Hola acabo de instalarlo en una board gigabyte b450m ds3h versión 1 y no me está funcionando porque puede ser? Yo ya usaba ssd m.2 pero no está funcionando con este específicamente. Y lo probé en un portátil viejo y lo tomo automáticamente.
@@juandavidcastanedasanabria274 El SSD M.2 que tenias conectado también era NVME, en esta board el M.2 puede ser solo compatible con SATA dependiendo del procesador que tengas.
(Sorry, I do not speak your language) Guys I bought this adata legend 710 that promises 2400/1800. The reading reached 2400mb, but the writing does not exceed 900mb is this normal? it is half of what is advertised. The m2 of my mobo is PCIe 3.0 x4.
Hello Assetto. Could you tell me more on the specs that you went through, maybe I could assist but need to now more how you made the process. Its a bit low on the amount promised.
Hi Assetto, in our experience, the board, the processor, the BIOS version and even the operating system can influence the performance. You can try updating the BIOS of your board and the firmware of the SSD, Adata has special software for this with which you can also do a performance test and verify the health of the SSD. In any case, these speeds are not always reached, one more thing that you have to consider is that the temperature also affects performance, if the SSD is below the video card this can affect it a bit.
Tengo uno de esos y: El disipador no cubre completamente el M2,, me da la impresión de que queda mas alto en el chip o en las memorias,,, o no? y si no cubre completamente chip y memorias no refrigeraría correctamente?
Hola, en ese modelo en su momento no muchos tenían disipación (ya no lo manejamos y creo que ya no está disponible tampoco), poco le daban de importancia a la disipación de los M.2, aunque también es cierto que eran unos SSDs más fríos y seguramente ese disipador fuera suficiente.
Este SSD sera compatible con un i5 10400f y una mother b560 de gigabyte? Es que me comentaron que al ya tener una gráfica instalada, no me iba a detectar el ssd por que la gráfica ya estab utilizando el carril 3.0, gracias
Hello, can you help me to choose one 1. Adata legend 800 1tb gen4 2. Msi spatium m461 500gb gen4 Assume that ssd have same price but have different capacity..., thankyouu
I suggest not going with the adata nvme ssd as i've seen this ssd have tons of issus, mostly being its dram which prevents one's entire system from booting which basically is coz the ssd is done for. So i suggest going for other brands, especially the ones known to have fairly good reliability like Crucial or Sabrent and msi as u mentioned
Hola, este SSD es PCIe Gen3 x4, ahora mismo tenemos PCIe 4.0, los puedes encontrar en nuestro sitio web. cometware.com/productos/discos-duros/discos-solidos-m-2.html
Si, aunque tu sabes que todos los fabricantes de discos y unidades usan una conversión en donde dice que 1MB son 1000B y no 1024 cono debiera ser, así que sempre vas a ver menos capacidad por que cuando Windows muestra la capacitad si divide por 1024
Hola acabo de instalarlo en una board gigabyte b450m ds3h versión 1 y no me está funcionando porque puede ser? Yo ya usaba ssd m.2 pero no está funcionando con este específicamente. Y lo probé en un portátil viejo y lo tomo automáticamente.
Hola, puede ser una actualización de BIOS pendiente, verifica si ya tienes la versión más reciente.
@@cometware pues ayer actualice la BIOS y aún así sigue sin funcionar.
@@juandavidcastanedasanabria274 El SSD M.2 que tenias conectado también era NVME, en esta board el M.2 puede ser solo compatible con SATA dependiendo del procesador que tengas.
@@cometware pues la verdad el otro m.2 era con dos pestañas, no 1 como este Adata y mi procesador es un ryzen 3 3200g
@@juandavidcastanedasanabria274 yo lo tengo con un Ryzen 5 5600g en una A320M y sin problemas, tal vez solo tengas que hacer la partición manualmente
(Sorry, I do not speak your language)
Guys I bought this adata legend 710 that promises 2400/1800. The reading reached 2400mb, but the writing does not exceed 900mb is this normal? it is half of what is advertised. The m2 of my mobo is PCIe 3.0 x4.
Hello Assetto. Could you tell me more on the specs that you went through, maybe I could assist but need to now more how you made the process. Its a bit low on the amount promised.
Hi Assetto, in our experience, the board, the processor, the BIOS version and even the operating system can influence the performance.
You can try updating the BIOS of your board and the firmware of the SSD, Adata has special software for this with which you can also do a performance test and verify the health of the SSD.
In any case, these speeds are not always reached, one more thing that you have to consider is that the temperature also affects performance, if the SSD is below the video card this can affect it a bit.
its related to the volume you buy, the higher volume version come with higher speed
Tengo uno de esos y: El disipador no cubre completamente el M2,, me da la impresión de que queda mas alto en el chip o en las memorias,,, o no? y si no cubre completamente chip y memorias no refrigeraría correctamente?
Hola, en ese modelo en su momento no muchos tenían disipación (ya no lo manejamos y creo que ya no está disponible tampoco), poco le daban de importancia a la disipación de los M.2, aunque también es cierto que eran unos SSDs más fríos y seguramente ese disipador fuera suficiente.
Este SSD sera compatible con un i5 10400f y una mother b560 de gigabyte? Es que me comentaron que al ya tener una gráfica instalada, no me iba a detectar el ssd por que la gráfica ya estab utilizando el carril 3.0, gracias
Es compatible, de todas formas con el modelo exacto de la board se puede verificar, pero casi seguro que si
Es superior al ADATA SU800?
Hello, can you help me to choose one
1. Adata legend 800 1tb gen4
2. Msi spatium m461 500gb gen4
Assume that ssd have same price but have different capacity..., thankyouu
I suggest not going with the adata nvme ssd as i've seen this ssd have tons of issus, mostly being its dram which prevents one's entire system from booting which basically is coz the ssd is done for.
So i suggest going for other brands, especially the ones known to have fairly good reliability like Crucial or Sabrent and msi as u mentioned
Is this nvme?
Yes, it is PCIe Gen3 x4 and NVMe 1.3
@@cometware Thanks bro i just installed it today
ia told me 700 is protocol AHCI like olds ssd, 710,730 and 740 are Nvme
Buen video pero el ssd del video es pci 4.0?
Hola, este SSD es PCIe Gen3 x4, ahora mismo tenemos PCIe 4.0, los puedes encontrar en nuestro sitio web. cometware.com/productos/discos-duros/discos-solidos-m-2.html
Es 512 gb reales?
Si, aunque tu sabes que todos los fabricantes de discos y unidades usan una conversión en donde dice que 1MB son 1000B y no 1024 cono debiera ser, así que sempre vas a ver menos capacidad por que cuando Windows muestra la capacitad si divide por 1024