Very nice video and explanations. I have a BX with minimal lift capacity. I just traded down to LandPride 1242 forks, which are the best branded match. They are lift rated for 1200#, and are 42” long. They have the upper guard, and weigh 220#, which is the main feature.
Craig, looks like you did your homework. Most people just look for "Heavy Duty" which typically means 400-500 Lbs pallet forks. Though your BX is probably rated for 36" forks your smart in getting the 42". In my opinion they are more versatile. Thanks for watching and commenting TCT
Jeremiah once you get a pallet fork you wished you would have known sooner. They save so much time and are a multi-functional attachment. Thanks for watching and commenting 👍TCT
You should just totally "Scrap" those "bucket add on" rinky-dinky dangerous Excuse of a "certified pallet fork system ". Your "LIFE & others" is worth the 500-900$ INVESTMENT. After all"Mr. Tony" said it ALL.
Good review Tony. You made a very valid point with the heavy duty equipment on the compact tractor. Any weight saved on the attachment makes for more lifting capacity. Especially when lifting totes of "wet" wood!
Frances I learned quick I needed the lightest and strongest pallet forks out there even if I had to pay a premium. Thanks for watching and commenting 👍TCT
A word of advice when buying pallet forks. I would (and did) buy pallet forks that far exceed the lifting capacity of whatever your FEL is on your tractor. My tractor's lift capacity is about 3,400lbs. So, I got a set of Erskine pallet forks rated to lift 5K. Because often times, when I'm moving something suspended by a strap or chain, I'm only using a single fork, not both, and if you lift something heavy with just a single fork, if your forks aren't rated for more than your tractor's lifting capacity, it's very easy to "tweak" that one fork.
Jeff I’ve never tried that, I always used both forks when lifting. I just move slightly off to the left or right of where the slot is to remove the pallet forks. That’s why I like the Artillian fork frame with chain slots. Thanks for watching and commenting 👍TCT
TITAN is pretty much bottom of barrel but a few years back they offered an american made fork 4000 lbs . they may still offer it. i will look at model i am moving logs w FRANSGARD sk-950 log grapple. its similar design to FROSTBITE but made with 420 HARDOX and better welds also said MADE IN Sweden ya it was a few bucks more but i smile every time i use it. buy once cry once! i started crying in the 80s with STRAP-ON ! i still smile when i use those fine tools.
Rikki thanks for sharing, I had to look up the Fransgard SK-950 because I’ve never heard of the brand. It definitely looks well made and typically any of the European logging equipment is really HD. Like you I don’t mind spending a little more to get quality. I too smile every time I use my Frostbite grapple. Appreciate you watching and commenting 👍TCT
First video of yours that I've seen. Very well done. Watched it on TV and actually took the time to find it on the computer so I could write this comment. Thank you much, sir.
Glad you enjoyed the video. Thanks for taking the time to watch it on big screen, I know what a pain it is to input with the remote. Check out some of my other tractor videos. Appreciate you watching and commenting 👍TCT
Thanks for the great review, Tony! I will have to check into these attachments for both my compact and John Deere tractors. Take care and have a great week!
Steve don’t get me wrong I love my Wicked 55 Everything Attachment pallet forks but wish I would have known about the Artillian system with the 2” receiver and chain slots. Definitely the way to go even if you don’t buy any other Artillian attachments. Thanks for watching and commenting 👍TCT
Very well done presentation today. Well thought out, Nice audio and lighting as well. And you are getting the camera distance much better than before. All this makes a big difference learning about the different topics you choose. Congratulations on the progress you've made , especially the attention to production detail.
I would agree on forks.. my Dad's tractor came with them an and before we knew of others attachments these forks and loader bucket were and still is his best attachments
Daniel I was luck to always have a set of forks whether bolt on or SSQA. It’s the most used attachment out there. Thanks for watching and commenting 👍TCT
Joe it’s hard to go wrong with most of the manufacturers that make pallet forks. The one thing I like about the Artillian is the 2” receiver. I can’t tell you how many uses I’ve found for it. Good luck with your search and drop a line if you need additional info. Appreciate you watching and commenting 👍TCT
Love my pallet forks. Just used them this morning to move a treetop that came down in a storm. I had it moved and on the burn pile in less time than it would have taken to put the grapple on the tractor
James I can’t tell you in a day how many times I’m switching loader attachments. My pallet forks are on my tractor 85% of the time. Thanks for watching and commenting 👍TCT
@@TonysCoolTools same. I only put the grapple on when I know I have a lot of work to do with it. It’s a pleasure to use on the DK4210SE. I’m amazed what it’ll lift
I have an Everything Attachments 42” Hardox tine fork on my JD 1025R. Most used attachment for sure. I made a 4’ x 4’ log & chainsaw carrier to shag cut wood to my splitting area that fits the fork.
I have the clamp-on forks currently and I've been looking to upgrade to a set of pallet forks, this was helpful info in my research. Have a good one Tony!
Good morning Tony . I could not own a tractor without pallet forks . As you explained . Always buy the right ones matched for your lifting capacity . Too many times I have seen way too heavy pallet forks used . Pay the money and buy good strong and quality forks matched too your tractor 👍👍👍🇨🇦
Stephen, I agree with you 100%. Pallet forks are truly a multi functional attachment every tractor and skid steer owner should have. Thanks for watching and commenting 👍TCT
Tony this year has been grapple on the tractor and pallet forks on the skid loader, it’s a good combination. I also have a grapple bucket for my skid loader. As well as a 4 in one and a utility bucket , just like Bert’s.
Thanks- I love the idea of the trolley for moving implements around on-it so happens that I have a set of casters just like that and some 3x3 timber - I am going to knock up one of those
Ain't gonna lie, I'm currently trying to decide whether to buy a set of those Artillian forks or put gutters on the house. That is a very-well engineered piece of kit.
That’s a tough question. Gutters are extremely important because they can stop water damage from happening to your house foundation. That would be my first choice. However as I’ve stated the pallet forks stay on my tractor 85% of the time and I use them on a daily basis. Thanks for watching and commenting 👍TCT
Jimmie, it all depends if the manufacturer is running a sale or not. The Artillian is more expensive then the Everthing Attachment by about $450-$500. But remember you’re getting the 2” receiver and chain slots on the Artillian and it’s a system if you plan on getting other attachments. Thanks for watching and commenting 👍TCT
Your shows are between a Educational documentary and a Advertisement, always interesting Tony ! Thanks for sharing your wonderful world with all of us!
@@eddiemortontapman7252 Eddie, I believe in RUclips land it’s referred to as “Edutainment” . I try my best to show tools many people haven’t seen but are extremely useful and multifunctional. Thanks for watching and commenting 👍TCT
Tony...... please tell me that you had the cylinder lock-sleeve in place before you stood underneath???? Where I work, this is immediate termination, zero questions asked...... Just gotta know, thanks bud.....
Wade, yes though you couldn’t see the lift cylinders I had a metal safety bar installed in case the loader bucket came down. Thanks for pointing that out. Appreciate you watching, commenting and supporting my channel.👍TCT
Great video Tony. Have you had issues of adequate spacing options between each fork on these two choices or can you select infinite spacing between the forks when using? Also of note is Everything Attachment is making the news in Carolina with some legal issues so caution new buyers.
Tim, though there are slots or detents where the forks lock into I can slide both forks anywhere along the pallet frame with the exception of directly in the middle where a slot of about 6” is cut out so you can remove the forks if needed. Thanks for sharing info on Everything attachments, I was unaware they were having issues. Appreciate you watching and commenting 👍TCT
The newer tractors primarily use two types of quick attach. 1st is the skid steer quick attach which is the most popular. 2nd is the John Deere quick attach which is exclusively for their tractor. There is a 3rd system which is a Euro Quick attach but it’s not that popular in the US. Thanks for watching and commenting 👍TCT
Stain, that’s a tough question for sure. Thought I don’t own any Husqvarna chain saws if I were to buy one it would be the 572 for sure. I’ve used my friends 572 and really enjoy cutting with it. With that being said I own a MS 460 and have been using it for years on big wood but the problem is it’s heavy. Last year I purchased the MS 462 and can’t believe how enjoyable it is to cut with. The saw I use most is the MS500 but after getting the MS 462 it’s a hard decision which is my favorite the 462 or 500? You can’t go wrong with buying the MS462. Thanks for watching and commenting 👍TCT
@@stiantnnessen2671 Stian sorry for the delay in getting back to you., I was traveling. " I am extremely happy with the MS462. I use a 24" bar and it seems well balanced for me.👍TCT
@@stiantnnessen2671 well that’s like asking me which one of my daughters I like best😂 They are my top two saws when I’m cutting. However, if you twist my arm I’ll have to say the MS500 is my favorite. There is just something with the fuel injection and the snappy response I really like. I purchased the MS 462 so I could switch out saws when Im cutting a lot. I don’t want to burn out the MS 500. 👍TCT
Tony the issue is you have a pin type loader arm. Companies. Make a conversion plate to change from a fixed loader bucket to a quick attach. They are about $800 to $1000 for the plate. Then you can use anyone’s attachment . Check out or call Everything Attachments and they can walk you through it. Thanks for watching and commenting 👍TCT
Rikki what I found is most mid-size tractors don’t have the lift capacity for a 4000lb pallet system. Naturally what I look for is the lightest and strongest pallet fork system. I found the Ariillian pallet forks are rated at 3000lbs and only weigh 242 lbs which gives my tractor more lift capacity. I’ll have to check out the United Attachments line of products. Appreciate your info. 👍TCT
Sorry to hear that, service during and after the sale are so important. Thats why I may pay a little more for a piece of equipment but have peace of mind I can get answers when I need them. Thanks for watching and commenting TCT
Very nice video and explanations. I have a BX with minimal lift capacity. I just traded down to LandPride 1242 forks, which are the best branded match. They are lift rated for 1200#, and are 42” long. They have the upper guard, and weigh 220#, which is the main feature.
Craig, looks like you did your homework. Most people just look for "Heavy Duty" which typically means 400-500 Lbs pallet forks. Though your BX is probably rated for 36" forks your smart in getting the 42". In my opinion they are more versatile.
Thanks for watching and commenting TCT
I have a set of the clamp on forks, they are a pain. Normal forks like these would be awesome! Thanks Tony👍👍
Jeremiah once you get a pallet fork you wished you would have known sooner. They save so much time and are a multi-functional attachment.
Thanks for watching and commenting 👍TCT
You should just totally "Scrap" those "bucket add on" rinky-dinky dangerous Excuse of a "certified pallet fork system ". Your "LIFE & others" is worth the 500-900$ INVESTMENT. After all"Mr. Tony" said it ALL.
Nice comparison Tony 😁👍 The Artillian fork frame would be my preferred system!
*Keep on tractoring!*
Jon I totally agree. With the 2” receiver and chain slots it’s a no brainer.
Thanks for watching and commenting 👍TCT
Good review Tony. You made a very valid point with the heavy duty equipment on the compact tractor. Any weight saved on the attachment makes for more lifting capacity. Especially when lifting totes of "wet" wood!
Frances I learned quick I needed the lightest and strongest pallet forks out there even if I had to pay a premium.
Thanks for watching and commenting 👍TCT
A word of advice when buying pallet forks. I would (and did) buy pallet forks that far exceed the lifting capacity of whatever your FEL is on your tractor. My tractor's lift capacity is about 3,400lbs. So, I got a set of Erskine pallet forks rated to lift 5K. Because often times, when I'm moving something suspended by a strap or chain, I'm only using a single fork, not both, and if you lift something heavy with just a single fork, if your forks aren't rated for more than your tractor's lifting capacity, it's very easy to "tweak" that one fork.
Jeff I’ve never tried that, I always used both forks when lifting. I just move slightly off to the left or right of where the slot is to remove the pallet forks.
That’s why I like the Artillian fork frame with chain slots.
Thanks for watching and commenting 👍TCT
TITAN is pretty much bottom of barrel but a few years back they offered an american made fork 4000 lbs . they may still offer it. i will look at model i am moving logs w FRANSGARD sk-950 log grapple. its similar design to FROSTBITE but made with 420 HARDOX and better welds also said MADE IN Sweden ya it was a few bucks more but i smile every time i use it. buy once cry once! i started crying in the 80s with STRAP-ON ! i still smile when i use those fine tools.
Rikki thanks for sharing, I had to look up the Fransgard SK-950 because I’ve never heard of the brand. It definitely looks well made and typically any of the European logging equipment is really HD.
Like you I don’t mind spending a little more to get quality. I too smile every time I use my Frostbite grapple.
Appreciate you watching and commenting 👍TCT
First video of yours that I've seen. Very well done. Watched it on TV and actually took the time to find it on the computer so I could write this comment. Thank you much, sir.
Glad you enjoyed the video. Thanks for taking the time to watch it on big screen, I know what a pain it is to input with the remote.
Check out some of my other tractor videos.
Appreciate you watching and commenting 👍TCT
Forks are invaluable. Another great video Tony!
Mike it’s amazing all the things you can do with a pallet fork.
Thanks for watching and commenting 👍TCT
Thanks for the great review, Tony! I will have to check into these attachments for both my compact and John Deere tractors. Take care and have a great week!
Steve don’t get me wrong I love my Wicked 55 Everything Attachment pallet forks but wish I would have known about the Artillian system with the 2” receiver and chain slots.
Definitely the way to go even if you don’t buy any other Artillian attachments.
Thanks for watching and commenting 👍TCT
Thanks Tony.
Another fine American made product
Leo yes it is.
Thanks for watching and commenting 👍TCT
Thanks Tony 🚜👍👏🇺🇸 Rick
Rick I’m glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Yep , your rite again ! Forks are a must .
Bruce, the loader bucket is a must but I use pallet forks most of the time.
Thanks for watching and commenting 👍TCT
Quantity is not the answer to all you tubing questions.
Great vid
Outdoors with Larry and Robin stole my comment. Another helpful video. Thanks. Love my forks
Ha ha Rick, Larry is extremely fast with comments!
Thanks for watching and commenting 👍TCT
Very well done presentation today.
Well thought out,
Nice audio and lighting as well.
And you are getting the camera distance
much better than before.
All this makes a big difference learning about the different topics you choose.
Congratulations on the progress you've made , especially the attention to production detail.
Glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
I would agree on forks.. my Dad's tractor came with them an and before we knew of others attachments these forks and loader bucket were and still is his best attachments
Daniel I was luck to always have a set of forks whether bolt on or SSQA.
It’s the most used attachment out there.
Thanks for watching and commenting 👍TCT
Great job as always Tony. Thanks for sharing 👍
Frank, glad you liked the video.
Thanks for watching and commenting 👍TCT
Another great review Tony, thanks.
Michael glad you liked the video.
Appreciate you watching and commenting 👍TCT
Another great video Tony ( ty Ron
Glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Another great video! I have been here since #1
Robert glad you enjoyed the video.
Appreciate you watching and commenting 👍TCT
Thanks for this video! I need forks badly. Checking out some options.
Joe it’s hard to go wrong with most of the manufacturers that make pallet forks. The one thing I like about the Artillian is the 2” receiver. I can’t tell you how many uses I’ve found for it. Good luck with your search and drop a line if you need additional info.
Appreciate you watching and commenting 👍TCT
@@TonysCoolTools Thanks for replying sir! Stay warm up there!
Love my pallet forks. Just used them this morning to move a treetop that came down in a storm. I had it moved and on the burn pile in less time than it would have taken to put the grapple on the tractor
James I can’t tell you in a day how many times I’m switching loader attachments.
My pallet forks are on my tractor 85% of the time.
Thanks for watching and commenting 👍TCT
@@TonysCoolTools same. I only put the grapple on when I know I have a lot of work to do with it. It’s a pleasure to use on the DK4210SE. I’m amazed what it’ll lift
Great review on the pallet forks
Larry glad you liked the video.
Thanks for watching and commenting.👍TCT
Another well done review!
Thanks Heath, I’m sure pallet forks are mandatory in your Woodyard as well.
Appreciate you watching and commenting 👍TCT
I have an Everything Attachments 42” Hardox tine fork on my JD 1025R. Most used attachment for sure. I made a 4’ x 4’ log & chainsaw carrier to shag cut wood to my splitting area that fits the fork.
Your log and chain carrier sounds very interesting.
Thanks for watching and commenting 👍TCT
Great review Tony!
Nathan, glad you enjoyed the video
Thanks for watching and commenting 👍TCT
I agree Tony, one of the first attachments to purchase.
Terry, they are indispensable on my property.
Thanks for watching and commenting 👍TCT
I like your videos. Very informative and easy to follow.
James I’m glad you enjoy my videos. More good stuff to come.
Thanks for watching and commenting 👍TCT
I have the clamp-on forks currently and I've been looking to upgrade to a set of pallet forks, this was helpful info in my research. Have a good one Tony!
Well Bobby now you have a little bit more information to make a buying decision.
Thanks for watching and commenting 👍TCT
Tony another great tool for you know who to borrow from you ❤😊😮lol
Ha ha Todd like I always say you don’t have to own all the cool tools just have a friend who has them.
Thanks for watching and commenting 👍TCT
Good morning Tony . I could not own a tractor without pallet forks . As you explained . Always buy the right ones matched for your lifting capacity . Too many times I have seen way too heavy pallet forks used . Pay the money and buy good strong and quality forks matched too your tractor 👍👍👍🇨🇦
Stephen, I agree with you 100%. Pallet forks are truly a multi functional attachment every tractor and skid steer owner should have.
Thanks for watching and commenting 👍TCT
Hey Tony how are you doing 🎉I'm good great video and great product 👍
Robert, glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Good morning Tony, An informative and interesting video. Nice job👍 pallet forks are a favorite of mine as well. Ben
Ben the pallet forks help me accomplish many tasks not many attachments can do.
Thanks for watching and commenting 👍TCT
Good morning and thanks Tony, another informative review.
Mark glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
That was a nice load of IBC totes.
Yup, “I know a guy” 👍TCT
Tony this year has been grapple on the tractor and pallet forks on the skid loader, it’s a good combination. I also have a grapple bucket for my skid loader. As well as a 4 in one and a utility bucket , just like Bert’s.
Brian it sounds like you have it covered at both ends. A skid steer would be nice for sure.
Thanks for watching and commenting 👍TCT
Thanks- I love the idea of the trolley for moving implements around on-it so happens that I have a set of casters just like that and some 3x3 timber - I am going to knock up one of those
Derek, you’re really going to like how easy it is to move heavy attachments.
Thanks for watching and commenting 👍TCT
Ain't gonna lie, I'm currently trying to decide whether to buy a set of those Artillian forks or put gutters on the house. That is a very-well engineered piece of kit.
That’s a tough question. Gutters are extremely important because they can stop water damage from happening to your house foundation.
That would be my first choice.
However as I’ve stated the pallet forks stay on my tractor 85% of the time and I use them on a daily basis.
Thanks for watching and commenting 👍TCT
👍👍
Glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Artillian seems like the way to go.
Are they much more cost wise than the other set far as the starter set with the forks and add on as you go...
Jimmie, it all depends if the manufacturer is running a sale or not.
The Artillian is more expensive then the Everthing Attachment by about $450-$500. But remember you’re getting the 2” receiver and chain slots on the Artillian and it’s a system if you plan on getting other attachments.
Thanks for watching and commenting 👍TCT
👍
Thanks for stopping by👍TCT
Kemimoto. Those are some cool mirrors.
Thanks for watching and commenting 👍TCT
hi there good show john
Glad you enjoyed it John.
Did you get my email with my address?
Thanks for watching and commenting 👍TCT
hi never came threw was planning on calling tonight ,john@@TonysCoolTools
John I tried to call you, I left a voice mail with my address otherwise just call.
👍TCT
Nice presentation tony
Eddie, glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Your shows are between a Educational documentary and a Advertisement, always interesting Tony ! Thanks for sharing your wonderful world with all of us!
@@eddiemortontapman7252 Eddie, I believe in RUclips land it’s referred to as
“Edutainment” .
I try my best to show tools many people haven’t seen but are extremely useful and multifunctional.
Thanks for watching and commenting 👍TCT
Great video
Glad you enjoyed the video.
Thanks for watching and commenting 👍TCT
Tony...... please tell me that you had the cylinder lock-sleeve in place before you stood underneath???? Where I work, this is immediate termination, zero questions asked...... Just gotta know, thanks bud.....
Wade, yes though you couldn’t see the lift cylinders I had a metal safety bar installed in case the loader bucket came down.
Thanks for pointing that out.
Appreciate you watching, commenting and supporting my channel.👍TCT
Great video Tony. Have you had issues of adequate spacing options between each fork on these two choices or can you select infinite spacing between the forks when using? Also of note is Everything Attachment is making the news in Carolina with some legal issues so caution new buyers.
Tim, though there are slots or detents where the forks lock into I can slide both forks anywhere along the pallet frame with the exception of directly in the middle where a slot of about 6” is cut out so you can remove the forks if needed.
Thanks for sharing info on Everything attachments, I was unaware they were having issues.
Appreciate you watching and commenting 👍TCT
Good Forkn video Tony, 🪵👍🏼🇺🇸
What??? you mean Forkn good video????
Ha ha Larry good one!
Hope you and Robin are rested up from Boonville.
Thanks for watching and commenting 👍TCT
Nice Larry🤣
Larry 🤣🤣🤣👍
Do all attachments fit all skd steers and tractors?
Are they that universal?
The newer tractors primarily use two types of quick attach.
1st is the skid steer quick attach which is the most popular.
2nd is the John Deere quick attach which is exclusively for their tractor.
There is a 3rd system which is a Euro Quick attach but it’s not that popular in the US.
Thanks for watching and commenting 👍TCT
Hei Tony wath are your appinions on the Stihl ms 462c i wonder to switch from Husqvarna 572 to the 462cm vh stian 😊
Stain, that’s a tough question for sure. Thought I don’t own any Husqvarna chain saws if I were to buy one it would be the 572 for sure. I’ve used my friends 572 and really enjoy cutting with it.
With that being said I own a MS 460 and have been using it for years on big wood but the problem is it’s heavy. Last year I purchased the MS 462 and can’t believe how enjoyable it is to cut with. The saw I use most is the MS500 but after getting the MS 462 it’s a hard decision which is my favorite the 462 or 500? You can’t go wrong with buying the MS462.
Thanks for watching and commenting 👍TCT
Are you happy with the Stihl ms 462cm
@@stiantnnessen2671 Stian sorry for the delay in getting back to you., I was traveling. "
I am extremely happy with the MS462. I use a 24" bar and it seems well balanced for me.👍TCT
Wath saw wood you recommend the Stihl ms 500i or det 462c vh stian 😊
@@stiantnnessen2671 well that’s like asking me which one of my daughters I like best😂
They are my top two saws when I’m cutting.
However, if you twist my arm I’ll have to say the MS500 is my favorite.
There is just something with the fuel injection and the snappy response I really like.
I purchased the MS 462 so I could switch out saws when Im cutting a lot.
I don’t want to burn out the MS 500. 👍TCT
Do this company make these to fit 1980 ford tractors
Tony the issue is you have a pin type loader arm. Companies. Make a conversion plate to change from a fixed loader bucket to a quick attach. They are about $800 to $1000 for the plate. Then you can use anyone’s attachment . Check out or call Everything Attachments and they can walk you through it.
Thanks for watching and commenting 👍TCT
@@TonysCoolTools Think you for your time of checking about the pin attachment for my tractor. Tony. from Missouri
Hello Tony😀🇦🇺
Hey Rick, thanks for stopping by.
Thanks for watching and commenting 👍TCT
UNITED ATTACHMENT is the USA made 4000lb forks the good stuff will say UA the other is low quality china product my UA forks work fine
Rikki what I found is most mid-size tractors don’t have the lift capacity for a 4000lb pallet system. Naturally what I look for is the lightest and strongest pallet fork system. I found the Ariillian pallet forks are rated at 3000lbs and only weigh 242 lbs which gives my tractor more lift capacity.
I’ll have to check out the United Attachments line of products.
Appreciate your info. 👍TCT
Titan customer service sucks
Sorry to hear that, service during and after the sale are so important. Thats why I may pay a little more for a piece of equipment but have peace of mind I can get answers when I need them.
Thanks for watching and commenting TCT