I PUT THE POWER STEERING RACK BACK ON THE SUBARU EP.11
HTML-код
- Опубликовано: 5 май 2024
- In an effort to get the videos out more frequently, I decide to do a “shorter” video than normal. So in this video, we put on the power steering rack back on mona and I give an update on what’s been happening off camera with Mona.
Авто/Мото
![Remble - Colors (ft. Mozzy & Stoneda5th) [Official Music Video]](http://i.ytimg.com/vi/KF-3AU9g9xg/mqdefault.jpg)
Get some brushable seam sealer and brush onto the welds before you underseal, it's not ideal but it'll fill the holes and last a long time.
Yeah I had some delivered not too long ago, so that’s on my to do list after the arches are welded
I had the very same struggle with those power steering lines on the classic Impreza. Later realized you can disconnect them further up and slide them both through the subframe while still connected to the steering rack. Will hopefully help if you ever need to take it out again. Love the vids 💜
If only I knew! It was a right pain but thanks at least I know for next time now
Great video as always. I think it may be worth cleaning the rest of the thread hols in the subframe to make future work a tad easier. Ill attack it with a wire drill brush saturday if you want.
We need some anti seize apparently if you have any spare?
@@slothgarage I don't I'm afraid
Hi Jake, just sent you an email with some pics of where the connectors go. When it comes to reinstalling bolts in powder coated stuff I find it best to run a thread tap down first, I have a selection of decent quality ones from the likes of Presto and Apex (don’t buy Chinese rubbish), also like to put a bit of anti-seize on the bolt, will go in nicer and make it easier to remove in future should you need to!
Hi rich, I’ll check them out. I might have a thread tap kit laying around somewhere. I didn’t think about putting anti seize on the bolts, so I’ll get some ordered. Thanks for all the tips and advice 😅
@@slothgarage just make sure the taps are the right pitch, you’ll be able to compare the taps to the bolts to check.
Is there a Haynes Manual for the car might be worth checking? Other than that heres a comment for the algo.
I’ll have to have a hunt down for one. Shame there isn’t as detailed as what BMW have.. theirs are really good. Thank for the comment 😁