pings work call the ISP to verify PPP/CHAP settings. :)
    I FOUND THE SOLUTION!!!! In this case the ISP username values in the instructions are incorrect, try using ISP2 and ISP3 instead of "ISP-2" and "ISP-3".
    I guess studying for CCNA is not difficult enough, pulling my hair out while troubleshooting packet tracer/GNS3 is just one of those things I'll have to learn to love.

  • @ozzieh8245
    @ozzieh8245 4 года назад +1

    Goodness me. I got all the right configs and still ended up with no connectivity, you saved me from breaking another window, thanks!

    • @TechAcad
      @TechAcad  4 года назад +1

      Thank you so much my dear Friend for your great support...

    • @ozzieh8245
      @ozzieh8245 4 года назад

      Tech Acad Can you pm me your contact details? Salam my brother

  • @xlolzeex8934
    @xlolzeex8934 5 лет назад +2

    Works, try to check static then dhcp option in PC's after DHCp configuration!

  • @denzjt18
    @denzjt18 4 года назад

    THANK YOU FOR THIS! I'VE LEARN A LOT FROM YOUR VIDEO!

    • @TechAcad
      @TechAcad  4 года назад

      Glad it was helpful!

  • @edbobadilla9487
    @edbobadilla9487 5 лет назад +1

    thank you so much my friend. You are awesome!

    • @TechAcad
      @TechAcad  5 лет назад

      Thank you so much my dear Friend for your great support...

  • @wwolfram33
    @wwolfram33 4 года назад +1

    Does not the GRE tunnel 10 need to be configured with an IP address as well? (I see the tunnel source and tunnel destination values set correctly).

  • @neoki75
    @neoki75 6 лет назад +1

    I completed this lab, getting 100% score, but serial interfaces conected to ISP-2 and ISP-3 were up/down. As result of this the tunnel is up/down, of course. It seems to me there´s some misunderstanding with PPP authentication. I did debug negotiation and showed that authentication was unsuccessful. I am lost as we cannot access the peers to check ppp.

  • @ACBHeeK
    @ACBHeeK 5 лет назад +1

    Bro, i loved this PT! thanks, and it was very challenging, through your help i recalled the dhcp and ssh commands =) anyway, surely my mistake, i advertised ospf networks for GRE tunnel using 10.1.1.1/30 and 10.1.1.2/30 instead of 10.1.1.0/30, as u did in the right way =) my pings were successful because of this error? xD

  • @LalGebi
    @LalGebi 6 лет назад +2

    is this Lab possible in GNS3 ?

  • @montserrath310
    @montserrath310 3 года назад

    Thank you so much!!

  • @khushwantrai6400
    @khushwantrai6400 6 лет назад +3

    you didnot do cmd (tunnel mode gre ip ) on HQ router . this could be the problem of not ping

    • @kazushi
      @kazushi 5 лет назад

      the tunneling mode gre ip is usually the default tunneling mode on cisco ios routers..

  • @nassylbekova
    @nassylbekova 4 года назад +1

    thank you!!!!

    • @TechAcad
      @TechAcad  4 года назад

      Thank you so much my dear Friend for your great support...

  • @mominkamal9483
    @mominkamal9483 4 года назад +1

    Hello dear, i have a problem accessing the material in my account in Netacad.. the modules are not showing as usual, there is no direct way to reach the support admins to ask for help, can you help with any solution?!

    • @TechAcad
      @TechAcad  4 года назад +1

      All resources are available in the website. Only make sure that the site is not in under Maintenance.

    • @mominkamal9483
      @mominkamal9483 4 года назад

      Its always under maintenance 😃
      Maybe its temporary..
      Anyways i completed the activity 100% and all PC can ping.. Thank you!

  • @goodneighbor4338
    @goodneighbor4338 5 лет назад

    as soon as i put ip address on HQ serial interface S0/0/0, interface protocol turn into down state ? what would be the problem ?

    • @TechAcad
      @TechAcad  5 лет назад

      Please configure the both end of the interface.

    • @goodneighbor4338
      @goodneighbor4338 5 лет назад

      @@TechAcad otherside is ISP side which is locked No CDP discovery Disabled but link lights are green ? Even if i copy paste whole configuration Challenge is 100% Complete But still cannot ping nodes.
      Please guide

  • @krupalpatel8990
    @krupalpatel8990 3 года назад

    I can not ping from pc2 to dns

    • @TechAcad
      @TechAcad  3 года назад

      You might done some misconfiguration. Please verify the configuration and correct it!