안녕하세요 방문 감사드립니다. 아시겠지만 요즘 정밀 모형 키트 가격이 많이 비싸지고 있어요. 타미야 48스케일 에어로가 10만을 넘어가 버리죠. 거기다 별매 디테일 업 제품까지 구입하구 도색으로 완성한다면 아이템 하나에 수십만원이 들 수도 있습니다. 그래서 출시된지는 좀 되었지만 가성비 좋은 블랙호크를 작업해봤네요. 관심있게 봐주셔서 감사드립니다^^
Oh ok, thank you. Was it a specific motor or just any micro-motor? And was it attached to a crown gear like with the main rotor? Thanks again@@1dragon409
Hello:-) I have seen a picture of a blackhawk with motorcycle before. I build it because I thought it would be useful to have a motorcycle in a combat area such as a desert or rough terrain.
Wow, i was so impressed with the detail and then all of a sudden see it is motorized. So impressive! Looking forward to seeing it painted.
I'll upload blackhawk when I paint it:-)
Absolutely genius!
이제 디테일업은 끝난 것 같군요. 엄청나네요.
박수를 보냅니다.~~!!👏
고된 작업이었으나 디테일업 스킬을 많이 배웠습니다^^
ЗОЛОТАЯ НАГРАДА!!!
Amazing work!
Thanks a lot!
Wow great build
Thanks a lot 🙏
우연히 보게 되었는데, 너무 디테일한 부분이 많아서 깜짝 놀라고 갑니다!! 특히 메인랜딩기어 브레이크라인 연결하신거, 조종석 도어 수납함까지...👍👍
안녕하세요 방문 감사드립니다.
아시겠지만 요즘 정밀 모형 키트 가격이 많이 비싸지고 있어요.
타미야 48스케일 에어로가 10만을 넘어가 버리죠. 거기다 별매 디테일 업 제품까지 구입하구 도색으로 완성한다면 아이템 하나에 수십만원이 들 수도 있습니다.
그래서 출시된지는 좀 되었지만 가성비 좋은 블랙호크를 작업해봤네요.
관심있게 봐주셔서 감사드립니다^^
@@1dragon409 넵. 도색까지 응원하겠습니다!!
Wow... The details are awesome...
Awesome detail work. Does the chopper carry a motorbike as a makeshift missile against other choppers, Expandables 2-style?
Hello😊
The motorcycle is used to conduct operations in rough areas.
....блестящая работа!....
at 4:45, the #4 and 5 drive shaft covers open in the wrong direction. where is the disconnect shaft?
이야,우와,와!
메인로터 블레이드는 어떻게 개조했나요??
명예로운 기술자 이십니다 !
We have used plastic plates and copper sticks.
I'm amazed by your work but I have been trying to figure out how you powered the tail rotor. Is there a separate motor in the tail?
Yes, u are right:-)
A Micro-motor was used.
Oh ok, thank you. Was it a specific motor or just any micro-motor? And was it attached to a crown gear like with the main rotor?
Thanks again@@1dragon409
@_rocketpod Just any low price motor.
No crown gears,
Attach the gear directly to the motor shaft.
Awesome job on your helicopter. Love to see you do that to the new Kitty Hawk MH-60L kit. How did you motorize it?
Fa-13 motor, mini motor, crown gear, etc are used. It's not difficult:-)
멋지네요 👍👍👍
와 진짜 ㅈㄴ 멋지다
뭘 본거죠?
바이크가 탑승하고 있군요 ㅎㅎㅎ 도색완성된 모습이 벌써 궁금해집니다 ㅎㅎㅎ
지쳐서 좀 쉬었다 도색 달려볼게요^^
awesome work Dragon, cant wait to see more, one question, what are the motorcycles did you use?
Hello:-)
I have seen a picture of a blackhawk with motorcycle before.
I build it because I thought it would be useful to have a motorcycle in a combat area such as a desert or rough terrain.
@@1dragon409 you got me to thinking maybe I could try and do the same thing, if I can find the motorcycle's you used, keep up the good work.
@@christopherhayes3742 The kit is Tamiya 35245 JGSDF Motorcycle Recon Set.
Good luck and thanks a lot 😊
@@1dragon409 exellent, thank you very much
Is the academy better than the kittyhawk one?
Yes, it's better. But expensive
잘보고 있어요~~ 도색을 어찌할지 궁금하네요~ 전 조립하면서 도색하는지라
안녕하세요.
세가지 경우를 생각해보고 있는데 내부도 재현해서 일이 많겠네요^^
1. 올리브드랍 캔스프레이
2. 무광검정 캔스프레이
3. 올리브드랍 + 무광검정 조색 에나멜 붓도색
❤love🎉
at 3:20, what happen to the oil cooler fan?
Nothing!
Hi 👋 nice model
How much is this black hawk
Hello :-)
The kit was approximately 23 dollars in Korea.
@@1dragon409 are you in 🇰🇷 Korea
Are you an engineer?
Hello.
economics and law:-)
@@1dragon409 I'm a teacher in high school but so do I, like you. Nice to meet you. excellent job! I press 'like' and 'subscribe'
작정하고 디테일업 하시네요. 작살나네요.
안녕하세요.
공부하면서 도전해봤습니다.
사실 디테일업 작업은 제대로 해본적이 없어서 열심히 해봤네요^^