Only seen these videos now man love the bike would love to do something like this how much roughly would something like this cost to do and would u need to be experienced to take it on?? Great videos subbed 😃
Hey, did you find out whats wrong with the starting issue? I have the same problem. I cleaned the carb and changed spark plug & ignition coil. And itll start but die right after . Thanks!
looks like you have a different issue than i do. Mine was just a bad ground on the rear of the harness. Yours sounds like more of a fueling issue. Check to see if your fuel pump is working.
So the genuine honda engine couldn't be built for more power why put a china engine on a Japanese bike .......not saying there is anything wrong with the gy6 engines just wondering
The gy6 can be brought out all the way to 232cc with the right cases, and even with an untouched long block 150cc w/ bolt ons can go significantly faster than the stock get engine. With a radically modified get it's still slower.
Ola sou do brasil eu gostaria de saber qual honda voce utilizou seria uma honda lead. Hello, I'm from Brazil, I would like to know which honda you used would be a honda lead
i dont know..i could be wrong but i remember when i was tyre fitting that tyres that had V pattern tread the V was fitted to run centre point forward...i think this was for water dispersal with car tyres...however its possible this is different for bike tyres...you have done a good job with the build by the way..
Is there anyone that can help me? Im desperate at this point. My GY6 scooter does not want to crank. I put in brand new battery after brand new battery but the scooter drains it when I try to crank it and drains it when its not even on. But if there is anyone that can help me contact me through youtube. Please and thank you.
Cool story man. At my altitude its Impossible to reach 50+ kph on the GET. This is a completely stock GY6. Big bore and other mods ill be way past 100.
Noticed a license plate bracket that cclamshelled around the rear frame. I have beeen liking for one. Can you tell me where to buy one???
Love your style. Subbed and I really hope you make some more ruckus vids. This scooter scene is about to blow up
the ruckus is looking beautiful
This turned out really cool, sweet little bike
Is that Honda ruckus fully automatic or does it have a clutch and gears?
Only seen these videos now man love the bike would love to do something like this how much roughly would something like this cost to do and would u need to be experienced to take it on?? Great videos subbed 😃
Dervan Parkinson im about 6 grand into it. They’re extremely easy to work on. Thanks for the sub!
Yo the ruckus is looking good!
thanks man! hopefully be out at meets this week!
Hey, did you find out whats wrong with the starting issue? I have the same problem. I cleaned the carb and changed spark plug & ignition coil. And itll start but die right after . Thanks!
looks like you have a different issue than i do. Mine was just a bad ground on the rear of the harness. Yours sounds like more of a fueling issue. Check to see if your fuel pump is working.
Danny Donaldson Photography thanks for the fast reply. Maybe its my pump because the fuel would drain back into the tank from the carb.
Vee Cruz did you remember to re use the check valve from your original engine? If not that’s 100% your problem.
Danny Donaldson Photography ohhhh right! Well it started today, but only as i put my hand on the air filter.
Just found your channel and I subbed! Im about to start my Metruck build here in hawaii. Are you in Canada?
fantastic! theyre s ton of fun to build. Yup I'm up in canada! The great white north.
Any place here in the islands to buy a new gy6 150cc engine?
You have a link to the rear wheel? Pls and ty.
scootertuning
Ruckus are fun.
Bike looks great! Are you going to the event the weekend of Aug 4th?
which event is this?
facebook.com/events/116522965601475/?hc_location=ufi
ah interesting i might check this out.
Love that retro look 👍
Lol forgot to mention I'll be moving to Ontario in 2018. You anywhere near Sauga?
Apex Hamma I'm to the west in Calgary!
About how much have you spent on this build?
in the gy6 swap total bill was bout 2600ish.
At 5:30 when I see the plug in the exhaust
So the genuine honda engine couldn't be built for more power why put a china engine on a Japanese bike .......not saying there is anything wrong with the gy6 engines just wondering
The gy6 can be brought out all the way to 232cc with the right cases, and even with an untouched long block 150cc w/ bolt ons can go significantly faster than the stock get engine. With a radically modified get it's still slower.
Did you have to change your front shocks?
Nice build looks good!
thanks !!
So which length did you end up using? 8? 9? 12?
Robert Cominos ended up going with the 10 inch :)
Ahh damn my wife and I just left Banff!! Was there for 3 months
Do you have a parts list you can email me?
Ola sou do brasil eu gostaria de saber qual honda voce utilizou seria uma honda lead.
Hello, I'm from Brazil, I would like to know which honda you used would be a honda lead
ruckus in the US,zoomer everywhere else
Damm bro that looks so amazing
whatsthe frint can for?
This thing is so sick. hahaha i love it
Small Engines Velocity has a Facebook Ruckus group. Join up.
What's that sliver piece called on the rear of the seat
XL Boys it’s a plate holder from the ruck shop, but I relocated the plate
Danny Donaldson Photography thx man going have a ruckus built coming soon
im pretty sure the way your front tyre has been fitted here it will be running in the wrong direction
ill double check tonight thanks! i remember telling the shop to make sure it was on the right way lol.
i dont know..i could be wrong but i remember when i was tyre fitting that tyres that had V pattern tread the V was fitted to run centre point forward...i think this was for water dispersal with car tyres...however its possible this is different for bike tyres...you have done a good job with the build by the way..
Where did you buy your ruckus frame from
buy the frame? its just a standard oem ruckus frame.
So I can go to the Honda website buy a frame?
I dont think you can buy just a frame.
ok what year is your bike?
was an 03
Ruck looks good just reminds me of Minty2 too much.
Is there anyone that can help me? Im desperate at this point. My GY6 scooter does not want to crank. I put in brand new battery after brand new battery but the scooter drains it when I try to crank it and drains it when its not even on. But if there is anyone that can help me contact me through youtube. Please and thank you.
Think those parts would work for a ruckus clone
please do not buy a clone...
How much money the swap cost you
BoKwo just over 2k cad
does it ground out on corners
nope. never did
Um anyone say anything about the slammed Audi in the background
NICE BIKE
Damn you look like Seth McFarlane.
Bro your muffler plug is on
el3men207 gaming hahahha ikr
Are stretched scooters hard to ride
Wayne Hall not at all!
Hooking up gy6 to my buggy. Wish I could borrow your brain
whats the top speed
topping out at about 90 right now.
Got a list of your setup? How you got it to hit 90mph
i think he meant 90 kmh
are you... Cilomadian?
Nice
Lol - "plug and play"
The term you're looking for is "bolt on"
last time i checked you dont bolt a harness to a car. you plug it in and press go.
Why do you like Audi cars? 😂😂
WHY>>>???? "FAST"? OK fast for a 150CC scooter, which slow compared to almost any motorcycle.
Really? i never would have guessed that bigger engines in motorcycles make them go faster. SMH lol
My POINT! A fast 150cc GY6 scooter is SLOW..... anything can beat the snot out of it. They were never intended to be fast. Cheers.. LOL!
only 88kph my 50cc can do that
Cool story man. At my altitude its Impossible to reach 50+ kph on the GET.
This is a completely stock GY6. Big bore and other mods ill be way past 100.
that thing is slow as shit lmfao
Ians Lyfe well it is a scooter 🤔