Honestly for the BV I’ve always swapped out the mrm30 for two MML7 launchers. It gives you some better ranged punch and roughly the same damage in short range without spiking the BV through the roof
I love your Battlytics vids. Please do more. There's only 15 in the playlist for the last 12 months. There's 21 in the previous year. Is the playlist missing some of them?
I've never really liked the Quickdraw, as it seemed like it was under gunned and under armored. That movement mod is worth it though. That seems to make all the difference. Interesting.
OK that survivability rating really surprised me. Interesting mech, but personally I feel like I would struggle actually playing one in game. Thanks for the review.
Very surprised at how well this one did. Quickdraws usually provoke a disappointed shrug from me. And mechs relying on MRMs are usually the same (one group I played in house-ruled away the +1 penalty. And still, almost nobody played them). Good to see that this variant is better than I reckoned.
This is a more interesting configuration of a Quickdraw. It definitely resonates where this mech lives as an opportunist brawler. Being just fast enough to be hard to hit and just big enough to be dangerous. Not a stone-cold killer but if you make the opponent spend time going after a 1583pt mech and not something bigger that is worth while.
I have a Quicky in my collection. Its a good mech for light lances that are under 160 tons for DCMS. As the regular flavor for DCMS lances like to void the use of medium mechs. I normally consider running the mech with a Jenner with a side option of running smoke rounds for the SRM-4's. The 8K is ok and is best served with a 2/4 pilot at 2438 BV. When considering MRM's the +1 to hit is really nasty for many players as the performa from the MRM would be that of a 4/4 pilot when the pilot is 3/4. I have a good opinion of the Quckdraw but often consider it a medium mech more than a heavy.
I think the only thing I would do to change this 'mech would be to swap the torso ER Mediums to regular Mediums just to bring the heat down a tiny bit in mid and short range fights where you're just face rolling your weapon buttons.
Pull the MRM 30 and ammo, add an ER Large laser, 2 tons of armor and more DHS. This mech was dangerous because it could fire constantly with something and move. It worked. This is a version that relies to much on luck.
This is not my favourite version of the reliable Quickdraw, but it tends to be one of those unoptimized designs that BT does so well sometimes. It's flawed, it tries to do too much, and it's perfect. Quickdraw is the kind of mech you'd find everywhere because it can do some of everything.
MRMs just feel so overvalued by BV man. Ill watch and see if i eat my words with this thing being inefficient lol. Edit: Damn its about on par with good Succession Wars Mechs, genuinely better than expected.
Ah one of the three decent variants of the Quickdraw. God does the Quickdraw suck. It has the distinction of being the third worst refit in TRO 3050 (original or upgrade), and even in 3025 suffers from trying to be a faster Grasshopper but with rear mounted guns. At least the 2018 Battletech game got it right by pointing the guns forward...
Does the algorithm take into account the fact that some mechs don't have weapons that reach to the starting range of the Javelin? The Time to Kill could be adjusted to when it comes under fire from the longest ranged weapon whatever mech you're testing possesses.
@NF-nv3xw that’s fair - I think my order of pref is basics first… the pulse kill me because of the range and tonnage. 1 ton or more range - give me one!
I HATED the Quickdraw in the original era. Fun to see it performing respectably in the 3060s. Maybe it never performed for me because I never take high gunnery on my mechwarriors.
I want to love the quickdraw so much, and this is the best variant I’ve seen, but it’s just so “meh” to me. It’s not that it’s a poorly designed mech, I love the lancelot, it’s just something about it. I don’t love the aesthetics, and I don’t love the concept or the loadout. But I will get one for house Kurita!
Starting this video, the first question must be: will this variant actually be a not-terrible Quickdraw? I have my doubts... Having watched the video, I think I can safely say it's at best mediocre. I'm not a fan of MRMs (outside of MWO, where they're incredibly nasty). Maybe if they'd put a couple MMLs on there instead, so that it could plink away at range and then smash stuff close in. I also wonder how much a LFE with some CASE2 and extra armor would have impacted the survivability.
This thing comes with a C3 slave yeh ? I'm hearing you about the gunnery sensitivity on a non Apollo MRM launcher sans C3 network .......... Put MRM in a C3 network though and prepare for tears .......... The Blakemondo with two MRM 40s is especially hilarious
@@DeathfromAboveWargaming see that's got me worried. I hear tge sti trans are actually strong. Now if you said head gasket or wrx trans I'd be like sweet that's the next video
Quickdraw is one of my favorite niche mechs to bring out to the table, especially in succ wars era, with the 4H, it's a mech similar to the Wolverine 6R, meant to survive and do enough damage to be a problem, and no one is going to call a twelve damage kick or two six damage punches a bad idea :)
Any mech with an mrm in it is complete crap but scales with gunnery like you wouldn't believe. If youre playing with SPAs in megamek this thing rips. Put a 2/3 in there with cluster hitter and you will bounce around the map popping vehicles like pimples.
@@DeathfromAboveWargaming lol, ty for making battlytics its been my favorite battletech series on RUclips since it started! If you are looking for any recommendations a head to head comparison between the atlas and the akuma would be awesome
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Honestly for the BV I’ve always swapped out the mrm30 for two MML7 launchers. It gives you some better ranged punch and roughly the same damage in short range without spiking the BV through the roof
Interesting! I like that comparo - you may see that custom on the channel some day
I always loved the QKD in the 3025 era, it is nice to see that some of the updated versions keep it relevant. Excellent video as always, gentlemen!
Thanks for watching!
Well made video. It's so critical to learn how to play this mech before you put it on the table.
Thanks for watching!
I love your Battlytics vids. Please do more. There's only 15 in the playlist for the last 12 months. There's 21 in the previous year. Is the playlist missing some of them?
Probably 😄
I will take a look! Unfortunately it’s a manual process to add them so sometimes the playlists do fall behind.
Go easy on him, these vids take time to produce. Quality Over Quantity
Haha thank you! We do try to keep the quality and innovation at the forefront! After I hit the mega millions, I’ll go full time on DFA 😄
Great video, thank you for the time and efforts.
Appreciate your viewership!
Great video! Looking forward to more videos.
I've never really liked the Quickdraw, as it seemed like it was under gunned and under armored. That movement mod is worth it though. That seems to make all the difference. Interesting.
You should do the same thing you did with the Urbanmech -- compare several variants of the same 'Mech, and see what happens.
OK that survivability rating really surprised me. Interesting mech, but personally I feel like I would struggle actually playing one in game. Thanks for the review.
Thanks for watching!
The Quickdraw. Both Thom's most favorite mech and Thom's wife's least favorite mech.
How did the Quickdraw fair? I keep blacking out from the ecstasy of hearing him mention the Bushwacker.
LOL
Very surprised at how well this one did. Quickdraws usually provoke a disappointed shrug from me. And mechs relying on MRMs are usually the same (one group I played in house-ruled away the +1 penalty. And still, almost nobody played them). Good to see that this variant is better than I reckoned.
I think “right range good pilot” helps tremendously with MRMs. I do wish they were better!
I've just painted up a Quickdraw, let's see how it holds up in the IlClan era! 🐺
Isn't there something like an Apollo FCS for MRM systems to help their chances of hitting?
Yes! But it reduces your cluster roll.
There's C3 too , pretty sure this should have a C3 slave
@@mathewkelly9968 sure, but C3 slows the whole game down as you effectively have to do range and LOS twice for every shot.
Quickdraw and wolverine, backed up by a griffin and dervish. That's a lit cavalry Lance imo, especially in mountainous terrain.
This is a more interesting configuration of a Quickdraw. It definitely resonates where this mech lives as an opportunist brawler. Being just fast enough to be hard to hit and just big enough to be dangerous. Not a stone-cold killer but if you make the opponent spend time going after a 1583pt mech and not something bigger that is worth while.
#protips totally agree!!
I have a Quicky in my collection. Its a good mech for light lances that are under 160 tons for DCMS. As the regular flavor for DCMS lances like to void the use of medium mechs. I normally consider running the mech with a Jenner with a side option of running smoke rounds for the SRM-4's. The 8K is ok and is best served with a 2/4 pilot at 2438 BV. When considering MRM's the +1 to hit is really nasty for many players as the performa from the MRM would be that of a 4/4 pilot when the pilot is 3/4. I have a good opinion of the Quckdraw but often consider it a medium mech more than a heavy.
I'd like to see an ilClan Era Quickdraw , add some endo , CASE II , double heat sinks , ER mediums , Enhanced LRM , a Streak SRM and a tad more armour
Now we’re talking!!
I think the only thing I would do to change this 'mech would be to swap the torso ER Mediums to regular Mediums just to bring the heat down a tiny bit in mid and short range fights where you're just face rolling your weapon buttons.
Agree - the IS erMLas are mediocre. The regular MLas is king.
@@DeathfromAboveWargaming always has been, always will be.
Pull the MRM 30 and ammo, add an ER Large laser, 2 tons of armor and more DHS. This mech was dangerous because it could fire constantly with something and move. It worked. This is a version that relies to much on luck.
This is not my favourite version of the reliable Quickdraw, but it tends to be one of those unoptimized designs that BT does so well sometimes. It's flawed, it tries to do too much, and it's perfect. Quickdraw is the kind of mech you'd find everywhere because it can do some of everything.
The quickdraw is quintessential BattleTech!! What is your favorite var?
12:19 survivability should be all right , how many mechs sport 8 tons of armour and pretty much a +3 modifier ......... Not alot
It’s a good point!
MRMs just feel so overvalued by BV man. Ill watch and see if i eat my words with this thing being inefficient lol.
Edit: Damn its about on par with good Succession Wars Mechs, genuinely better than expected.
Ah one of the three decent variants of the Quickdraw. God does the Quickdraw suck. It has the distinction of being the third worst refit in TRO 3050 (original or upgrade), and even in 3025 suffers from trying to be a faster Grasshopper but with rear mounted guns. At least the 2018 Battletech game got it right by pointing the guns forward...
Haha its so funny- I do love the design/aesthetics… but give me a half decent variant!!
Does the algorithm take into account the fact that some mechs don't have weapons that reach to the starting range of the Javelin? The Time to Kill could be adjusted to when it comes under fire from the longest ranged weapon whatever mech you're testing possesses.
2mpls instead of ermeds would make the mech so much better.
Ooo controversial! You prefer IS pulse weapons over er? I want to know more.
@@DeathfromAboveWargaming ermeds are too toasty even for the IS variants. So I rather go with pulses or the outright basic lasers.
@NF-nv3xw that’s fair - I think my order of pref is basics first… the pulse kill me because of the range and tonnage. 1 ton or more range - give me one!
For any 'mech that relies so heavily on jumping, pulse lasers are very attractive.
This is a good point!
I HATED the Quickdraw in the original era. Fun to see it performing respectably in the 3060s. Maybe it never performed for me because I never take high gunnery on my mechwarriors.
As long as you avoid the atrocious 5M and K the Quickdraw is good
I want to love the quickdraw so much, and this is the best variant I’ve seen, but it’s just so “meh” to me. It’s not that it’s a poorly designed mech, I love the lancelot, it’s just something about it. I don’t love the aesthetics, and I don’t love the concept or the loadout. But I will get one for house Kurita!
For the draaaagon
Starting this video, the first question must be: will this variant actually be a not-terrible Quickdraw? I have my doubts...
Having watched the video, I think I can safely say it's at best mediocre. I'm not a fan of MRMs (outside of MWO, where they're incredibly nasty). Maybe if they'd put a couple MMLs on there instead, so that it could plink away at range and then smash stuff close in. I also wonder how much a LFE with some CASE2 and extra armor would have impacted the survivability.
But but but mediocre isn’t terrible 😂 I feel so bad for the QKD. Great looking mech. Worst options in terms of variant.
I might use this at the company level. Meh-mech. Thanks 🎉
Haha QKD-MEH
This thing comes with a C3 slave yeh ? I'm hearing you about the gunnery sensitivity on a non Apollo MRM launcher sans C3 network .......... Put MRM in a C3 network though and prepare for tears .......... The Blakemondo with two MRM 40s is especially hilarious
I use quickdraws as annoying dodge tank not this version because mrms.
pair this mech with a hole puncher and watch it really sing
I'm a canner. I've no experience with this mech... ghost bear forever
Might be some clan ‘mechs on the old horizon… maybe even a CGB one.
@@DeathfromAboveWargaming still patiently waiting for the great Kodiak. Lol 👀
@JustinPivinski-cm2rh Could be as likely as an STi blowing its transmission.
@@DeathfromAboveWargaming see that's got me worried. I hear tge sti trans are actually strong. Now if you said head gasket or wrx trans I'd be like sweet that's the next video
@JustinPivinski-cm2rh haha I must be out of touch with the times. Probably because I can’t stay up past 1 anymore 😜
Quickdraw is one of my favorite niche mechs to bring out to the table, especially in succ wars era, with the 4H, it's a mech similar to the Wolverine 6R, meant to survive and do enough damage to be a problem, and no one is going to call a twelve damage kick or two six damage punches a bad idea :)
Any mech with an mrm in it is complete crap but scales with gunnery like you wouldn't believe. If youre playing with SPAs in megamek this thing rips. Put a 2/3 in there with cluster hitter and you will bounce around the map popping vehicles like pimples.
Lmao - in the running for best comment. The visual of vehicles exploding like pimples is gross but satisfying.
@@DeathfromAboveWargaming lol, ty for making battlytics its been my favorite battletech series on RUclips since it started! If you are looking for any recommendations a head to head comparison between the atlas and the akuma would be awesome
I made some promises to get thru the bulk of the wave 2 models - but I may get back to those comparos soon!