There's no harm in closing the pointer scan. You just need to open it up again. The next, for people who can't find values in the 2nd scan (or 1st for that matter) Your offset and level probably isn't high enough to access the static address that you're looking for. 2047 as offset and level 5 is too low to find most of the static addresses in modern games.
I was trying this in an RPG Maker VX game (have to use a custom value type) and I am not finding anything the second scan. Unsure why. Using 4095 and 7. It's odd because the first search only shows up like 3k results and 90% of them are the same address, so I assume always that is the address but when I restart game..nothing. Rescan a second one, comes up blank. Can't figure out what's up.
The addresses are usually the same or very similar. I'd recommend that you try with for example 10 levels and an offset of 2048 to speed up the search, save the file and repeat. It's important do search for the same value each time. When searching for for example health you can get different values where only one of them is the dominant. You need to find it by freezing the values and unfreezing a bit at the time. If the wrong value is picked, your pointer scan will turn up blank/invalid. If however you still do not find anything for an offline game, it might be the offset that is too low. Try with 4096, but the longer the offset, the longer your search per file will take
@@hexagon624 I tried all night they never persist; it must be because of it being an RPG Maker VX game? No matter what I do no searches persist after reloading a save or restarting game..always get results 0
@@NewYears1978 I don't know the game/engine. Are you sure it's not handled online? If when searching for the value, does it return multiple values for the same?
Not what I was looking for, but still a solid 10/10 informational video. Any videos on finding static numbers (looking to screw around in solo player flash games), maybe searching the hexes or any easier way? ^^
I'm a bit confused. How is the address of AMMO a static address when it changes when you start up the game again? Don't you mean dynamic address @5:26? Don't you mean the static address of the pointer?
Good video, worked for me. For some reason I couldn't find the pointer for the address by filtering the pointerscan map while creating it, but filtering the map once it was created with the new addresses did the trick. Thanks!
bro, it can be change if that game run on other PC, right? I'm looking for "how to find static address which can be use for other pc"! sorry my English is bad! thank you for your video!
I am getting this error: You will get billions of useless results and giga/terrabytes of wasted diskspace if you do not use the compare results with other saved pointermap option. Are you sure?
Does cheat engine work with emulators. So I use retro arch and wanted to do some stuff with it. I can find the addresses when the game is loaded but when I exit it’s gone so I try and find the offsets and the pointer scan shows no results every time.
is it possible that old games doesn't support pointers at all? I'm speaking about old NES games, like for instance "the legend of zelda" or "super mario bros". I've seen their memory it's super compressed compared to modern games. thanks for your reply
hi ! i am trying to find the static address for pes2021,but i always get zero list when i rescan memory with a new dynamic address.do you know the reason for this weird situation?
Pls I need help....I can’t find any addresses at all? I do the scan, and nothing...it’s literally driving me crazy...if anyone can explain what I’m doing wrong, I’d be eternally grateful man
Hello thanks but i have the pointer and the value but if i restart the game the pointer change i cant use the address is my code of they keep change any help?
About teleport hack, I made pointers successfully but when I use hotkey to set value to the coordinates I want, it teleports me to other position, or doesn't even teleport me somewhere, also the pointer stop working after some time by the time i made it (I freeze the x y z pointers and won't freeze my position)
i find the pointer leading to the static address and after i restart my game it works for a few minutes and then stops working or stops working on the 3rd time i restart
How would you search in a game for characters which are randomly Drops after finished a Level? Or how would you Look for character in a game which one is purchasable?
Whenever I close the game or load from a privious point and reattach the game to cheat engine , it says scan error:thread 0:access violation at address 004A673F in module 'Cheat Engine.exe'.Write of address 00000000. Coz of this I can't scan the pointer more than a single time.
EveryThing Rare you have to use a modified binary version of cheat engine. Basically edit the hex , name, process Id etc. Depends on what the anti cheat is looking for
OK that works but it doesnt give me the pointer address or whatever... i can only use the pointer in cheat engine but how do i get the hex value that i can use in memory writing? for example in c++ you can hook into a process and edit the value of a particular address but in cheat engine i csnt get address, it onlt shows P->(dynamic address)
@@Денис-ч1э6б you have to get the base address first, and then add the offset you get from cheat engine, and thats the pointer you write to from C++ (at least I think)
hi there I wanted to know if it s possible to hack Origins TMNT from ludia games, I just wanna know if i can duplicate VS points, I ve hacked all values already just I am still missing that value and the diamond shards value as well, u think u could take a look a bit and possibly tell me if it s possible or not at all.. thanks !
Yes it works multiple PCs. That’s what pointers do - they point to a static address (an address that never changes, regardless of the computer it’s on).
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
Anyone, correct me if I'm wrong, but... % aren't actually saved as "%" in memory. Usually %s in games are just a number and "%" is added on the display. So for example, if you have a spaceship and the GUI shows, that you've 35% of the shields left, it means, that it is saved as 35. So GUI has this template: [value of ship's shield] + "%". Sometimes it can be a ratio, so other values are stored in memory and before it is shown to the screen, computer calculates: value1/value2 * 100. ("%" is still added only on the display). So, in short, computers don't really understand %s, it has no meaning for them, so they just store the number before the %. And how to find it? Just look for a number without the "%". Try changing value type to "All". It takes longer, but finds all possible addresses. Sometimes %s are calculated like in the 2nd scenario (value1/value2) and changing just the displayed value won't help that much. What then? Well... you have to find at least value1. It all depends on app / game. I hope I've helped! I know it's been 4 months, but I can't just leave a comment without an answer, if I know it or part of it haha
Sphinx you may need to find a "more reliable" pointer. Some of them work some of them time and some don't. Also, if the other PC is 32-bit and you found the addresses on a 64-bit PC, that may play a role as well. Also game version matters so because some may have patches and some won't (assuming it's the same game just different versions)
Guided Hacking I was thinking it didn't, but wasn't for sure as I know the assembly is different for different architectures. Glad you hear from you guys though. I'll be back to the channel actively when I'm out of the military soon.
If i hack online game, and i close it or (for exp. spend money) my previuos value was come back...Is this supose to happend, and is it possible to hack game but the hacked value replace the previous one??? Help?
Its likely that the value you intended to modify isn't stored on your pc but in a database of the game and the value you changed was simply one on a GUI/game menu ( so a bit like changing a value when you do 'inspect element' in chrome for example).
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
Hi. Can you help me. I'm searching the first address but i'm getting a total of 4 addressees that are always corresponding to the number i need. I'm searching in 4 Bytes, idk if that helps or not. How do i narrow that down to one address so i can start weeding out the pointer? Thank you
@@officialexploitacademy i find memory address of one app string and browse this memory region and change read and write and edit string but this string not change in application . i found some tutorials that change string value of game as this way. but not work in other desktop apps . why this happen .
Never mind, numbskull confirmed. I shouldnt use 'open' but 'load'... doy. So, I feel like a numbskull, but how do I save this address to a cheat table? If I rename it to HP (which I scanned for), then I save as .CT, if I then close the game and cheat engine and reopen both and open up the .CT file... no address is in the list. It saves nothing. I'm confused.
The problem that I keep getting is after restarting the game, finding the value and then doing a rescan, pointers drops to zero. I'm no programmer, not yet, but I think it's a multi-address, multi-threaded instruction, and I can't seem to get the proper pointer at all.
I found the heath address(which keeps on changing every time when I launch the game), value is 85 when I am in wounded state in the game. full heath is 145. If i change the value to 85 to 145. and activate that value by clicking X in the box. Now resume the game still there is no change in the game. Game: Shanghai Dragon PC Game.
You can have two values: 1. Your actual health 2. (What you probably have) The visual representation of that value. Your health is displayed in game and what your address/offset holds is only the value of what is displayed. This does not effect your real health, if you heal yourself or take damage you will notice that. You will need to find the real address :)
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
THIS ISNT A STATIC ADDRESS!!! Restart ur PC and look again , than share the table with friends and u can see that ISNT a static address! and this game its to easy for find adresses..... use a game with floot values or other ....
Just reload saved game instead of fully restart game work too I guess. Save lot time & trouble. Also, in cheat engine version 5.5(old version), the pointer can be easily scanned from the address found. No need to restart. I'm currently relearning this again. 15 years ago I fully created battle realms trainer for myself. Then never touch cheat engine again until now. Has to restart from basic 😂(i completely forgot everything). Still, I'm sure old version of cheat engine is more convenient than newer 1. Bcoz at least I've tried both v5.5 & v5.8 in the past.
friend, your channel is interesting that I do not like English very much, if it does not bother me I would like to ask you if you used cheat engine in Mu
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
yes, im trying to play around with forest village in example... getting the adresse for wood, stone, fish and so one. every ressource has 3 adresses. example : WOOD on START= 200 . that seems to be 1 adress shown in the "main windows" 1 adress shown in the storage barn/hall 1 adress shown in statistic windows and so on... now.. how to SCAN THIS ? (the 3 adresse are freezable, and when i change all 3 in one time, it works.. but how to build up a private trainer here ? thanks a lot
static address - pointer address = offset pointer address + offset = full pointer calculate it in windows calculator via programmer view and select Hex
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
u could probably make another vid about this topic and call it "2nd method" or smth like that and be like yea this is 2 pro if ur starting out watch this vid instead
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life. ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
intro is too damn loud
thanks for the warning, you saved my life
@@robbyz512 ok dumber
facts lmao my ears
im new subscriber this video almost 5 years and working and tested thank you
There's no harm in closing the pointer scan. You just need to open it up again. The next, for people who can't find values in the 2nd scan (or 1st for that matter) Your offset and level probably isn't high enough to access the static address that you're looking for. 2047 as offset and level 5 is too low to find most of the static addresses in modern games.
I was trying this in an RPG Maker VX game (have to use a custom value type) and I am not finding anything the second scan. Unsure why. Using 4095 and 7. It's odd because the first search only shows up like 3k results and 90% of them are the same address, so I assume always that is the address but when I restart game..nothing. Rescan a second one, comes up blank. Can't figure out what's up.
The addresses are usually the same or very similar. I'd recommend that you try with for example 10 levels and an offset of 2048 to speed up the search, save the file and repeat. It's important do search for the same value each time. When searching for for example health you can get different values where only one of them is the dominant. You need to find it by freezing the values and unfreezing a bit at the time. If the wrong value is picked, your pointer scan will turn up blank/invalid. If however you still do not find anything for an offline game, it might be the offset that is too low. Try with 4096, but the longer the offset, the longer your search per file will take
@@hexagon624 I tried all night they never persist; it must be because of it being an RPG Maker VX game? No matter what I do no searches persist after reloading a save or restarting game..always get results 0
@@NewYears1978 I don't know the game/engine. Are you sure it's not handled online? If when searching for the value, does it return multiple values for the same?
@@hexagon624 I never figured it out I just had to rescan every time. Shrug.
this never works for me it gives me 0 results
try the newest CE, and dont use the one for 86 or 64. use the one that doesnt have any extra part to the name.
@@bredmond812 doesnt work
Thanks for this video. Tons of other videos explaining this and this one was the most straight forward and easy to follow and it worked. Subbed.
THANK YOU VERY MUCH YOU ARE THE BEST ❤❤❤❤❤❤❤❤ +1 SUB
"Make sure to not close out on this by the way"
Me who closed out 5 minutes before he said that....
Not what I was looking for, but still a solid 10/10 informational video. Any videos on finding static numbers (looking to screw around in solo player flash games), maybe searching the hexes or any easier way? ^^
Thank you buddy. That means alot for a small RUclipsr like myself.
Thanks for the video, dude! I made a universal freeze of the increasing timer in one of the games.
I'm a bit confused. How is the address of AMMO a static address when it changes when you start up the game again? Don't you mean dynamic address @5:26? Don't you mean the static address of the pointer?
Good video, worked for me. For some reason I couldn't find the pointer for the address by filtering the pointerscan map while creating it, but filtering the map once it was created with the new addresses did the trick. Thanks!
Glad I could help. Enjoy your day!
When I scan for pointers, I get nothing? Any idea what's wrong?
i have no idea why but pointer have 0 lol but change the dynamic value does work
Big up on the quality of the tutorial :)
people you dont have to hear him in this video just look at the process thats all and it works...really. thx dude for this vid.
bro, it can be change if that game run on other PC, right? I'm looking for "how to find static address which can be use for other pc"! sorry my English is bad! thank you for your video!
I am getting this error: You will get billions of useless results and giga/terrabytes of wasted diskspace if you do not use the compare results with other saved pointermap option. Are you sure?
it's not a error /fp
Does cheat engine work with emulators. So I use retro arch and wanted to do some stuff with it. I can find the addresses when the game is loaded but when I exit it’s gone so I try and find the offsets and the pointer scan shows no results every time.
is it possible that old games doesn't support pointers at all? I'm speaking about old NES games, like for instance "the legend of zelda" or "super mario bros". I've seen their memory it's super compressed compared to modern games. thanks for your reply
Pointers are basically locations in memory. So unless the NES doesnt have a memory module then the answer to ur question is no 😂
It doesen’t work, the process is keeping changing
u got the wrong adcress
hi ! i am trying to find the static address for pes2021,but i always get zero list when i rescan memory with a new dynamic address.do you know the reason for this weird situation?
Pls I need help....I can’t find any addresses at all? I do the scan, and nothing...it’s literally driving me crazy...if anyone can explain what I’m doing wrong, I’d be eternally grateful man
Hello thanks but i have the pointer and the value but if i restart the game the pointer change i cant use the address is my code of they keep change any help?
About teleport hack, I made pointers successfully but when I use hotkey to set value to the coordinates I want, it teleports me to other position, or doesn't even teleport me somewhere, also the pointer stop working after some time by the time i made it (I freeze the x y z pointers and won't freeze my position)
i find the pointer leading to the static address and after i restart my game it works for a few minutes and then stops working or stops working on the 3rd time i restart
but when you open the game again the adres i diferent p-> different... why ? where is the static one to copy and use in vb ? thanks
How would you search in a game for characters which are randomly Drops after finished a Level? Or how would you Look for character in a game which one is purchasable?
doesn t work adress is still changing every time when i close game. what can i do?
Bro in android games it's is a similiar process or change?
thanks, dude!
this helped me create an ultrawide patch lol.
how do u search for it without cheat engine example for a game console in respect to pointer which don't are available on other engines
Dude, your background music is louder than your voice in the second half of the video. Almost made this video useless
It wasn't clear enough. Should i believe my luck and try couple of codes from millions of codes?
Whenever I close the game or load from a privious point and reattach the game to cheat engine , it says scan error:thread 0:access violation at address 004A673F in module 'Cheat Engine.exe'.Write of address 00000000. Coz of this I can't scan the pointer more than a single time.
my only question is how do you find a pointer in a game with an anti cheat where you will be banned for using cheat engine
EveryThing Rare you have to use a modified binary version of cheat engine. Basically edit the hex , name, process Id etc. Depends on what the anti cheat is looking for
does not appear to me "Keep the current address list / code list?"
Can you show me how to manipulate the Starcraft II values?
I found everything except mineralz / gas.
Realy hard to get the stack/pointers from it
Yah i got them all but they still have the values of ????? after restarting game
Now you are my master thx
how to find draw distance or render distance parameter address use cheat engine for any games ?
How to find on online game? Coz i have much try, but the pointer is not found when i re scan.
Don't cheat in online games.
OK that works but it doesnt give me the pointer address or whatever...
i can only use the pointer in cheat engine
but how do i get the hex value that i can use in memory writing?
for example in c++ you can hook into a process and edit the value of a particular address
but in cheat engine i csnt get address, it onlt shows P->(dynamic address)
Did you figure it out?
Nope, I guess you can only use these pointers in cheat engine.
@@Денис-ч1э6б you have to get the base address first, and then add the offset you get from cheat engine, and thats the pointer you write to from C++ (at least I think)
I did this on health, but it works on other entities too. How do I fix it?
nvm it was easy fix
hi there I wanted to know if it s possible to hack Origins TMNT from ludia games, I just wanna know if i can duplicate VS points, I ve hacked all values already just I am still missing that value and the diamond shards value as well, u think u could take a look a bit and possibly tell me if it s possible or not at all.. thanks !
Is this work on mutant genetic gladiators?
best easy tut i have ever scene about pointers thanks my friend and have a nice day.
Can someone answer me ? Does this pointerscan work on another pc / other people game or instead it just work for our own pc / game.
Yes it works multiple PCs. That’s what pointers do - they point to a static address (an address that never changes, regardless of the computer it’s on).
@@officialexploitacademy thanks a lot for your reply. I appreciate it :D
how can I save the modded money to my game so when I restart it than I dont have to use cheat engine again
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life..
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
Thats not what i was searching for but nondeles pretty good. BTW how do i find the values of % lets say i want to change 3% to 5%
Anyone, correct me if I'm wrong, but...
% aren't actually saved as "%" in memory. Usually %s in games are just a number and "%" is added on the display. So for example, if you have a spaceship and the GUI shows, that you've 35% of the shields left, it means, that it is saved as 35. So GUI has this template: [value of ship's shield] + "%".
Sometimes it can be a ratio, so other values are stored in memory and before it is shown to the screen, computer calculates: value1/value2 * 100. ("%" is still added only on the display).
So, in short, computers don't really understand %s, it has no meaning for them, so they just store the number before the %.
And how to find it? Just look for a number without the "%". Try changing value type to "All". It takes longer, but finds all possible addresses.
Sometimes %s are calculated like in the 2nd scenario (value1/value2) and changing just the displayed value won't help that much. What then? Well... you have to find at least value1. It all depends on app / game.
I hope I've helped!
I know it's been 4 months, but I can't just leave a comment without an answer, if I know it or part of it haha
The problem I've been getting for a long time is that the pointers don't actually work on a different pc. I've tried and it doesn't work lol.
Sphinx you may need to find a "more reliable" pointer. Some of them work some of them time and some don't. Also, if the other PC is 32-bit and you found the addresses on a 64-bit PC, that may play a role as well. Also game version matters so because some may have patches and some won't (assuming it's the same game just different versions)
Guided Hacking I was thinking it didn't, but wasn't for sure as I know the assembly is different for different architectures. Glad you hear from you guys though. I'll be back to the channel actively when I'm out of the military soon.
I can not figure out cheat engine with yuzu any tutorials please, thank you.
If i hack online game, and i close it or (for exp. spend money) my previuos value was come back...Is this supose to happend, and is it possible to hack game but the hacked value replace the previous one???
Help?
Its likely that the value you intended to modify isn't stored on your pc but in a database of the game and the value you changed was simply one on a GUI/game menu ( so a bit like changing a value when you do 'inspect element' in chrome for example).
@@darkprinslau Thank you for info, I know more now. And yes my value is on the gui menu ing
Thank for clearly videos :)
is that possible to see the static memory address without cheat engine?
Certainly. You can do it in almost every programming language out there. Just google "How to read memory" + whatever programming language you'd like.
your video intro demo sound too loud
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
this one should be in Cheat Engine main tutorial
thanks for the tutorial but my pointer scan screen (after I name the pointer) is blank 1:41
Hi. Can you help me. I'm searching the first address but i'm getting a total of 4 addressees that are always corresponding to the number i need. I'm searching in 4 Bytes, idk if that helps or not. How do i narrow that down to one address so i can start weeding out the pointer?
Thank you
can find any desktop app memory by this cheat engine?
Yes
@@officialexploitacademy i find memory address of one app string and browse this memory region and change read and write and edit string but this string not change in application . i found some tutorials that change string value of game as this way. but not work in other desktop apps . why this happen .
i have for only game bypass but dont finde weapon dmg
Never mind, numbskull confirmed. I shouldnt use 'open' but 'load'... doy.
So, I feel like a numbskull, but how do I save this address to a cheat table? If I rename it to HP (which I scanned for), then I save as .CT, if I then close the game and cheat engine and reopen both and open up the .CT file... no address is in the list. It saves nothing. I'm confused.
is there any alternative way without wasting time and effort
I love this
i did pointer scan but found 0 values please help
NR KILLER did you close assault cube then do the second ptr scan cause that happens to me
The problem that I keep getting is after restarting the game, finding the value and then doing a rescan, pointers drops to zero. I'm no programmer, not yet, but I think it's a multi-address, multi-threaded instruction, and I can't seem to get the proper pointer at all.
Retro Gamer do they read 0 or "????". Interesting, I never had this issue.
The pointer paths = 0 in the pointer scan window, after rescan with new address. I'm trying to make a table for Simcity Offline mode.
Retro Gamer watch my video on data types. It might help. You might have to adjust your scan settings. Good luck man
if youre on a 64bit pc you should make sure the scan isnt limited to 32bit ptrs
I found the heath address(which keeps on changing every time when I launch the game), value is 85 when I am in wounded state in the game.
full heath is 145.
If i change the value to 85 to 145. and activate that value by clicking X in the box. Now resume the game still there is no change in the game. Game: Shanghai Dragon PC Game.
@[ミスティック]クッキー how to resolve it
You can have two values:
1. Your actual health
2. (What you probably have) The visual representation of that value. Your health is displayed in game and what your address/offset holds is only the value of what is displayed. This does not effect your real health, if you heal yourself or take damage you will notice that. You will need to find the real address :)
How do you save the address?
Very good video
Thank you very Much !
can you help me?
Good tutorial
Thankyou
Thank you
How do I use it in another pc
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
THIS ISNT A STATIC ADDRESS!!! Restart ur PC and look again , than share the table with friends and u can see that ISNT a static address! and this game its to easy for find adresses..... use a game with floot values or other ....
Just reload saved game instead of fully restart game work too I guess. Save lot time & trouble. Also, in cheat engine version 5.5(old version), the pointer can be easily scanned from the address found. No need to restart.
I'm currently relearning this again. 15 years ago I fully created battle realms trainer for myself. Then never touch cheat engine again until now. Has to restart from basic 😂(i completely forgot everything). Still, I'm sure old version of cheat engine is more convenient than newer 1. Bcoz at least I've tried both v5.5 & v5.8 in the past.
On Assassin's Creed Black Flag didn't work
what about the online games ? value is unchanged is there way to change it ?
Thanks a lot dude
tyvm sir
thanks im able to find the static address i want.
Buen video saludos desde Argentina
Alejandro Izaguirre gracias!
hablas español?
friend, your channel is interesting that I do not like English very much, if it does not bother me I would like to ask you if you used cheat engine in Mu
Alejandro Izaguirre yo no habla Espanol. I just know a little bit from college Jaja. But I wish I could help you better
I also do not write in English but for that is the google translator, will you have any means of contact like facebook or email?
how to write it in c++ ?
Easy
In my channel.
Guys how can I bypass EAC, when I search for adresses it says something like no memory found :(
which game? you need turn down eac to scan.
@@Cesarmtodoido Block n load, how do I turn that down?
@@BlathoPlay idk how disable it for this game, go in UnkownCheats search there.
@@Cesarmtodoido ok thx
How do I scan the emotes in a League of Legends game?
Thanks a lot. Videos are very useful
know way to do this lol have a strong anti cheat
bro you have any discord server
nope
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
this game is to easy.... my game is difficult to find basepointer
surviving mars
Wow thank you
como sacaria el address estatico de esa pointer?
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life..
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
Informative
thanks now i have unlimited money lol
i want finde weapon dmg
this doesnt work if your first scan has 3 or more result
yes, im trying to play around with forest village in example... getting the adresse for wood, stone, fish and so one. every ressource has 3 adresses. example : WOOD on START= 200 . that seems to be 1 adress shown in the "main windows" 1 adress shown in the storage barn/hall 1 adress shown in statistic windows and so on... now.. how to SCAN THIS ? (the 3 adresse are freezable, and when i change all 3 in one time, it works.. but how to build up a private trainer here ? thanks a lot
Thanks
How do i get the offset ?
Did you figure that out?
static address - pointer address = offset
pointer address + offset = full pointer
calculate it in windows calculator via programmer view and select Hex
This helped a little bit too much, +1 Sub Gained
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-
how about just remove the music man be better then that .
help me please...
good
Tried it like he said, not recommended, so its useless. Hate me but im telling the truth.
this method takes ages tbh
Crave 4 More I'm aware of the other methods, however this is the easiest for beginners because it is only like 3 steps
u could probably make another vid about this topic and call it "2nd method" or smth like that and be like yea this is 2 pro if ur starting out watch this vid instead
FINDING POINTERS HERES ANOTHER VIDEO
@qISI
My friends, please search for your life purpose, why are we here?? I advise you to watch this series 👇 as a beginning to know the purpose of your existence in this life.
ruclips.net/p/PLPqH38Ki1fy3EB-8xmShVqpbQw99Do2B-