Hi Brian, love your enthusiasm, I have the red and yellow version and it's a great heli. When the bright sun hits the canopy it just glows. I've been flying in +1 and +2 and found this heli to be super stable in every way. The power is up there, and flight times are strong. A well designed and well built 200 size heli. I'm also using the GooSky T8 transmitter that comes with the RTF. It works very well with this heli. The whole set up is worth the money!
Hello again Mr Phillips. When using a heli, and the throttle curves, one you turn off throttle hold the heli will immediately spool up because on your curves, the very first value is 60%. Therefore the heli will spool up. One fix is ESC calibration. The other good idea is to make the very first value 0%, then jump up to 60% for the remaining first throttle curve.
These are the channels that bring new folks into the hobby. Fun presentation and a myriad of stuff. I just wanted to say thanks because your channel is one I always review before making purchases. Without fail, you have reviewed said item of interest. Wish I could have a collection like yours but hats off to you and teammate for sharing yours with us.
I heard you say you had no clicks of trim. Just a friendly tip from a rc heli pilot, you never use trim on a flybarless heli! Instead you would mechanically adjust your swashplate to perfectly level when the servos are centered. Its actually common practice to turn off trim adjustment in your radio so you don't accidentally hit it by mistake. Love the videos Brian and camera crew! When I first started with planes I used your channel as a crutch and it helped me tons!
Thanks for the help! These are the things I kinda "know" but never remember in the heat of a flight, since I fly fixed wing primarily. It also doesn't help that these cheap Chinese helis we find ourselves playing with all the time DO trim like a plane, reinforcing an already bad habit - LOL
@@BrianPhillipsRC to be honest I just use a reg spektrum sat. Normally there's a small adapter if needed. I'll have my M2 Evo today for review so I'll see how it goes.
We tried to come up with a link, but couldn't with any of our existing affiliates. We also were going to recommend LemonRx, but same issue. Tell your people to hit us up so we can add their links on the video ;)
They are a lot cheaper now than $30. Just bought two one for my M1 and the other for my Goosky S1. Current price is $20. Highly recommend when using a Spectrum transmitter.
Just a snippet of this heli's description on Banggood 😂😂 brian u should get a kick out of this "the second layer of the fuselage is connected, and the fried chicken can be repaired when it is broken, so as to reduce the cost of helicopter bombers;"
WOW Megan and I just had to look it up - simply amazing ;) Why don't they just hire an English speaking person to proof their documents...I mean, think of the money they're spending to make the CNC aluminum parts?!??! It's gotta cost a fortune!!! ...well, at least it's good for a laugh!!!
Hey Brian, Thanks for all your vids. Keep up the great work. Could you add the link to where you found the instruction for the BNF set up. Thanks again.
Im Heli shopping er again but, I think I should probably take your advice and start with a plane? I pushed my last 450 heli too high, an updraft got ahold of it and umm left our atmosphere hahaha It was spotted on a roof 2 towns over on a roof in Boston.. LoL truth.. Of course I showed up with a ladder and grabbed it hahaha.. BTW I enjoy this channel.. Great work! Love the interaction with "camera crew". LoL Incidentally the "crew" always has an amazing, top notch manicure.. ;) So plane first? Thanks Brian.. Great channel...
Hallo Baby flyer, great review! You should be able to compare the OMPHobby V2 (Evo) with the Go- o-sky. Would be interesting what your preference is (..)
Have owned them both it's no contest. The S2 is much more stable and responsive. On a different level. Omp need to upgrade that FBL that's where Goosky are way ahead
Thank you for catching that!! We really appreciate you bringing it to our attention. We missed a space in the link. :) This one should work... bit.ly/3T73eS3
Goood videoo! I have alsoo had a prooblem with throotle cut oon a oone oof my planes and strangely foound that when I have throotle cut oon when I plug in the battery the throotle dooes noot return too zeroo when throotle cut is turned ooff.
Hey Brian did your serial receiver have a bind button on it , my 4 wire does but my 3 wire does not and it won't bind . I don't have a receiver I can plug it into to bind it to first and plug it into the heli after binding it to my nx8 ,? It didn't looked like you did anything but use your transmitter to bind it .
Okay, great quesiton - to be somewhat fair, the Goosky is quite a bit MORE expensive (especially if you have to add a Spektrum Serial Rx), BUT it's better. I love them both, and really love the simplicity of the BNF InFusion 180, and there's something about that size too - just perfect if you're going to fly INDOORS, since it's a bit smaller, but the Goosky is hand down - Better. I'd love to say it's not, but it's just amazing! Here's my issue - and same with 100% of the Chinese brands...when you crash, can you get parts? I can't say you won't, but also, they included a bunch with this heli!!!! BUT when push comes to shove, Horizon Hobby will have parts more often than not. Two cents. S2 bit.ly/3T73eS3 BNF | bit.ly/3Cnf98g RTF Rx bit.ly/3OPAUQG | amzn.to/3jIsgGz (Similar) NX8 bit.ly/3J05xSj VS 330S bit.ly/3cuZU2c 230S bit.ly/3yX2vJP 150S bit.ly/3OmmtUb Infusion 180 bit.ly/3v2rsTe
S2 bit.ly/3T73eS3 BNF | bit.ly/3Cnf98g RTF Rx bit.ly/3OPAUQG (New option that is correct according to Horizon Hobby) | amzn.to/3jIsgGz (Similar - knock off brand) NX8 bit.ly/3J05xSj
38:02. It's funny, I hear your chargers in the background and have to ask myself if I turned all mine off lol 40:10.. Someday, yer gonna have to tell us how to get to that "Legacy Keyboard" you use there. The other one's SO annoying!!
1) LOL 2) You go to FUNCTION LIST > SYSTEM SETUP > PREFERENCES > (Then it says "Visual Preferences") > KEYBOARD - Legacy needs to be selected to use the "Old, but much better style keyboard"
@@BrianPhillipsRC SWEET!! Thanks! I'm thinking about one of these helis. Got myself the little S-1 and am SUPER impressed by how stable it is. Also have an NX-8 as well. Great for me as I'm sort of a newbie.. Even though I used to fly my Thunder Tiger Raptor 30 way back when. All this new tech makes it a lot easier!
No I might have already bound that Rx previously....or if I recall correctly, didn't I have to use another Rx to bind it? Sorry, it's been a bit since we did this.
All you have to do is just change the mode back and it'll auto-level. We showed how to setup the modes on switch B if I recall. Is there a more robust "Panic" mode you're referring too?
How did u get the heli in bi ding mode? I have same sat receiver and when I turn on it's not in bind mode. There is a bind button on side of the controller but didn't work either.
@@BrianPhillipsRC That's funny, yeah I saw that at ruclips.net/video/NjU-JMTZlNc/видео.html but my satellite doesn't go into bind mode just by powering on the heli and clicking bind on my dx18. I saw you do it though
Out of the box it's really to much for a beginner! So is there any way to tame it down, with the stock radio it comes with? And what would the setting be? Thank you
Sorry, I remember making that mistake, and it was just my bad - I have a real hard time keeping the names of these heli's straight. There's no rhyme or reason for their names, in most cases.
How many other people just wanted it to spool up? Can't understand why you didn't take the time to remove the blades. I hope some young kid doesn't try this and it spools up on them. Great video but, be a little safer when teaching other people you are the example so, set the bar a little higher. Thanks again.
Hi Brian, love your enthusiasm, I have the red and yellow version and it's a great heli. When the bright sun hits the canopy it just glows. I've been flying in +1 and +2 and found this heli to be super stable in every way. The power is up there, and flight times are strong. A well designed and well built 200 size heli. I'm also using the GooSky T8 transmitter that comes with the RTF. It works very well with this heli. The whole set up is worth the money!
the Ready to fly radio that comes with the S2 and S1 they work great right out of the box some of the best helis on the market
Hello again Mr Phillips. When using a heli, and the throttle curves, one you turn off throttle hold the heli will immediately spool up because on your curves, the very first value is 60%. Therefore the heli will spool up.
One fix is ESC calibration. The other good idea is to make the very first value 0%, then jump up to 60% for the remaining first throttle curve.
These are the channels that bring new folks into the hobby. Fun presentation and a myriad of stuff. I just wanted to say thanks because your channel is one I always review before making purchases. Without fail, you have reviewed said item of interest. Wish I could have a collection like yours but hats off to you and teammate for sharing yours with us.
I heard you say you had no clicks of trim. Just a friendly tip from a rc heli pilot, you never use trim on a flybarless heli! Instead you would mechanically adjust your swashplate to perfectly level when the servos are centered. Its actually common practice to turn off trim adjustment in your radio so you don't accidentally hit it by mistake. Love the videos Brian and camera crew! When I first started with planes I used your channel as a crutch and it helped me tons!
Thanks for the help! These are the things I kinda "know" but never remember in the heat of a flight, since I fly fixed wing primarily. It also doesn't help that these cheap Chinese helis we find ourselves playing with all the time DO trim like a plane, reinforcing an already bad habit - LOL
@@BrianPhillipsRC Happy to help you out since youve helped me out countless times! Happy flying
You the man you remind me so much of Jack Black you could be his brother I learned so much from you keep doing what you do
Thanks! Maybe some day Jack will come back to the family, where he belongs - LOL LOL LOL ;)
Just a tip. I take apart the RX and use o the insides for the RX. It's light and smaller
Good idea! I should do this too! I've done it before, but didn't even think about this.
Can I use the UART for SRXL2??? (4 wires)
@@BrianPhillipsRC to be honest I just use a reg spektrum sat. Normally there's a small adapter if needed. I'll have my M2 Evo today for review so I'll see how it goes.
Thank You!!!! For the always great reviews:
Glad you like them! Thanks!
I really like the way that GOO FLEW. Lol Looks nice as my m2.
I accidentally said M2 (like throughout the whole video!!! - OOOOOPS :)
I get the kensun dsmx satellite receivers they’re smaller and they have a bind button. They are only 30$ too I run them on all my helis
Alot better too
We tried to come up with a link, but couldn't with any of our existing affiliates. We also were going to recommend LemonRx, but same issue.
Tell your people to hit us up so we can add their links on the video ;)
Ive had good luck with them on my m1 and m2
They are a lot cheaper now than $30. Just bought two one for my M1 and the other for my Goosky S1. Current price is $20. Highly recommend when using a Spectrum transmitter.
You can never have enough shafts in your flying rc products lol 😂! Goosky looks amazing especially the canopy! #stayepic
Just a snippet of this heli's description on Banggood 😂😂 brian u should get a kick out of this
"the second layer of the fuselage is connected, and the fried chicken can be repaired when it is broken, so as to reduce the cost of helicopter bombers;"
SERIOUSLY - WOW!!! BEST Chinese translation EVVVVVEEEEEER!
WOW Megan and I just had to look it up - simply amazing ;)
Why don't they just hire an English speaking person to proof their documents...I mean, think of the money they're spending to make the CNC aluminum parts?!??! It's gotta cost a fortune!!!
...well, at least it's good for a laugh!!!
@@BrianPhillipsRC hahaha right!
Hey Brian, Thanks for all your vids. Keep up the great work. Could you add the link to where you found the instruction for the BNF set up. Thanks again.
very cool, thank you guys.
You're welcome G Bro!
Looks good ,,,man's I bet your really killing it on them helicopters by now
not really - LOL ;)
Goo sky helis apparently now ship with an invisibility cloak! When camnera crew asked "really" I laughed for the second time in this vid.
Im Heli shopping er again but, I think I should probably take your advice and start with a plane? I pushed my last 450 heli too high, an updraft got ahold of it and umm left our atmosphere hahaha It was spotted on a roof 2 towns over on a roof in Boston.. LoL truth.. Of course I showed up with a ladder and grabbed it hahaha.. BTW I enjoy this channel.. Great work! Love the interaction with "camera crew". LoL Incidentally the "crew" always has an amazing, top notch manicure.. ;) So plane first? Thanks Brian.. Great channel...
phillips the gooey looks good. I am still waiting on the Yuxiang 180 V2...aka the Eachine E180 V2. Hopefully should be here in the next month or two..
That would be a nice one to do, in fact!
I like your lampshade
LOL
5:00.. Brian...Say, "Motorcycle"..... lol ;)
Nice looking heli,going to have to get one,could you please tell me how you made the adapter for the charger? Thank you sir
Hello Brian,the elicopter Green,great🔝🏆🏆🏆🏆🏆im lovit Green
Hey, thanks!
Great Video! So, who wins: OMP M2 EVO or S2 Legend?
S2 Legend
That thing looks sick! I may need one. Lol.
I love your enthusiasm. Liked and subscribed. If you're ever in Ohio, let's fly!
Thanks! Love doing this stuff, and hope we can help others to find themselves immersed in this wonderful hobby as well!
@@BrianPhillipsRC I'm AMA #L-1337... BEEN flying since 1975. Helicopters since 2008. This hobby keeps me sober! Haha
Hallo Baby flyer, great review! You should be able to compare the OMPHobby V2 (Evo) with the Go- o-sky. Would be interesting what your preference is (..)
Have owned them both it's no contest. The S2 is much more stable and responsive. On a different level. Omp need to upgrade that FBL that's where Goosky are way ahead
The BNF link in your description is bad, but what a cool little helicopter that's packed full of features.
Thank you for catching that!! We really appreciate you bringing it to our attention. We missed a space in the link. :) This one should work...
bit.ly/3T73eS3
Goood videoo! I have alsoo had a prooblem with throotle cut oon a oone oof my planes and strangely foound that when I have throotle cut oon when I plug in the battery the throotle dooes noot return too zeroo when throotle cut is turned ooff.
Hey Brian did your serial receiver have a bind button on it , my 4 wire does but my 3 wire does not and it won't bind . I don't have a receiver I can plug it into to bind it to first and plug it into the heli after binding it to my nx8 ,? It didn't looked like you did anything but use your transmitter to bind it .
Came here for this same question. Would like to bind to spektrum satellite, but don’t have a receiver.
How would you compare the Goosky to the Blade InFusion 180 (BNF) in terms of construction and ease of flying????
Okay, great quesiton - to be somewhat fair, the Goosky is quite a bit MORE expensive (especially if you have to add a Spektrum Serial Rx), BUT it's better. I love them both, and really love the simplicity of the BNF InFusion 180, and there's something about that size too - just perfect if you're going to fly INDOORS, since it's a bit smaller, but the Goosky is hand down - Better. I'd love to say it's not, but it's just amazing!
Here's my issue - and same with 100% of the Chinese brands...when you crash, can you get parts? I can't say you won't, but also, they included a bunch with this heli!!!! BUT when push comes to shove, Horizon Hobby will have parts more often than not.
Two cents.
S2 bit.ly/3T73eS3 BNF | bit.ly/3Cnf98g RTF
Rx bit.ly/3OPAUQG | amzn.to/3jIsgGz (Similar)
NX8 bit.ly/3J05xSj
VS
330S bit.ly/3cuZU2c
230S bit.ly/3yX2vJP
150S bit.ly/3OmmtUb
Infusion 180 bit.ly/3v2rsTe
@@BrianPhillipsRC Thank You!!!!😀
How did you bind a spektrum satellite without a receiver? I thought you needed to use a seperate receiver to bind a spektrum satellite???
Nope, you can bind it without. I think there may have been a time in the last generation where that was necessary.
@@BrianPhillipsRCwhat model satellite are you using here?
Question: what is the purpose of the remote receiver you have linked?
Disclosure I’m only 12 min in. Lol. I will have to see if my question is answered in the build part.
Hi this is Paul...can u tell what receiver u used for the goosky I it's spektrum but can u tell me the model of receiver
S2 bit.ly/3T73eS3 BNF | bit.ly/3Cnf98g RTF
Rx bit.ly/3OPAUQG (New option that is correct according to Horizon Hobby) | amzn.to/3jIsgGz (Similar - knock off brand)
NX8 bit.ly/3J05xSj
Try Flying the SAB Goblin Fireball Heli. It is similiar in design because it also has NO Main Gear.
38:02. It's funny, I hear your chargers in the background and have to ask myself if I turned all mine off lol
40:10.. Someday, yer gonna have to tell us how to get to that "Legacy Keyboard" you use there. The other one's SO annoying!!
1) LOL
2) You go to FUNCTION LIST > SYSTEM SETUP > PREFERENCES > (Then it says "Visual Preferences") > KEYBOARD - Legacy needs to be selected to use the "Old, but much better style keyboard"
@@BrianPhillipsRC SWEET!! Thanks! I'm thinking about one of these helis. Got myself the little S-1 and am SUPER impressed by how stable it is. Also have an NX-8 as well. Great for me as I'm sort of a newbie.. Even though I used to fly my Thunder Tiger Raptor 30 way back when. All this new tech makes it a lot easier!
I noticed you didn’t Have to bind it to another spektrum receiver first? Did you have to use the bind button on the goosky?
No I might have already bound that Rx previously....or if I recall correctly, didn't I have to use another Rx to bind it? Sorry, it's been a bit since we did this.
@@BrianPhillipsRC I may have missed it, no worries, I got it now. Thank You for getting back. Happy Flying.
Do you know how to make bailout setup on Spektrum pleaae ?
All you have to do is just change the mode back and it'll auto-level. We showed how to setup the modes on switch B if I recall.
Is there a more robust "Panic" mode you're referring too?
Can i charge the batteries on my new Aero Scout the night before i plan to fly without damaging them.
Is this slightly bigger than an OMP M2 EVO or the same Size? Thanks in advance.
yes super similar in size and quality
the S2 is a little bigger
How did u get the heli in bi ding mode? I have same sat receiver and when I turn on it's not in bind mode. There is a bind button on side of the controller but didn't work either.
We show what we did. The RADIO SETUP part is at the end ;)
@@BrianPhillipsRC That's funny, yeah I saw that at ruclips.net/video/NjU-JMTZlNc/видео.html but my satellite doesn't go into bind mode just by powering on the heli and clicking bind on my dx18. I saw you do it though
@@BrianPhillipsRC so the receiver you used is not the same as the receiver you linked to in the description.
👍
Thanks!
Just for the record it's gooooo- sky. 😂
Well, when the Chinese come up with a new name, we often hear about it for the first time, and nobody has decided these things yet... my appologies
@@BrianPhillipsRC keep saying it wrong it's freaking funny 🤣...... you have a good thing going here 👍
How long do the batteries last on this?
Out of the box it's really to much for a beginner!
So is there any way to tame it down, with the stock radio it comes with?
And what would the setting be?
Thank you
You can go in the fbl unit with the bluetooth adapter and adjust the servo speed, agility and gyro +++
Is there anything you can't fly???
yes - But I'd give it a shot anyway ;)
I think it’s Goo (as in Goo not Go) and Sky as in the sky lol
Thanks Scott - "goo"
you keep saying M2 , I think it is S2. Goosky
Sorry, I remember making that mistake, and it was just my bad - I have a real hard time keeping the names of these heli's straight. There's no rhyme or reason for their names, in most cases.
Thought you had an OMP M2 for a second.
i got it with the radio rtf so this video didnt help much .
You can fix a lot of your radio issues by switching to Futaba.
How many other people just wanted it to spool up? Can't understand why you didn't take the time to remove the blades. I hope some young kid doesn't try this and it spools up on them. Great video but, be a little safer when teaching other people you are the example so, set the bar a little higher. Thanks again.
吵死 嘴巴不累嗎