Korg Sound Editing (part 1) | Sound Mode Basics | Synthesizer basics

Поделиться
HTML-код
  • Опубликовано: 11 янв 2025

Комментарии • 84

  • @dbs5817
    @dbs5817 Год назад +1

    Thanks for unravelling the mysteries of sound edit! Great work

  • @alakans216
    @alakans216 3 года назад +5

    Your videos are great learning source for Korg Pa owners better than what KORG provided on their website. Thank you

  • @djba
    @djba 3 года назад

    I have watched thousands of RUclips videos on hundreds of different topics but I think this is one of the most informative I have ever watched. Thanks very much. Now on to Part 2.

  • @JoeCheriRoss
    @JoeCheriRoss 4 года назад +1

    This is something I have been searching for quite a long time. Thanks Manoj.

  • @Jesus_the_Savior-u4o
    @Jesus_the_Savior-u4o Год назад

    Like my other friends mentioned, you've been very generous and informative. With the benefit of this valuable information, my interest has developed a lot in sound developing. God bless you my friend.

  • @dennyrodrigues8779
    @dennyrodrigues8779 26 дней назад +1

    Hi. Thanks for the video. How do I remove vibrato from the existing sound while editing on a Korg PA 50 SD.

    • @ArrangerTutorials
      @ArrangerTutorials  24 дня назад

      Try adjusting vibrato knob

    • @dennyrodrigues8779
      @dennyrodrigues8779 24 дня назад

      @@ArrangerTutorials There is no vibrato knob for this model. Can you tell me which parameter to adjust to remove the vibrato.

    • @ArrangerTutorials
      @ArrangerTutorials  24 дня назад

      I dont have a pa50 now. I dont remember what were the options it has. Vbrato can be achieved using the vibrato knob or lfo or some FX. So it depends on how it was applied. Check if there are any effects with vibrato applied to it

  • @ahmadjawaid9138
    @ahmadjawaid9138 2 года назад

    Another great lesson 👌🏼👍🏼

  • @hnoormoh
    @hnoormoh 4 месяца назад +1

    Great video on sound. I have question on how to create a multi sample from scratch. I would like to create a Harmonium sample. Can you please share how to create a multi sample? Thank you. Hanif

    • @ArrangerTutorials
      @ArrangerTutorials  4 месяца назад

      @@hnoormoh thank you. I have already made a video on sampling. Check it out
      ruclips.net/video/0Buv8DuIuW0/видео.html

  • @rudysmit5137
    @rudysmit5137 4 года назад

    Many thanks Manoj, keep up the good work.

  • @arpitjainar93
    @arpitjainar93 4 года назад

    Eagerly waiting for this topic, Thanks, keeps uploading more, best wishes.

  • @troycarpenter4355
    @troycarpenter4355 4 года назад

    Hi Manoj. Many thanks for this and all your other videos. Great tutorials.

  • @nitinkaushik6443
    @nitinkaushik6443 4 года назад

    Very well explained sir, these kind of videos are needed a lot so waiting eagerly for the next one

  • @JamesNoteology
    @JamesNoteology 4 года назад

    Thanks for another informative tutorial

  • @yogeshdeys
    @yogeshdeys 4 года назад

    Really good information with a simple method👍

  • @sreekanthnair
    @sreekanthnair 3 месяца назад

    Thank you!

  • @aleksandarbonchev2593
    @aleksandarbonchev2593 Год назад

    Hello. Thank you for this video. It make me understand more sound editing. Can you specific tell me how to make fabric piano sound more louder. I will be very grateful. Thank you

    • @ArrangerTutorials
      @ArrangerTutorials  Год назад +1

      There are different ways to increase the level of a sound. If the track volume is 127 and you dont get enough level try some of the below options
      1. In the sound mode, if the oscillators are not set to the maximum level, try increasing them
      2. Adding some fx like compressor can give high levels
      3. If all those dont work, try balancing all the sounds in the Kab sets and keep a lower volume for all the sounds in tracks. Then the ones with very low volume can be set to 127.

  • @jlmmcguirkmusic6050
    @jlmmcguirkmusic6050 4 года назад

    Thank You, Manoj.

  • @AbhisekChakravorty
    @AbhisekChakravorty Год назад

    Sir can we do the same level of editing in the sx900, i do not see how to choose the oscillator settings in my sx900

    • @ArrangerTutorials
      @ArrangerTutorials  Год назад

      Not all of them. On yamaha arrangers, there are very limited options onboard. But in expansion manager when you try to create a new sound a lot of those things as in Korg are there. But not all

  • @bensel46
    @bensel46 4 года назад

    Thanks a lot Manoj 👍👍👍

  • @erfan-i2o
    @erfan-i2o Месяц назад

    Hello and thank you for your good videos, I had a question, how can I set the speed of the loop with the tempo of the rhythm in the korg arranger, so that the speed of the loop changes when the tempo of the rhythm changes?

    • @ArrangerTutorials
      @ArrangerTutorials  Месяц назад

      @@erfan-i2o is it a loop running on a different device? In that case i think there is no option to sync the tempo

  • @sagarhbad
    @sagarhbad 4 года назад

    Very Good initiative Manoj👏

  • @JustinThomasT
    @JustinThomasT 2 года назад

    Hi Sir,
    Reallly Nice video With Good Information.

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      Thank you

    • @JustinThomasT
      @JustinThomasT 2 года назад

      Sir You are from??
      I am From Kerala.
      Sir are you a keyboardist or Sound Engineer?

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      @@JustinThomasT I am in trivandrum. I play keyboard in choirs. Not a sound engineer 🙂

    • @JustinThomasT
      @JustinThomasT 2 года назад

      @@ArrangerTutorials I am from Thrissur.
      Nice to meet you.
      I also play Keyboard at Church 😊

  • @dimitrism1201
    @dimitrism1201 2 года назад

    Hello, Congratulations for your nice step by step videos!!!!I want your help on something.I have a user sound that the volume is lower than all the other sounds.I try to increase the volume from sound editing,osc etc but all settings for volume are on highest setting.How can I increase the volume of this sound?...Maybe need to do it on sampling menu?..Thnks a lot!

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      If it is a custom sample, try normalizing the sample in the sample edit page. That may improve it

    • @dimitrism1201
      @dimitrism1201 2 года назад +1

      Thank you very much I will try it.

  • @Exchikan1
    @Exchikan1 3 года назад

    Thank you Sir. Are these functions there in KORG PA 700?

  • @federalat831
    @federalat831 Месяц назад

    Hello sir, can you tell me how to make my overall audio output sound louder or more powerful because my pa4x sounds low until I raise the drawer bars manually, there should be a way where it's automatically set to sound loud and crispy. Thank you it's much appreciated

    • @ArrangerTutorials
      @ArrangerTutorials  Месяц назад

      I think you have to tweak the mast eq and maxx audio for output

  • @skoorapati1
    @skoorapati1 4 года назад

    Fantastic tutorial, Manoj! Watching your videos is like drinking water from a fire hose!! So much info packed in such a short video. I find most of the standard sounds are not loud enough for me even at 127 volume. I could never figure out how to change that but you mentioned it briefly in this video. Question - are factory set sounds editable? Or do we need to save it under different name in some user bank and then edit it?

    • @ArrangerTutorials
      @ArrangerTutorials  4 года назад

      Thank you Siva. I think you can overwrite the factory sounds. But I haven't tried to do it yet. What I would recommend is to make changes to the factory sound and then save it as a user sound.

    • @GalantGoStudio
      @GalantGoStudio 4 года назад +1

      Go to Global settings then open "Mode preferences" / Media page , here you will find protect settings , just uncheck "Factory" and now your factory sounds will be editable.

    • @ArrangerTutorials
      @ArrangerTutorials  4 года назад +1

      Thank you

  • @mayankpardhaan4577
    @mayankpardhaan4577 2 года назад

    Dear sir it is possible to make high quality tones of been sarangi jal tarang banjo in korg pa 600 please reply

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      Yes. PA600 has sampling now. So if you have the high quality samples of those sounds, you can make them

  • @stefancelmaresitare
    @stefancelmaresitare 3 года назад

    Hi, I've imported sounds. For a sound, for exemple, if I choose 6 oscillators, I heard only kind of noises. If I raise the nbr at 7 I heard a piano sound ( the sound was supposed to be a trumpet!) . May I do something to heard the real sound?

    • @ArrangerTutorials
      @ArrangerTutorials  3 года назад

      May be the samples are missing. Or the triggering modes are different. There are a lot of settings in oscillators. My next video is on oscillators. I will upload it in a few days

  • @Kareemkhan-bh6gl
    @Kareemkhan-bh6gl 3 года назад

    Are these tone editing options available in KORG pa1000 too..? same as pa4X...??

  • @jrf1962
    @jrf1962 2 года назад

    Ho have you fot a video tutorial how to use the vocoder in the PA4X step by step?

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      Not made yet

    • @jrf1962
      @jrf1962 2 года назад

      @@ArrangerTutorials ok. Could you make one? Korg didn' t support me on the phone and i am still in warranty. I will never buy again a Korg product because their sevice is very bad and you pay a lot of money for their Keyboards. Manual are not easy to understand.

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад +1

      @@jrf1962 ok. Will plan for a video

  • @GalantGoStudio
    @GalantGoStudio 4 года назад

    Thank you for your great videos 👍

  • @costasliadakis7577
    @costasliadakis7577 2 года назад

    Hi..i have a korg pa300 ,i opened sound edit ,chose what i liked ,then menu -write sound -yes ....and a waring label says ..save it ,otherwise it 'll be lost ...how do i save it ?

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      When you select write sound, you will have options to set a new name, select the user bank and location to save the sound to. Once you set the name and the location to save it press OK. That will save the sound to the user bank and location selected.
      Now you can assign the saved sound to a keyboard set track a style track or a midi track.

  • @RAJIVKUMAR-ro4vz
    @RAJIVKUMAR-ro4vz 3 года назад

    sir how to create bass drop , pls tell me

    • @ArrangerTutorials
      @ArrangerTutorials  3 года назад

      There are many options.Using pitch bender, have a sample with the bass drop and assign it to the keys, use a pitch envelop

  • @naveenjedia7445
    @naveenjedia7445 3 года назад

    Can we layer 16 sounds to make one performance.
    In PA 4x?

    • @ArrangerTutorials
      @ArrangerTutorials  3 года назад

      You can layer only 3 upper and 1 lower sounds in a performance. But in a sound, you can layer up to 24 oscillators

  • @rafikdewan499
    @rafikdewan499 4 года назад

    Manoj ji I purchased on Nov 02 today I recorded one song when I was playing every it was giving good sound but when I finished recording and listen it was not as I recorded sound was cutting

  • @kushankaumal5887
    @kushankaumal5887 2 года назад

    🙏🙏🙏

  • @dasman0083
    @dasman0083 7 месяцев назад

    How to copy SETTING edit sound voices to another / How to copy sound settings to another sound ( in Edit Sound Menu )

    • @ArrangerTutorials
      @ArrangerTutorials  7 месяцев назад

      Using copy oscillator feature

    • @dasman0083
      @dasman0083 7 месяцев назад

      @@ArrangerTutorials I've copied the oscillator, but the voice on 1 2 3 also changes, I mean, I just want to copy the settings, do you have Telegram or WhatsApp, so I can send my video

  • @ridhaghariani4263
    @ridhaghariani4263 Год назад

    👍💖🎹🤩

  • @cendakrys
    @cendakrys 4 года назад

    👍👍🙏🙏

  • @debkumarbhattacherjee377
    @debkumarbhattacherjee377 3 года назад

    🙂🌹🙏🙏👌

  • @ShyamSunder-ne5zu
    @ShyamSunder-ne5zu 2 года назад

    Sir Hindi me video banao please

    • @ArrangerTutorials
      @ArrangerTutorials  2 года назад

      I am not fluent in Hindi. So it is difficult for me to make Hindi videos. But there are English subtitles. So you can use RUclips’s auto translate feature to get Hindi subtitles

  • @LesGres
    @LesGres 4 года назад

    Thanks Manoj!