Thank you for this video. I have an m6535cidn that is printing lines and dots in uniform patterns on the paper. I suspect the drum units require cleaning, what should be used to clean these?
Thanks for replying! I realize that this video is several years old. I appreciate that. I have a customer with this model. The yellow lever is sticking when you either unlock or try to lock it back. There is also a tech bulletin regarding the black drum making lines. That the reason I had to take it out. This happened twice even with the new Drum that Kyocera made to fix the problem.
C4600: LSU cleaning motor error 1.Executing the Laser Scanner Cleaning 2. The LSU cleaning drive gear or the cleaning spiral does not smoothly rotate due to the load 3. Clean the LSU cleaning drive gear and the cleaning spiral, and then apply grease to these parts. 4. The LSU cleaning drive gear or the cleaning spiral is deformed or there is a fault in them. 5. Checking the connection ; The connector is not properly connected or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • LSU cleaning motor to Engine relay PWB. 6. Firmware upgrade ; if The firmware is not the latest version, Upgrade the engine firmware to the latest version
Thanks, this video help me fix a problem.
sama-sama
Thank you for your video it was very helpful !
sama-sama
Terbaik dari sini saya bongkar"
iya, selamat mencoba
Thanks
sama-sama
Thank you for this video. I have an m6535cidn that is printing lines and dots in uniform patterns on the paper. I suspect the drum units require cleaning, what should be used to clean these?
When reinstalling the image belt unit, is it required to push the yellow lever/shutter back toward the rear of the machine?
No need, when the black cartridge is installed, the yellow lever will shift automatically
Thanks for replying! I realize that this video is several years old. I appreciate that.
I have a customer with this model. The yellow lever is sticking when you either unlock or try to lock it back.
There is also a tech bulletin regarding the black drum making lines. That the reason I had to take it out. This happened twice even with the new Drum that Kyocera made to fix the problem.
@@SouthwestKayakFishing Yes, that is the problem with this machine series, to fix it there is a new machine series
Hi thank you so much, can you pelas help me, I want to reset my printer Kyocera ecosys m6630cidn ? And I want also to upgrade the firmware
silahkan klik linknya
Good evening here. I have a problem with the Kyocera color 6635 copier which asked me for code 4600. Frankly I am out of breath
C4600: LSU cleaning motor error
1.Executing the Laser Scanner Cleaning
2. The LSU cleaning drive gear or the cleaning spiral does not smoothly rotate due to the load
3. Clean the LSU cleaning drive gear and the cleaning spiral, and then apply grease to these parts.
4. The LSU cleaning drive gear or the cleaning spiral is deformed or there is a fault in them.
5. Checking the connection ; The connector is not properly connected or the wire is faulty. Clean the terminal of the following wire connectors and
reconnect the connectors. If there is no continuity, replace the wire.
• LSU cleaning motor to Engine relay PWB.
6. Firmware upgrade ; if The firmware is not the latest version, Upgrade the engine firmware to the latest version
1.