Hi,The dust-removal service door is under the model sheet sticker and a transparent foil. The square-shaped door has a gap on one edge. It can be popped out with a flat-head screwdriver. The cleaning procedure is similar to that of other projectors.😎💣🆒💀 Thank you very much.
@@idkwhattoputhere8832on the side of the projector is a black label says model, power, lamp. Remove the label (use hair dryer or such and a blade to lift it carefully) then under that label is a small door you can open as described to blow air in to clean dust off
Amigo una pregunta, Si el LED del proyector se funde o deja de funcionar, es posible reemplazar por un LED nuevo o ya no se puede hacer nada? Saludos desde Colombia 🇨🇴👍🏻
great video, ill give it a try. Just in a few days it has now crazy dust. When the screen is white. would be great i we could look for a mod to make it better against dust :) At the moment maybe is better to leave the case without the screws and clean it weekly haha
Does blowing up the dust clean it completely? I didn't wanna open all the way and remove the lens, just blow like u did. Does it clean everything? Also, i don't have a blower like yours. Can a use a hairdryer instead?
@@binealex well not a slower one but one with less friction like a small noctua, i feel like the one i've got in my projector makes a little bit more noise than just the air blowing
Is it in all HY320 units, with a few days, there’s dust inside? I see dust on the projection and even cleaning the lens. Still there. I’ve acquired 2 units and the same issue. What about other projectors? Is this issue I’m describing happens to all hy320?
In my practice, the problem with dust occurs very often in cheap projectors; I find dust in the completely new hy320 and hy300, or it appears during operation. Cheap projectors are not very protected from dust, and if the room is dusty, then unfortunately you will have to clean the projector from time to time, this cannot be avoided.
A questão e que esses projetores tem mais de uma lente e esse sugador aí se tiver poeira empregada naqueles fresados das lentes transparentes de grau não limpa.
Meu hy320 diz que 'warning fan not spinning and about to shut down' quando aparece essa messagem ele desliga mas o fan funciona normal assim que ligo ele, Fiquei pensando que o cpu dele esquenta muito e acaba daninficando . Bom aparelho com erros de projeto 😢😢😢com muito aquecimento economia desnecessária
Hi,The dust-removal service door is under the model sheet sticker and a transparent foil. The square-shaped door has a gap on one edge. It can be popped out with a flat-head screwdriver. The cleaning procedure is similar to that of other projectors.😎💣🆒💀
Thank you very much.
Thats exactly what i was thinking… but can we blow some air through that door so it will clean the dust and spots in the projector???
I cant find it please make a tutorial video
@@idkwhattoputhere8832on the side of the projector is a black label says model, power, lamp. Remove the label (use hair dryer or such and a blade to lift it carefully) then under that label is a small door you can open as described to blow air in to clean dust off
@@idkwhattoputhere8832 Tutorial video:ruclips.net/video/YFJeweEvgfo/видео.htmlfeature=shared
@@idkwhattoputhere8832 Tutorial video:ruclips.net/video/YFJeweEvgfo/видео.htmlfeature=shared
Great video! Quick, practical, and straight to the point!🎉🎉🎉
Thanks for your comment 🤝
Amigo una pregunta,
Si el LED del proyector se funde o deja de funcionar, es posible reemplazar por un LED nuevo o ya no se puede hacer nada?
Saludos desde Colombia 🇨🇴👍🏻
Hi friend, if you find exactly the same LED, you can replace it with a new one 🤝👍
@@binealex cual son las características del led de este proyector HY320, puedes decirme?
great video, ill give it a try. Just in a few days it has now crazy dust. When the screen is white.
would be great i we could look for a mod to make it better against dust :)
At the moment maybe is better to leave the case without the screws and clean it weekly haha
It's a good idea, to leave it without screws👍😅
You are greatest!
Thank you for your comment👍🤝
Does blowing up the dust clean it completely? I didn't wanna open all the way and remove the lens, just blow like u did. Does it clean everything? Also, i don't have a blower like yours. Can a use a hairdryer instead?
Yes, the dust blows off completely, I recommend you buy compressed air in a can, it will be the best option.
It looks complicated like opening a car engine.... What is the name of the tool you used to clean the dust? Where to buy it?
Used a small vacuum cleaner
Would you say that the fan is fairly easy to access? I'm thinking about changing it for a more silent one
If it's quieter, it's a low-power fan, so it will not cool well, and the projector may break
@@binealex well not a slower one but one with less friction like a small noctua, i feel like the one i've got in my projector makes a little bit more noise than just the air blowing
very good
🤝👍👍
Is it in all HY320 units, with a few days, there’s dust inside? I see dust on the projection and even cleaning the lens. Still there. I’ve acquired 2 units and the same issue. What about other projectors? Is this issue I’m describing happens to all hy320?
In my practice, the problem with dust occurs very often in cheap projectors; I find dust in the completely new hy320 and hy300, or it appears during operation. Cheap projectors are not very protected from dust, and if the room is dusty, then unfortunately you will have to clean the projector from time to time, this cannot be avoided.
A questão e que esses projetores tem mais de uma lente e esse sugador aí se tiver poeira empregada naqueles fresados das lentes transparentes de grau não limpa.
any advice on how to change the fan for a more quieter one please?
This fan is designed by the manufacturer, Yes, it is very loud.
For example, in the Hongtop p30 projector, the fan is very quiet.
Be interesting to maybe have a go at doing something with the fan in this? as everything else about this projector is pretty good
К сожалению, не помогло... Но спасибо за обзор
What's the purpose of that little rectangular thingy that receives the connection of that 3-color wiring cable right next to the focus adjust wheel?
This is an External IR receiver for the remote control
@@binealex Thanks, I was courious because if I'm not mistaken the older Hy300 has the IR sensor on the back
@@stereobrowser No :), it is located exactly the same on the front left as in the model hy320
I have this little projector in the bedroom, and the amount of dust it manages to collect in mere days is crazy. Its freaking annoying.
Unfortunately this is one of the disadvantages of cheap projectors :(
Meu hy320 diz que 'warning fan not spinning and about to shut down' quando aparece essa messagem ele desliga mas o fan funciona normal assim que ligo ele,
Fiquei pensando que o cpu dele esquenta muito e acaba daninficando . Bom aparelho com erros de projeto 😢😢😢com muito aquecimento economia desnecessária
You can just open the little door on the side below the sticker
You can't clean the projector 100% through the window, you still need to disassemble it
Will this alos fix screen buring with just a wipe?
If there is dust, you can wipe it off
Hello. I received my hy320, and after only half an hour the spots appeared. Can they be removed?
Hello, yes, you can.
@@binealex How? is it with this procedure or?
A solucao melhor seria achar um meio de diminuir a temperatura e colocar melhores filtros na entrada de ar.
👍👍👍
0:52 it’s already opened
It’s not that simple
Yes, but it is possible
👌
I came here to see the removal of dust from the inside of the glass and was disappointed to not see that
ruclips.net/video/riaUN3LL3rg/видео.htmlsi=KIwYu6Hms7Ari4Yc