Nice, one handed! Only took me about 2 hours trying it from the top in the dark, without a garage, and should have just waited until the next day. But I don’t leaving work for tomorrow. Thank you for another great video
💪💪💪💪💪💪💪💪💯💯💯💯💯💯💯💯💯i have no excuse now, I need to change my belt, thanks for taking the time to show us, most people don’t realize when you’re showing an install in a video how challenging it can be, keep up the great work and god bless, I wish your channel prosperity, you are very entertaining
Man, it's so hard to film while doing any kind of work. I end up forgetting a lot of stuff when filming. You're worried about getting the right view and thinking about what to say.
You did that as easy with one hand as I did with two.... and your forearm didn't look like was run across a cheese grater. Ah, and I see you do use the fast forward thing while filming. :)
It is 11:00 p.m. and I've been trying to do this all day I popped up your RUclips video and it took me literally 5 minutes and I did it one handed. Absolutely the goat thank you.
I don’t understand “engine slam problem” ask here in the comments and if I can’t help you then I’m sure there are at least a few other Audi / vw techs that might be able to help We only have the 2.0t in the states but it should be almost identical
Just bought a new to me A5 cabriolet with the 2l tfsi... Driving it home and got battery warning and heavy steering. Popped the bonnet and the belts folded over itself and a width of it has come off lol... Be doing this job soon. Thanks for showing how easy it is. Appreciate it and appreciate you
Yo man start a discord channel with some text channels and voice channels for your subs and other viewers wanting mechanics advice or post pics of their cars and such! I could make one for you and just give you ownership of it after its all set up if you dont have time to do it yourself. Im sure you could build a nice little community kinda fast. Discord is free by the way, its just for a community.
@@NaptownTuner Yea its free and most people who have channels have one. It helps the community grow and lets members contribute and hang out together. It's free and can be set up in 5 minutes. Then you just share the link, p[pl join and the community grows. I have built communities with over 1000 ppl before. discord.com/
Just changed my belt an hour ago, the video was so helpful. Didnt have a dedicated tool but I managed to do it from above, used a 16mm open ended spanner. A longer spanner would have made things a lot easier for me. The Dayco belt i used was very tight even with the tensioner held back i wasnt able to get it on, so after struggling for 20mins i found putting the belt on the idler pulley at the end the easiest way. It took me 30mins in total!
I am a very, very big fan of your movies! Do you only fix 2.0 tfsi? I own a 1.8 tfsi but everything looks the same. Keep that camera rolling! Greetings from the Netherlands!
I was thinking of asking you about making a video on serpentine belt but then kinda hesitated. I don't think after all these videos you have been making, I wont ever use the half ass repair manuals again. Thanks for sharing
That’s only on one of my cars, I was traveling out of state sometimes towing with it and running the car all night to sleep in it so I felt a little better with the slip on oil filter cooler. Need to get my q5 back on the road but I’ve been towing with my truck lately
You ever put a car back together then it shuts off driving and doesn’t start but doesn’t show any codes? I smelled a lot of gas as soon as I got out the car. Btw you should start a patron or something I wouldn’t mind paying you for advice.
That’s a tough one with such limited info, would need to go back through all your work but I would think that the gas is a big hint and easy to track down then look at all your wiring. My twin turbo 300zx shut off while driving one time, the jdm engine from Japan already had the timing belt sticker as replaced and it looked good but one of the timing belt idler pulley bolts sheered clean off and I never touched those bolts. Felt like someone took the key out of the ignition
@@NaptownTuner Yeah i'll be checking it soon, but you should start something that people can ask you personal advice or help for a car. I wouldn't mind donating or paying for advice on my a4.
If you’re talkin about the one in this video, it’s an antique probably shouldn’t be using it, it’s too nice and worth some money ruclips.net/video/_E1LdWDtzjQ/видео.html
Nice, one handed!
Only took me about 2 hours trying it from the top in the dark, without a garage, and should have just waited until the next day. But I don’t leaving work for tomorrow. Thank you for another great video
💪💪💪💪💪💪💪💪💯💯💯💯💯💯💯💯💯i have no excuse now, I need to change my belt, thanks for taking the time to show us, most people don’t realize when you’re showing an install in a video how challenging it can be, keep up the great work and god bless, I wish your channel prosperity, you are very entertaining
Man, it's so hard to film while doing any kind of work. I end up forgetting a lot of stuff when filming. You're worried about getting the right view and thinking about what to say.
Professional hand again. Why not wear a 'go pro' on your forehead??
Thanks alot, I have learned many things about my engine (2.0 tfsi) and around since watching your channel . Keep the hard work ;)
You did that as easy with one hand as I did with two.... and your forearm didn't look like was run across a cheese grater.
Ah, and I see you do use the fast forward thing while filming. :)
Making Videos for one handed mechanics.. that’s cool! Or maybe you can buy GO Pro that can stick on to metal... 👍🏽
Great video help me out alot on doing this my self thanks bro
It is 11:00 p.m. and I've been trying to do this all day I popped up your RUclips video and it took me literally 5 minutes and I did it one handed. Absolutely the goat thank you.
im typing this with 1 hand.
Naptown Tuner is just MAGIC! I will try to replace mine. Not yet found the part here. P/N is 06B903137D
Great vid, thx for posting! Question: How do I remove the belt tensioner? I have a 2011 2.0 Q5.
"IM SICK OF USING ONE HAND ITS MY CHANNEL" 😂😂😂😂😂
My B8 2.0 TFSI tensioner "bounces" when the engine is running but the belts don't make noise. Is the bouncing normal? Thanks!
Hey how is it, have the same issue
Mine does the same, i think its normal because i have read the same thing people have written on forums.
hello, I will need to contact you in pv for an opinion following an engine slam problem on my A4 b8.5 1.8 tfsi 170cv?
I don’t understand “engine slam problem” ask here in the comments and if I can’t help you then I’m sure there are at least a few other Audi / vw techs that might be able to help
We only have the 2.0t in the states but it should be almost identical
Just bought a new to me A5 cabriolet with the 2l tfsi... Driving it home and got battery warning and heavy steering. Popped the bonnet and the belts folded over itself and a width of it has come off lol... Be doing this job soon. Thanks for showing how easy it is. Appreciate it and appreciate you
LMFAO, But eah it's easy
Yo man start a discord channel with some text channels and voice channels for your subs and other viewers wanting mechanics advice or post pics of their cars and such! I could make one for you and just give you ownership of it after its all set up if you dont have time to do it yourself. Im sure you could build a nice little community kinda fast. Discord is free by the way, its just for a community.
I’ll have to look into that not familiar
@@NaptownTuner Yea its free and most people who have channels have one. It helps the community grow and lets members contribute and hang out together. It's free and can be set up in 5 minutes. Then you just share the link, p[pl join and the community grows. I have built communities with over 1000 ppl before. discord.com/
Bro on god your video on how to remove intake manifold and replace fuel injectors saved my engine from gasoline infiltrating my oil
Thank you for your videos,very cool and useful 👍I’m gonna change belt on Audi A6 C6 BPJ. Should do the same there?
Just changed my belt an hour ago, the video was so helpful. Didnt have a dedicated tool but I managed to do it from above, used a 16mm open ended spanner. A longer spanner would have made things a lot easier for me. The Dayco belt i used was very tight even with the tensioner held back i wasnt able to get it on, so after struggling for 20mins i found putting the belt on the idler pulley at the end the easiest way. It took me 30mins in total!
I am a very, very big fan of your movies! Do you only fix 2.0 tfsi? I own a 1.8 tfsi but everything looks the same.
Keep that camera rolling! Greetings from the Netherlands!
Lol, nice
You really need a gopro or something so you can use 2 hands bc I'm trying to help you through the screen...lmfao 🤣
Hi, I’ve had a noisy powersteering on my A5 b8 2.0t. It works under load (at higher than 1k rpm). Any ideas on a fix? Thank you
I was thinking of asking you about making a video on serpentine belt but then kinda hesitated. I don't think after all these videos you have been making, I wont ever use the half ass repair manuals again. Thanks for sharing
Where is the fancy oil filter ?
That’s only on one of my cars, I was traveling out of state sometimes towing with it and running the car all night to sleep in it so I felt a little better with the slip on oil filter cooler. Need to get my q5 back on the road but I’ve been towing with my truck lately
Thumbs up for keeping it together and not whipping the wrench across the garage. Your a better man than me charlie brown. Thanks for sharing.
i love your content helped me install this belt in under 2 minutes also dropped the wrench LOL
Isn’t that junkyard engine missing the belt tensioner or?
Great video. Is there a such thing as the belt being too tight?
Hey man you have the best video on how to do this
The buff dudes long lost brother
Had mine changed yesterday at AUDI service dept. $400.00 . F.Y.I.
WOW I will do all the serpentine belts and take everyone’s $400 and you can watch me do it.
You ever put a car back together then it shuts off driving and doesn’t start but doesn’t show any codes? I smelled a lot of gas as soon as I got out the car. Btw you should start a patron or something I wouldn’t mind paying you for advice.
That’s a tough one with such limited info, would need to go back through all your work but I would think that the gas is a big hint and easy to track down then look at all your wiring. My twin turbo 300zx shut off while driving one time, the jdm engine from Japan already had the timing belt sticker as replaced and it looked good but one of the timing belt idler pulley bolts sheered clean off and I never touched those bolts. Felt like someone took the key out of the ignition
@@NaptownTuner Yeah i'll be checking it soon, but you should start something that people can ask you personal advice or help for a car. I wouldn't mind donating or paying for advice on my a4.
im gonna do this tommorrow morning!
This is not A5
Cheers for the help 💪
What brand is that creeper?
If you’re talkin about the one in this video, it’s an antique probably shouldn’t be using it, it’s too nice and worth some money ruclips.net/video/_E1LdWDtzjQ/видео.html
@@NaptownTuner I thought it was an antique of sorts! Yeah, best be hanging that on the wall for safe keepings!
Well done