YALL NEED TO BE AWARE HOW GRATEFUL WE ALL ARE, THAT YALL TAKE YOUR TIME TO GET FOOTAGE OF ALL THESE DOPE ASS EVENTS. loved the rocky mountain race week coverage. Much appreciated! Keep it up 1320!!!! Much love from Indiana!
@@MRMOPARMAN0426 roll cage is illigal in aus so its hard to have a street car with a propper cage without having to pull your car apart every time you want to go to the track or get defected, i dont think he expected it to go so fast either it was his first hit ever in that car with that set up so who knows what he was expexting true
@@christhorney not true you can get a cage engineered as long as it meets the requirements of which ever state you live in and meets the engineers satisfaction.
@@5lcalais1 an engineer cert cost more than he prob spent on his engine, it's not a cheap process I don't know if you actually know anything about it but it's a bit easier in a 25+ year old car if you only want club reg but if you want proper rego then it needs to be designed by an engineer in cad, involves multiple inspections along the build process and even x-rays if you want chromoly. For most people it's not a feasible idea unless you know an approved engineer and can get a cracker deal it's going to cost you over 10k aud before you even add the cost of cage, I know because I have gotten quotes for my S13 and decided to just make it a dedicated track car because I can build the whole car for the cost of the cage, props to the little red ute what I'm talking about is the number one reason his cage is hidden imo because it's not engendered, it's race teched he said in the vid not engendered so ways around it if ya smart, it's tough to hide a cage so well in a Skyline tho. Plus I still don't think he though it would be so fast and prob has one in the pipeline cos that's crazy fast for a shakedown haha
@@christhorney well I can't speak for every but in qld , the transport dept. They have a guide/plans/design/restrictions On how the cage is to be constructed, and yes engineering is expensive and if we wanna play the game we gotta be prepared to pay the price unfortunately which is why my vn is a dedicated track car too I certainly can't afford to engineer it 😂 nor do I want too at least this way I don't have to compromise on anything. But if you can afford to build a 9 second gtr you can certainly afford the cage and the engineering 🤷♂️😂 u can't buy a stock r32 gtr under 40k anymore, he's essentially peddling a 100k car there if not more, he can certainly afford the safety equipment 🤔😂
Yutes rule! My dream Yute (a 67 El Camino) sits half finished as I battle cancer.(I had to sell the engine to pay medical bills). Seeing the ones you show here sure put a much needed smile on my face. I appreciate that you take the time to feature them.
It's so funny seeing drag strip officials jump like that. You'd think they'd be used to it since they hear it all day but there's always those one or two cars that have that extreme 2-step. lmao
@@conspiracyscholor7866 I've seen 9 second cars wreck and roll, and those crashes would be hard to survive without a cage. Tracks have insurance policies, and if kangaroo jack had killed himself out there, they'd be sued out of business. Guy needs a cage with a car that runs that fast.
Rule are rules, even though he didn't crash. They gotta stick to'em. Best off sticking with a dead road at night for no fees if not caught! Shit's more fun!
Texas Patriot I’m a regular at Sydney dragway. My s15 will run a 9.6. The trick is to do it on the last run of the night so you don’t get kicked out at the start
The Mazda Repu is the nicest I've seen and probably will ever see. You can tell he's a street racer/grudge match guy because he damn well knows how big that turbo is and it's not in the 80mm range that's for sure. That thing is the size of the 3 rotor that it's attached too lol. I wouldn't be surprised to see it run pretty deep into the 7's and on paper it could possibly go 6's with how light it is.
@@Flippin-mad You act like nobody has ever imported a JDM spec car/truck/ute to Australia lol...…. I guess the owner let him call it a Repu for the fun of it and it has a Repu front end and body panels for the hell of it too. We never got them in the States either but I had one imported from Japan and did a 13B with a 6spd swap before I sold it.So I think I can tell WTF it is by looking at it. The Datsun you speak of has front fenders that are more rounded and the Repu has slightly more squared off corners in case you want to pull your head out of your ass and go look at some pictures to learn the differences.
@@Flippin-mad I don't know a damn thing about pinball other than I used to spend days on my cousins Centaur machine. Didn't mean to be such a prick but youtube seems to bring out the troll in me. But it is a Mazda and not the Datsun ;-) The easiest way to tell is the Mazda's are a bit more squared off whereas the Datsun is a bit more rounded on the fenders.
That 20b set up is unreal! Super clean build. That turbo looked way bigger then an 88. Thought it’s was a 98 or 102. That truck is gonna move out! Can’t wait to see it make some hits
That's the kind of attention to detail I love to see! That red truck was WOW. Putting that much detail into a build in your backyard?! He could make a lot of money building for teams.
First time down a strip and pulls a 9.2 jesus the amount of adrenline pumping through him lol one of the most terrifying and exhilarating things hell ever experince 10/10 Wtf THATS a backyard build Jesus one hell of a backyard
No way its his first time going that fast. Most likely practiced in his neighborhood late at night. He knows how to run drag strip, that shit takes practices to run without fucking up so yeah, not his first time.
Dude there are a bunch of them available you just need to know where to look Stay away from both coastlines because that's where they go up to the 15 to $30,000 range If you find them in the Midwestern states like New Mexico and Utah and Montana you'll find a lot of owners that have no idea what they are!!!!!!!!!
@@shawnjones7512 I live in Seattle and I have a lot of friends that drive to strange States all the time to buy an R32 or R34 for $2000 to $5,000 I also see the right hand drives being brought in to the Seattle port, they cost between 3 and 5000 if you buy them in Japan, and then another three to five thousand to have them certified and sent over here! What's nice about those as they come with the big beefy turbo motor
@@shawnjones7512 FIRST POINT DONT CALL THEM R32 OR R34'S THATS WHERE THE PRICE JUMP COMES IN You should be looking for them by their stock manufacturer name because that'll tell you that the owner has no idea what it's worth!!!!!!!!!!!
Google 'Hemi 265 cid' It comes from the family of inline sixes developed in Australia with assistance from Mopar Stateside. The smaller brothers are 251 and 245 cid. The 265 with triple Weber carburettors and many factory performance parts netted a quarter mile run of 14.4 ET back in the early 1970s in a 'E49' Charger. This engine wasn't a 'Slant' but an entirely new design.
@@DStead2239 hemi sixes aren't slant sixes. Completely different motor, Aussie Valiants ceased having slants by 1970- except export cars to certain countries. 1970 onwards was the Hemi 6 which sat upright.
Man, Kyle, I used to dream about playing in the NFL, thinking that would the greatest job ever. Now that I’m a bit older, I KNOW, I’m jealous of your job. You have the greatest gig in the world, and you created it!! You didn’t go and look online for it, get a word from a friend, you built it from the ground up. Kudos, and thank you. Your job brings so much enjoyment to so many people from various walks of life. You should be nominated for a prestigious award, like a Nobel or just like 1320, create one lol
@Investor01 Be happy that someone is showing they even give a damn about TLDL. Lots of yanks had too come help with the barbie fire y'all fucking cried about.
Best racing coverage on the net hands down. Thanks for the awesome upload. Your guys do a hell of a job at showing us what we can’t see I person. Thank you again!! Love your channel!!
Thanks guys for the top fan stat on fb u guys r the best been watching 1320 since for ever can’t even remember love the content and keep up the amazing work
Thanks for showing off the Repo, that Rotor Engine was so under estimated when i was a Teen, i can remember helping a Neighbor in Houston Texas, Rebuild a Single Rotor, with Turbo, when Turbo's wasn't cool and nobody knew how to, no Computer, but this guy seen something none of us could, i think of him, every time i see the Rotor Racers?
Kyle, while you’re in Aussie land can you interview someone about the modification laws for street driving? What is allowed and what is prohibited. Like is it enforced throughout the country or is it municipality based? Is it strictly enforced? As an American we would definitely appreciate the insights and realize how lucky we are that vehicles like Leroy can cruise the streets. 😄
It would be interesting to see that and I'm Australian. The laws do differ a bit state to state AFAIK. I live in Victoria and modifying vehicles pretty much at all requires an engineers report to prove the mods are safe. None of the vehicles you see in these vids are legal. If they got pulled over they'd be fined and put off the road. If they were caught doing something naughty their cars could be impounded. Here is a line from Vic Roads vehicle modification regulations. "The catalytic convertor(s) must be retained in their original location and all exhaust gas must flow through the convertors at all times. Similarly any sensors positioned in the exhaust system as original equipment must be retained in their original locations." Exhaust extractors may only be fitted to vehicles without an engineer's report if the car was built before 1976 AND the extractor manufacturer can supply a certificate to prove the vehicle still complies with emission regulations. It's a joke, honestly the government here doesn't want us modifying cars at all. That's why we have to be smart about it.
@@johnwilson1794 yeah but they don't always adhere to that though, it's the same in qld for exhausts but I've never engineered any of my exhausts lol and never had an issue, but I'm in Vic still tryna get my head around their retarded laws 😂
Different laws by state. In S.A. a car model that never optionally had a turbo from new cannot be fitted aftermarket. Same for superchargers. But I can legally make a convertible from any car built before 1968 (lap sash seatbelt intro) in my backyard and it's not required to be inspected.
It makes me happy seeing them smiling while talking about what’s under the hood it’s really the little things in life I want to learn more so I can mod my car as well
Truck: commercial based vehicle. Ute: passenger car based vehicle, must be one piece body- no separate tray. First produced in Australia, known around the world but not necessarily by name.
158mph with no cage of course not. People working there are actually doing their jobs. It's only a matter of time before a moron wrecks with no cage in the United States and the track gets sued and then shut down over stupidity. I see many cars with nothing as far as safety equipment or cages and running 9s and faster. Fastest was 7.55 at 180+ just ridiculous.
Yeah you definitely need a cage at 140+ it's just stupid to try to get away with it you should be smart enough to realize that rule is for your own safety...
@@scootbmx01 not here yet but it always happens when this conversation comes up. Mostly from guys who most likely never been fast but say shit like it's their life they can do whatever they want. Sorry doesn't work that way.
He went to Puerto Rico and made a video but the only rotary in the video was an almost stock RX-7 :\ They didn't bring the rotaries to that event. He was even surprised there was a rotary car there, lol.
20b th400 with a 9 inch? That’s savage. Kyle please follow up with that dude. You also see liberties and lencos or t56style or based trans behind rotaries. I’d love to see that truck rolling. Very cool.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
That little red truck, while being way too small, had to be one of the cleanest builds I've seen! That cage was sick!
No doubt, slick, clean build. Extremely tight cage build, in looks and fit.
Does anyone know how to spell it? Repu?
I did my cage the same way and I love it.
@@andrewskaterrr I've never heard of it before.
cleanest build award for sure, that shit is sick
I hope that little red trucks owner has a youtube cause it was beyond clean. Especially that cage. HUGE props to the builders
Ute not s truck
@@TheCptawesum Mini truck
@@mikdonalds3956 It's a fuckin' ute ya bloody drongo.
Sold in Australia as a ute so no not mini truck
Shut the hell up. You guys sound like a bunch of toddlers. We call them trucks in the states.
YALL NEED TO BE AWARE HOW GRATEFUL WE ALL ARE, THAT YALL TAKE YOUR TIME TO GET FOOTAGE OF ALL THESE DOPE ASS EVENTS. loved the rocky mountain race week coverage. Much appreciated! Keep it up 1320!!!! Much love from Indiana!
It’s not like they are giving up their free time. This is a business. Just sayin’.
Devil’s Advocate lmfao
@@ThisGuyDrives right, 1320 just needs some love and appreciation!
@@ThisGuyDrives yes exactly..
Stfu
Well if you cant run your fast street car at the track without getting kicked out i guess you can always go back to street racing.
Or you could spend some money on the appropriate safety equipment.
@@MRMOPARMAN0426 roll cage is illigal in aus so its hard to have a street car with a propper cage without having to pull your car apart every time you want to go to the track or get defected, i dont think he expected it to go so fast either it was his first hit ever in that car with that set up so who knows what he was expexting true
@@christhorney not true you can get a cage engineered as long as it meets the requirements of which ever state you live in and meets the engineers satisfaction.
@@5lcalais1 an engineer cert cost more than he prob spent on his engine, it's not a cheap process I don't know if you actually know anything about it but it's a bit easier in a 25+ year old car if you only want club reg but if you want proper rego then it needs to be designed by an engineer in cad, involves multiple inspections along the build process and even x-rays if you want chromoly. For most people it's not a feasible idea unless you know an approved engineer and can get a cracker deal it's going to cost you over 10k aud before you even add the cost of cage, I know because I have gotten quotes for my S13 and decided to just make it a dedicated track car because I can build the whole car for the cost of the cage, props to the little red ute what I'm talking about is the number one reason his cage is hidden imo because it's not engendered, it's race teched he said in the vid not engendered so ways around it if ya smart, it's tough to hide a cage so well in a Skyline tho. Plus I still don't think he though it would be so fast and prob has one in the pipeline cos that's crazy fast for a shakedown haha
@@christhorney well I can't speak for every but in qld , the transport dept. They have a guide/plans/design/restrictions On how the cage is to be constructed, and yes engineering is expensive and if we wanna play the game we gotta be prepared to pay the price unfortunately which is why my vn is a dedicated track car too I certainly can't afford to engineer it 😂 nor do I want too at least this way I don't have to compromise on anything. But if you can afford to build a 9 second gtr you can certainly afford the cage and the engineering 🤷♂️😂 u can't buy a stock r32 gtr under 40k anymore, he's essentially peddling a 100k car there if not more, he can certainly afford the safety equipment 🤔😂
6:25 when your turbo is larger than you engine
Jesus Christ.
How to blow up an engine
there's an engine attached to that turbo
I love the coverage of what the ausies are getting up to down under. Always see something amazing.
that r32 was sooo rowdy, that backfire on the upshift was sick
Ifkr! Fckn hell!
Any time I hear an Australian speak I feel like some rowdy shit is going to go down.
Yeah sounds about right.
Shit gets pretty hectic in Bankstown yo
It usually does!
Ken Oath
fuckin kangaroo fights after the races mate
Yutes rule! My dream Yute (a 67 El Camino) sits half finished as I battle cancer.(I had to sell the engine to pay medical bills). Seeing the ones you show here sure put a much needed smile on my face. I appreciate that you take the time to feature them.
Ute, mate, ute! Short for utility.
The poor track lady @4:50 wasn't ready hahaha
She loved it tho
What size is your turbo?? ...Um good question ...LMFAO
Beach Ball size turbo
"How big is your turbo?"
"Yes."
Such a humble guy :D Builds an epic car and says "we...just..built it umm" JUST BUILT IT? Some serious craftsmanship right there
He was probably not the one who put it in lol
That turbo looked like megatrons hand cannon. Good gawd.
1320 Video, one of the rare American channels that flat out respects the foreign land they are in. Nice to see.
Totally agree, great to see a fella appreciate the local stuff.
That's not true
Except for the: "what's that in pounds?" Dude just learn a conversion.
@@nerfinator03 well he said do you know what that is in pounds so it seemed to be like if he conveniently knew
@@calebfoster4855 Yea I sound kind of like an asshole in that comment, must not have been my day...
I'm glad this guys learning our car models and everything.
Hahaha omg the girl reaction at 4:51 😂😂
You win the comment section today
@@1320video 🙏🙏
It's so funny seeing drag strip officials jump like that. You'd think they'd be used to it since they hear it all day but there's always those one or two cars that have that extreme 2-step. lmao
Them rbs don't play no games
Hope they put a cage in and run again, I want to see it go better!
“Who built it”? Oh just some back yard stuff you know, super clean and well built!!!!!! Congrats 🍾
Exactly. So humble not even realizing he has a diamond in the rough!
@@ChurchBoy0487 In the rough? Looks like a cut diamond to me!
"going too fast" on a drag strip LOL
Whole world's gonna be bubble wrapped by 2035.
@@conspiracyscholor7866 I've seen 9 second cars wreck and roll, and those crashes would be hard to survive without a cage. Tracks have insurance policies, and if kangaroo jack had killed himself out there, they'd be sued out of business.
Guy needs a cage with a car that runs that fast.
Rule are rules, even though he didn't crash. They gotta stick to'em. Best off sticking with a dead road at night for no fees if not caught! Shit's more fun!
Texas Patriot I’m a regular at Sydney dragway. My s15 will run a 9.6. The trick is to do it on the last run of the night so you don’t get kicked out at the start
@Texas Patriot yes. too fast without a roll cage. not in general. i want to see you scraping someone off the asphalt who just pulled a meat-crayon.
The Mazda Repu is the nicest I've seen and probably will ever see. You can tell he's a street racer/grudge match guy because he damn well knows how big that turbo is and it's not in the 80mm range that's for sure. That thing is the size of the 3 rotor that it's attached too lol. I wouldn't be surprised to see it run pretty deep into the 7's and on paper it could possibly go 6's with how light it is.
It's not a repu it's a datsun 1200 Ute.
We never got the RE pick up here in Australia
@@Flippin-mad You act like nobody has ever imported a JDM spec car/truck/ute to Australia lol...…. I guess the owner let him call it a Repu for the fun of it and it has a Repu front end and body panels for the hell of it too. We never got them in the States either but I had one imported from Japan and did a 13B with a 6spd swap before I sold it.So I think I can tell WTF it is by looking at it. The Datsun you speak of has front fenders that are more rounded and the Repu has slightly more squared off corners in case you want to pull your head out of your ass and go look at some pictures to learn the differences.
Its a fucking datsun ffs.
@@live4bass1 it's what I thought too. This is why I don't comment on stuff. If It was a pinball I'd know %100 hahaha
@@Flippin-mad I don't know a damn thing about pinball other than I used to spend days on my cousins Centaur machine. Didn't mean to be such a prick but youtube seems to bring out the troll in me. But it is a Mazda and not the Datsun ;-) The easiest way to tell is the Mazda's are a bit more squared off whereas the Datsun is a bit more rounded on the fenders.
That 20b set up is unreal! Super clean build. That turbo looked way bigger then an 88. Thought it’s was a 98 or 102. That truck is gonna move out! Can’t wait to see it make some hits
That gtr sent that GTI to gapplebees with a gift card 😂😂😂😂😂
its almost like it costs 100k more dollars than the gti 😧
That red ute is absolutely beautiful. Amazing cage work. Such a clean build.
The red 3 rotor ute is stunning
Just watched again that three rotor is so swert thanks again 1320video
Daniel Sumner Clean asf
datsun 1200 ute
@@mracidman2536 i could be mistaken pretty sure he said a repu, which is mazda
@@RawrlmaBear the truck that they were looking at is a Nissan Datsun 1200 UTE
That's the kind of attention to detail I love to see! That red truck was WOW. Putting that much detail into a build in your backyard?! He could make a lot of money building for teams.
First time down a strip and pulls a 9.2 jesus the amount of adrenline pumping through him lol one of the most terrifying and exhilarating things hell ever experince 10/10
Wtf THATS a backyard build Jesus one hell of a backyard
Right lmao i said the same exact thing lol
No way its his first time going that fast. Most likely practiced in his neighborhood late at night. He knows how to run drag strip, that shit takes practices to run without fucking up so yeah, not his first time.
I naturally thought he meant first time for the car down a dragstrip- not himself.
@@sparda9060 hey man some cars are so ppwered by computers they can make anyone look good butni get your point
@@rossbrumby1957 either way terrifying experience wether it be a humans dirst time going that fast or a cars first full rip
Love the little datto ute. Never thought a 20b would fit so nicely in one
I love Aussie's our brothers in arms!
Aussies rock. Love the builds down under. I wish we could get the R33s & R34s like that in the states
@Ron F i think the R34 cant come until 2024. I may be mistaken though
Dude there are a bunch of them available you just need to know where to look
Stay away from both coastlines because that's where they go up to the 15 to $30,000 range
If you find them in the Midwestern states like New Mexico and Utah and Montana you'll find a lot of owners that have no idea what they are!!!!!!!!!
Richard Wolfe good point. If someone knows what they have they can jack the price up
@@shawnjones7512
I live in Seattle and I have a lot of friends that drive to strange States all the time to buy an R32 or R34 for $2000 to $5,000
I also see the right hand drives being brought in to the Seattle port, they cost between 3 and 5000 if you buy them in Japan, and then another three to five thousand to have them certified and sent over here!
What's nice about those as they come with the big beefy turbo motor
@@shawnjones7512
FIRST POINT
DONT CALL THEM R32 OR R34'S
THATS WHERE THE PRICE JUMP COMES IN
You should be looking for them by their stock manufacturer name because that'll tell you that the owner has no idea what it's worth!!!!!!!!!!!
I think a better video title would be "He ran a 9 second pass on his first ever run"
Agreed its pretty much standard procedure to remove a vehicle that is not equipped for its time bracket.
Absolutely.
As usual.......1320 CREW going above and beyond to bring us footage from around the world.... BEST RACING RUclips CHANNEL, PERIOD. 😎
That Ute is a Beaut! Never seen or heard a straight 6 like that one let alone the pass he made!
You should look into Barra engines then. We import them into the states.
You call em slant six in the states. They're are mopar engine, called slope 6's here and were 245ci or 265ci
Google 'Hemi 265 cid' It comes from the family of inline sixes developed in Australia with assistance from Mopar Stateside. The smaller brothers are 251 and 245 cid. The 265 with triple Weber carburettors and many factory performance parts netted a quarter mile run of 14.4 ET back in the early 1970s in a 'E49' Charger. This engine wasn't a 'Slant' but an entirely new design.
@@rodpalmer4652 you mean 215? yeah, they were all nicknamed sloppers here like slant because of the angle they are mounted at.
@@DStead2239 hemi sixes aren't slant sixes. Completely different motor, Aussie Valiants ceased having slants by 1970- except export cars to certain countries. 1970 onwards was the Hemi 6 which sat upright.
Great vid but for me the highlight was at 58 seconds in, my tow truck. Thank god I washed it, never know who’s watching haha
0:58 for lazy
Lol
I watched the whole video with a smile on my face! Love your work man, glad to see you down under again👍🏾👌🏾
the sound of that R32was amazing
Man, Kyle, I used to dream about playing in the NFL, thinking that would the greatest job ever. Now that I’m a bit older, I KNOW, I’m jealous of your job. You have the greatest gig in the world, and you created it!! You didn’t go and look online for it, get a word from a friend, you built it from the ground up. Kudos, and thank you. Your job brings so much enjoyment to so many people from various walks of life. You should be nominated for a prestigious award, like a Nobel or just like 1320, create one lol
Cool clips, love the big burn out finish.
That REPU ute is just a thing of beauty !!!!! 11/10 build!
Datsun 1200 ute
chisel83 true RHD should have been a give away
That’s what happens when you max out your GTR
I experienced this on Forza
Lol forza
😫🤣🤣🤣
They kick you out for not having a cage on Forza? Damn bro.
Dead 🤣
@3 name changes allowed every 90 days. dunno how i ruined it shouldn't you be watching ur asmr videos you keyboard warrior
That repu was crazy clean props to the guys who built it, owner was such a nice polite dude too
By far the best channel ever made 1320 for life ✌️🤙✌️
I love it when the turbo is nearly as big as the engine. That 3-rotor Mazda is pretty cool. I'd like to see it fully tuned up and running for real.
Tech was right for kicking him out. We've seen plenty of examples on this channel where having a cage has saved someone.
Well done Kyle! As an Aussie I always love your Aus content. Make sure you do get back to show the worldvthat 3 rotor 1200 ute running!
Hi fellas the red ute is a datto 1200 not a mazda repu 🤙🤙
The owner didn't even know what he had.😂
I don't understand. Is datto another was to say Datsun? No it's a Nissan with a Mazda engine?
well , the front grille fooled me , more like the badge on it did 😄
It’s a B120 for the yankee viewers. Pick up version of the B110.
@Ray Be kind to others, it goes a long way its a japanese truck not austrailian and we got a datsun 620 which is basically american model
Can we take a moment to notice at 4:52 the girl in the back, the smile from the pops. This is why we love cars.
Good stuff from Down Under! "Now, this is a knife!" Great video keep'em coming!
@Investor01 Be happy that someone is showing they even give a damn about TLDL. Lots of yanks had too come help with the barbie fire y'all fucking cried about.
Un couteau ça?
ÇA c'est un couteau fils!
-Crocodile Dundee 1986
That little red truck is F’ing clean!!!😍
4:52
That girl in the background 😂😂😂😂
I'm dying 😂
What?
Best racing coverage on the net hands down. Thanks for the awesome upload. Your guys do a hell of a job at showing us what we can’t see I person. Thank you again!! Love your channel!!
2:04 You should warn a brother when you're going to do a jumpscare
I can't wait to see that REPU in action! Hands down the cleanest race machine i've ever seen. Still can't get over that cage.
I like how you've just decided that one time slip is important since you've zoomed in on just one end time on half of these runs
Honestly, I hate most track rules but this is one of the few I agree with. This one actually saves lives.
I love it when people put motors on turbos 😍💓😂
Hats off to the red truck builder. Nice work
"how did he do that!?" uhh lots of money and awd lol. You see how stable that thing was?
That REPU was sooo awesome!! What an epic build!
That Datto ute is GANGSTA af! Owner humble as
Power to weight Quality of the cage even the exhaust ... ... ... Hats off man.
Love the vids !! The red lil truck is a Datsun 1200 or Datsun Sunny 😊
1200
Ute
got one in the build at the moment, exact same car different colour
TheCptawesum yeah Ute or truck I’m from the states we call them trucks sadly we don’t have those Datsun planning on importing one tho
@@dylanavelino5573 we got the 620 which is just basically an american version
loving both the orange valiant ute and red roadstar ute. awesome vid boys!
That 3 rotor truck is sick!! Hell of a build.👍
I miss living in the Gold Coast. Awesome cars everywhere. Aussies had some crazy builds there.
Good to see a Chrysler Valiant ute for once
American professional petrolhead in Australia "Ute with a HEMI- that a V6?" Obviously not a Mopar guy.....
That 20B Dato is cleannnnnnnnnnnnnn. Nice job mate
I want one of those little Aussie pick ups. Very dope.
@@oldtin82 it's. Mazda repu
@@oldtin82 well that's what was said in the video k could be wrong
It's definitely a mazda.
Thanks guys for the top fan stat on fb u guys r the best been watching 1320 since for ever can’t even remember love the content and keep up the amazing work
Damn the turbos bigger than the motor
That red truck was dope i usually don't like rotor engines that much but man he did it right
Hemi-6 Valiant Ute... So much WANT!!!
Little repu is so clean. Love the hidden cage look.
Should have shown more of the 265 Valiant VJ ute
A peek under the bonnet would've done..
Go the mighty Mopar
that lil red truck was superb👌. nicest truck ive ever seen. that thing is gonna run 6s.
The Aussies really know how to do things
Thanks for showing off the Repo, that Rotor Engine was so under estimated when i was a Teen, i can remember helping a Neighbor in Houston Texas, Rebuild a Single Rotor, with Turbo, when Turbo's wasn't cool and nobody knew how to, no Computer, but this guy seen something none of us could, i think of him, every time i see the Rotor Racers?
Not a Repo, It's a Datsun 1200 ute.
1st run, and pulls a 9.2 😂🤣😂🤣
That is fast!!
I had to look up that little red truck. Too cool and awesome build by far.
"Yaya stock ecu, yaya 1100hp, yaya turned it up a bit" why are these Australians so freaking friendly hahaba
Because we are chill. Thats why.LOL.
Thats the way we rockem in PR. perfect build 💪👍
I agree Kyle lil red was a bad dude👍
Kyle, while you’re in Aussie land can you interview someone about the modification laws for street driving? What is allowed and what is prohibited. Like is it enforced throughout the country or is it municipality based? Is it strictly enforced? As an American we would definitely appreciate the insights and realize how lucky we are that vehicles like Leroy can cruise the streets. 😄
He's not here anymore lol this was filmed about a month ago. I can give you some insight but ah later I gotta go to work 👍
It would be interesting to see that and I'm Australian. The laws do differ a bit state to state AFAIK.
I live in Victoria and modifying vehicles pretty much at all requires an engineers report to prove the mods are safe. None of the vehicles you see in these vids are legal. If they got pulled over they'd be fined and put off the road. If they were caught doing something naughty their cars could be impounded. Here is a line from Vic Roads vehicle modification regulations.
"The catalytic convertor(s) must be retained in their original location and all exhaust gas must flow through the convertors at all times. Similarly any sensors positioned in the exhaust system as original equipment must be retained in their original locations."
Exhaust extractors may only be fitted to vehicles without an engineer's report if the car was built before 1976 AND the extractor manufacturer can supply a certificate to prove the vehicle still complies with emission regulations.
It's a joke, honestly the government here doesn't want us modifying cars at all. That's why we have to be smart about it.
@@johnwilson1794 yeah but they don't always adhere to that though, it's the same in qld for exhausts but I've never engineered any of my exhausts lol and never had an issue, but I'm in Vic still tryna get my head around their retarded laws 😂
Different laws by state. In S.A. a car model that never optionally had a turbo from new cannot be fitted aftermarket. Same for superchargers. But I can legally make a convertible from any car built before 1968 (lap sash seatbelt intro) in my backyard and it's not required to be inspected.
STRAIGHT SIX WITH A TURBO IS NOT TO BE FUCED WITH.. THE MOST BALANCE ENGINE EVER MADE.
They are impressive, but not the best. Blown big block v8 on alchohol is the true master of all
@@dookiebooger9967 how many blown v8's are at the top of any street class?
One of. Boxer 6, V12, to name the most common types.
Ive never been into drag, but these videos have been pretty entertaining
265 valiant 6 one of the quickest 6 ever made
Can't believe old mate from motive dvd had to think about it before answering the question
@@TheCptawesum Hehehe you noticed that to lol
@@deanharris9375 bet if it was a audi he'd be all over it saying how fast it is
@@TheCptawesum Hehehe
with the triple webers of course
It makes me happy seeing them smiling while talking about what’s under the hood it’s really the little things in life I want to learn more so I can mod my car as well
That silver wagon 🔭👀
That red truck is something different 💯🤙🏽 I like it😬
maaan these ads are killing me, now we got 2 like 1 wasn’t enough... anyways, great video boiz! as always👍
These Aussie cars are clean show and still go!
You Sir live the fu**n life, Getting paid to go to BADASS car meets. Can't beat that brother..
#LVNTHADREAM
Those Yutes are SOOO sick!
I REALLY wish I could buy one here in the states!!!!
Ford Ranchero, Chevy El Camino. Same thing.
@@RyanTheMalamute are they really?
@@iantaylor95 same basic vehicle style (sedan with a bed) but not the same car at all
@@iantaylor95 the white a a Holden ute
A Ute is any utility vehicle including all pickups
No views club where you at?!
You where the first comment
@@johnhilton8838 y tho
Because the first comment shit it lame as fk
Franks Ute is insane. The amount of work put into it.... DANG! GJ Frank!
Love how people are calling it a truck lol. It's a Datsun 1200 ute.
Truck = states, Ute = down under.
Truck: commercial based vehicle. Ute: passenger car based vehicle, must be one piece body- no separate tray. First produced in Australia, known around the world but not necessarily by name.
Its a Mazda, by the way.
@@rossbrumby1957 It's a 1200 Ute, it's just got a rotary badge on the grille.
@@rossbrumby1957 It's a Datto man. I built four of them from ute, sedan and coupe plus a 1000 coupe.
That red truck is godly!
4:50 those guys in the back are gonna need neckbraces
Always love seeing a Holden.
158mph with no cage of course not. People working there are actually doing their jobs.
It's only a matter of time before a moron wrecks with no cage in the United States and the track gets sued and then shut down over stupidity. I see many cars with nothing as far as safety equipment or cages and running 9s and faster. Fastest was 7.55 at 180+ just ridiculous.
Yeah you definitely need a cage at 140+ it's just stupid to try to get away with it you should be smart enough to realize that rule is for your own safety...
I don't think anyone was complaining
@@scootbmx01 not here yet but it always happens when this conversation comes up. Mostly from guys who most likely never been fast but say shit like it's their life they can do whatever they want. Sorry doesn't work that way.
@@scootbmx01 the guy was complaining in the video at first
@@Johnny-tq9no no he wasn't. You can tell they were shit stirring when the tech was at the car.
So beautiful that red car with the rotory. Is big in Puerto Rico...my island
He say no that many 3 rotors u go to Puerto Rico and they are everywhere all Types of rotarys swapped in cars
Puerto Ricans sure like their Rotarys!
He went to Puerto Rico and made a video but the only rotary in the video was an almost stock RX-7 :\
They didn't bring the rotaries to that event. He was even surprised there was a rotary car there, lol.
Man I live in Puerto Rico the only thing u see in events are rotorys so u can’t tell me there arentthat many just because they didn’t go to the event
20b th400 with a 9 inch? That’s savage. Kyle please follow up with that dude. You also see liberties and lencos or t56style or based trans behind rotaries. I’d love to see that truck rolling. Very cool.
Ol 20b counting them off.
Just saw your dislike wow 70 really boring people. 💪
William Romero 497 dislikes now