Amazing diy woodworking tools || simple woodworking tools homemade
HTML-код
- Опубликовано: 13 фев 2020
- Thanks for watching amazing diy woodworking tools you must see do it yourself and do not waste money.
may be useful..
You have to see other woodworking tools homemade, woodworking tips
• Video
• Simple Circular Saw Cr...
• Simple Woodworking Too...
• Video
Please like, subscribe and share
Subscribe here
/ @masbarlinwoodworking
Merci beaucoup pour la vidéo
Excellent. Drill the 18mm spade bit first on centre, then 6mm after in the centre hole left by spade bit.
Под забивную гайку надо сначало пёркой,а потом сверлом😊
Сэр всё отлично! 👍💯!!!
Should have started with the spade bit
Thank you!
Excelente idea.
Отличная идея!!!
Super. Thanks a lot.
Matias Lucena 19 de Setembro de 2021gostei de ver que o canal voltou e como inscrito fco muito feliz, DEUS o abençoe.
Muy buena idea, gracias.
Saludos desde Quilpue - Chile
thanks you
Great ideas. Minor comment: please tell us and show us upfront what you’re going to do.
Good way to injure your fingers. Use spade bit before the 6mm. These small pieces can catch and spin , fingers don’t make good vices.
Thank you for the advice, sir 🙏
@@masBARLINwoodworking or make yourself a simple drill clamp out of ply wood good pask makes he shows easy to make one :)
Для более точного сверления, подшипник нужно положить на деталь
Fine
Excellent
Thank you! Cheers!
@@masBARLINwoodworking that’s very nice wood working
Siempre hay algo que aprender gracias
A bit strange to drill the counterbore after the main hole - can lead to eccentricity
Excelente video, fabriqué la maquinita y resulta muy super bien. Recomendación a masBARLIN que le saque filo a las brocas. Desde Chile un abrazo a la distancia.
gracias hermano por el consejo 😻😻
Tops abisss
Great Ideas... Please do maintenance on your tools. Also, invest in some clamps.
You have to hit the T nut 100 times to drive it in
that first tool never works that way when you do it with sandpaper. There will be at least 1 mm of room, too much to get a square angle. Better use a chissle.
Tutto li bravo
Nice work , but you shold sharpen your drills, and please be careful with the spade drill it can stuck easily and the you can hurt badly, better clamp the workpiece ;--)
👍👍👍👏👏👏
👍
Very useful and helpful tricks. Thanks for sharing.
T
Pero no esta centrado no? Algo salió mal?
Very good working!
Thank you! Cheers!🙏
08:12 drill is razor sharf xd
Laher ukuran berapa utk mata bor berapa ya mas yg d pake ???
ukurannya ada di awal video nya bro
Nice job. After you drive in the T-Nuts, put some Cyanoacrylate glue (Krazy Glue) on it, it will stop it from loosening.
thank you sir, 👌
I think that spade bit could do with a sharpen👍🏻
oke, thanks bro
Actually I was looking at the amount of movement the spade bit shaft was doing, that along with the blunt/dull bit could mean a lot of tear out happening.
No need , next week he is making one using an old fork and a lollipop stick.
Si si. Pero como vez donde v el agujero. ?
👏🏼👏🏼👏🏼😁👷🏻♀️🙋🏻♀️🇧🇷
amico devi affilare la punta del trapano fa un rumore strano. lei che mestiere fa ?
Hrsx di sertakan jg bhs indonesiax di judul jd lebih byk yg liat 👍👍
Un pochino più veloce no!
On vient de trouver l’inventeur du trusquin......... Alléluia
The tool can be improved to make it more precise and can cut diagonally on both sides. Convenient to accurately align the balance line and improve accuracy
Ahow Me Yyyyyyy.
Pregunta: Si necesito agujerear con una broca más delgada, por ejemplo de 4 milímetros, cómo hacer para que el agujero quede en el centro como en el video, porque la guía donde entra la broca es más grande.
PS. Se necesita una guía de menos grosor. Además en esa no se ve donde iría la raya para el agujero. No sirve eso
Apik rek
Buenisimo el trabajo.
Pero, cortaste las uñas. De verdad que se ve bastante ordinario.
Maybe you should sharpen all your drills from time to time :-))
avec un clinquant ( decoupé dans une boite de conserve ? ) placé entre vis et reglet c'est mieux , sa évite de marquer et abimé le reglet , sinon bonne idée et pas chere .
👌 thanks
Esos trabajos son lindísimos
Aportan muchísimo
A la diferentes culturas y deben sentirse agradecidos por la aportaciones pero esas musicas lo fastidia todo debiera de ser una musicas meno etrenduosa
para que puedan ser mejor asimilado
Con todo el respeto que merecen esos maestros de la enceñanza le pido escussd
на пятой минуте я уснул
.........Thank You very much.....''masBARLIN''....
Thank you too! bang
Amazed the guy still has all his fingers , fool around with a drill it will bite you !!!!?
OMG buy a square
LOL
Why? When i can make one.
And he did WITH a square :-))
I have a combination square that does the same thing. You had to buy the rule. How is this better?
I think he's going to reinvent the wheel next....dont give up the day job (if you have one)
Isn't number one a simple version of a combination square?
Ian Peden No, it is a depth gauge / marking gauge.
@@tonym2328 OK. Marking gauge is what I meant, I use my combination square for this. Thanks.
Center out
why did you sand off the lines when you just covered them up???
maybe he was just roughing up the surface to help the glue!!!!!!!!!!!
To make clearance for the ruler.
Or just use a combination square
For wat use
Centre finder and centre drilling.
I lafffed bcs I had to
P .
?????. Why
Show quick
Ok 👍
Too slow! Get to the point.
This is certainly an amateur at work, no safety taken into consideration and drilling in such a strange way. Do it once and do it right
13 minutes i`ll never get back ..ffs what a waste of your time and mine
Thank you for visiting 🙏
@@masBARLINwoodworking . . . . . What a lot of crap. . . .
what a joke
Stop posting this kind project,if you don't say nothing about measurement,are you trying to give the idea or just show yourself and getting paid from You Tube.