That’s what I’m saying! Yesterday I was pressing out ball joints from a dodge. The fitment was STUPID right. Thought I was gonna blow up my ball joint press tool.
@@user-lq8mm2em2vwe use metric mostly except when it comes to lbs and foot lbs. What is a NM of torque? I don't know but I definitely know my foot lbs. Oh ya Horsepower sounds better than Kilowatts for an engine
I didn't have a gun on mine. Enter a vic2, 1 meter breaker bar and a 2lb club hammer. Oh, and an ache wrist weeks later from the shock. Ironically my threads were spotless, but the flange rusts and breaking that was the hard part. Once it gave it spun out by hand.
This guy is smart, anytime you are going to work on something thats been there a long time spray the hell out of it with some kind of penetrating oil,it will make your job real smooth.
Man I love that u put all the clips back idk if it’s just me but I’m starting to see mechanics get a lazier than b4 sum ppl would just throw it on and not indent or not bend a cotter pin in the right direction
I did one when I was 18 in the sand on delta 98 , I used the weight of the car to press it . Amazing what you can do when stranded and put mind to it , funny thing is 30 years later going through tools and we had all different size ball joint forks 🍴
You know you don't need a pickle fork or joint spreader, all you need is a good whack with a 32+ oz ball peen to get the ball joint stud out of the control arm. Dont waste money on fancy tools!
They do not build them like this anymore! You have to replace the engine and transmission to get the same job done now, that's if not replacing the whole car, which is way easier!
It's great to use the gun to get those things out, but they should be done up to a specified torque with a torque wrench. If they are done up with the gun the next guy will really struggle.
I seen a bunch of mechanical videos and the most common mistakes are not being clean jobs! Mechanics don't even bother cleaning the rust or anything just like this one.
In reality there was absolutely nothing wrong with that ball joint. 15 years of being a dealer tech I have not EVER replaced or seen any other tech ever replace those. Ever.
When you reattaching the arm to the ball joint, you should never use an impact gun That’s a good way to overtighten it and squash, the rubber bushing therefore rendering the ball joint trash
@@bluecollarnobody4217 I have no objection to that. But after working for 20 years, I somehow understand what I'm doing. So many people with so many opinions!
So have 4 way stop signs but two is only needed if the two are experienced drivers right same principle, if you do enough repairs for years your guesstimate is usually spot on or close enough
Taking out a ball joint without dicking around with the whole suspension assembly, give that engineer a raise
According to the manufacturer's instructions, the knuckle must be removed to replace the ball joint!😉
Dude that engineer was probably killed for designing something so logical.😂
🤣🤣🤣🤣What car is that
No loe
👍
It’s a older Peugeot/Citroën platform :)
@@ricardorodriguez-se7tp307 / 308
Screw on ball joints 😮😮😮😮😮😮😮 my god, now that's clever
That’s what I’m saying! Yesterday I was pressing out ball joints from a dodge. The fitment was STUPID right. Thought I was gonna blow up my ball joint press tool.
@@hawkboy000I’ve broken 2 of the harbor freight ones, good ol northeast salt brine huh lol
What cars is ?
Citroen / peugeot
Peugeot 307
I wish all ball joints were this easy 😮
Not the easiest option that has been seen.
VW Group has it easier in my opinion@@uldisbetons8776
Jobs easy but took me 3 attempts to find a socket that fecking fit. Renault Master/Vauxhall Movano/Nissan Interstar in the video if I'm not mistaken.
@@paulwisdom5383 this is citroen berlingo.
Yeap
I wish the law would make it mandatory to apply anti-seize compounds to bolts and nuts and treat them to prevent them from rusting.
Honda engineers: what is this? Screw on ball joint? Nah that's too easy we make it the hard way
67 years old and never see or Hurd of a screw in ball joint 😂 great idea
Kia
Пежо, peugeot
Older Chryslers and Dodges had them.
@@user-zt3df1bv4hwhich one, my 206 plus does not have it
@@alananderson1914thumbs up for chrysler dodge engineers, dads jeep liberty dont have it but it not old...a daimler era product😢
My man starting each piece by hand and THEN using the torque gun..... You know he never worked at a Discount Tire, that's for sure
Hmm
Torqued to 150ft lbs. Perfect.
The ole German torque spec. Guten tight!
Что такое фунты,цилевизованный мир пользуется метрической мерой измерения
@user-lq8mm2em2v pounds? it's what I do to your wife.
@@user-lq8mm2em2v успокойся, имперец, земля вокруг вас не вращается.
@@user-lq8mm2em2vwe use metric mostly except when it comes to lbs and foot lbs. What is a NM of torque? I don't know but I definitely know my foot lbs. Oh ya Horsepower sounds better than Kilowatts for an engine
The rust means this is a brand new car in northern Ohio for one winter season.
Правильный мастер сначала наживляет гайку потом крутит гайковертом
@@Odin-dvajditrue
😂😂😂😂
А почему в северном Огайо машины так сильно ржавеют?
Why you guys picking on norther ohio they get a lot worst weather in Minnesota and in the Midwest so pick on them
I remember not too long ago ball joints used to come with Grease fitting and they last twice as long
plus torquing on the ground
👍🏿
Gotta buy premium parts now to get that zerk
yeah I was wondering where the grease fitting was.
With ball joint off u could drill tap clean housing install zerk once ball joint installed add greese technically if u really wanted too.
Whaaaat screw in lower ball joint 😮 never seen one before , genius
Wow thats nice screw on ball joint that can definitely make life a lot easier.
Not always
You'll get one that doesn't gun one day and pulls the thread out
The skill is fixing it after 😂
I didn't have a gun on mine. Enter a vic2, 1 meter breaker bar and a 2lb club hammer. Oh, and an ache wrist weeks later from the shock.
Ironically my threads were spotless, but the flange rusts and breaking that was the hard part. Once it gave it spun out by hand.
In America, joints stay in place because we demand it. No nut necessary
"fck your face"
I'll never get tired of that line😂😂😂😂
That car must be a mini metro 😅
Peugeot 308
Могли бы и корщеткой почистить , вот так делают в каждом сервисе
👍🏿
Они ещё считают смазку излишней...😅всё на сухую😢
@@user-lc3nh4bg9g a mne kažetsa sto Vi smazku mednuju daže na hleb mažete!
@@uldisbetons8776 точно! Попробуйте, это вкусно!
Videos like this one always make car repairs look easy, too bad none have seen a screw on ball joint lol
If only all ball joints were that easy
That’s a magnificent ball joint design. I love it.❤
Always torque set the bolts
Of course
He went a full three ugga duggas 😂
@@Cobrajamie What is the current ugga dugga conversion? Last I heard is 20 ft. pounds, so 3 ugga duggas would be 60 foot pounds ;)
This guy is smart, anytime you are going to work on something thats been there a long time spray the hell out of it with some kind of penetrating oil,it will make your job real smooth.
Chevy just rivets them to the lower control arm and says have fun😂
Lube on that new ball joint threads with give you a false torque, it will be too tight.
👍🏿
I think him using the gun threw the torque spec out the window my guy
@@stickmanfour9958 Exactly!
wet impact torque is permanent torque😂
@@willt718😂😂😂😂
So glad I don’t live where rust is that bad
That's good.
Rust in Russia - this is normal)
Ржавчина только в россии?
Нам привозят старые авто в россию уже гнилые.
Man I love that u put all the clips back idk if it’s just me but I’m starting to see mechanics get a lazier than b4 sum ppl would just throw it on and not indent or not bend a cotter pin in the right direction
Changing ball joint is definitely cheaper than the whole control arm ! Hell yeah
👍🏿
Это моя мечта. На на моей Тойоте менять надо весь рычаг. И только один вопрос, какой идиот это придумал?
Notice how that ball joint just goes through the arm vs having to be pressed out of the arm
I did one when I was 18 in the sand on delta 98 , I used the weight of the car to press it . Amazing what you can do when stranded and put mind to it , funny thing is 30 years later going through tools and we had all different size ball joint forks 🍴
Чётка 👍
Those power tools are a blessing
Я уже представил тот кайф , как после замены этой шаровой, ощущается мягкость хода и полная тишина подвески 😊
what a car is this?
Citroen Berlingo
Only a French car has a screw in ball joint
@@jerrydawg4434 It probably is. I have come across such citroens and renault master.
@@uldisbetons8776 thanks
Идеальная конструкция!!!
Dodge has been doing this since the late 60s, unfortunately they stopped after the mergers
Job very well done, you took the time to do it correctly.😊
More engineers need to learn from this
👍🏿
All should be like this
Always keep the nut on the end of the ball joint when it pops it can go flying off.
In this case it is not dangerous! You have to strain a lot to get the control arm off!
Исполнение самой шаровой лучшее🔥🔥🔥🔥
You know you don't need a pickle fork or joint spreader, all you need is a good whack with a 32+ oz ball peen to get the ball joint stud out of the control arm. Dont waste money on fancy tools!
Holy shit i need this car. Most simple ball joint change
Then you have to buy an 8-year-old Citroen! Maybe you'll hit a ball joint like that!
Like pure clean surgery cool bless u sir
They do not build them like this anymore! You have to replace the engine and transmission to get the same job done now, that's if not replacing the whole car, which is way easier!
Even Shazam can't help me this time.
Engineer be like "so u want to change only the ball joint and do it fast? Nah uh u gotta do the whole control arm fam"😂
Who ever thought of this is smart as fuck
Threaded ball joint? Dude, why can't they all be like this?
All vehicles need lowers like this, life would be so much easier
Antes de usar a máquina para apertar, ele APONTA a porca primeiro, já mostra que é profissional 👏🏼👏🏼🙌🏼🙌🏼
Gonna do these on Wife’s Hummer 🔥🔥🔥
I'm not crying, just got something in my eye. No you crying, damn French!
It's great to use the gun to get those things out, but they should be done up to a specified torque with a torque wrench. If they are done up with the gun the next guy will really struggle.
No stress. Everything is done within reason and with understanding!
This looks just like how my x5 suspension is set up
Finally, a ball joint I really like the design of
Very neat work. 👌
Thanks
Good design on the ball joint .
Of course
Looks like it's most likely a German car from what I can tell.
They're usually trash to work on but that balljoint design is pretty nifty!
You are wrong! French car.
Life would be great if I had these on my Acura
Awesome work
😎👍🏿
Mechanics guide: the rubber is very fragile, please torque to 21nm…
IMPACT WRENCH GOES BRRRRRRRRRR
Great job
I seen a bunch of mechanical videos and the most common mistakes are not being clean jobs! Mechanics don't even bother cleaning the rust or anything just like this one.
👍🏿
Never reassemble parts with an impact.
Even in a pit crew ? Idea here was ball joint done in 40 seconds 😂, prices they charge per hour I can over look the no grease
Screw as you wish, the result does not change!
Скажу как про, отличная замена шаровой
Классный съемный ключ! Обычно кувалдой выбивают 😂🤣😂🪖
Kuvaldoj tože možem! 😉
That's exactly like the ball joint on my old Hyundai i30. Nightmare to get off if you don't have a heavy duty impact wrench and 50mm socket.
you gotta have the right tools for the job.
Making it look easy 👍🏼
It turned out that it looks easy.😉
Good work
😎
Screw in ball joint?
Sign me up❤
This made me warm inside
👍🏿😎
Excelente trabajo, me gusta mucho la limpieza, muchos mecánico son desprolijos.
I’ve never seen a screw in ball joint ! Nice!
Buy a Citroen and maybe you'll see it!😉
Quien invento la llave de impacto debería ganar un premio nobel, un oscar o ya de pérdida un Ariel 😂
I saw the accidental tighten instead of loosening 😂. But I didnt see a torque wrench 😂. Just giving you a hard time
Thank you for cleaning the threads first... I don't mind doing those but not when someone strips the threads, then brings it to me
Never seize for the next guy
I wish all lower ball joints were like this 😢 I drive a 3rd gen 4Runner 🙄
If you want one, you should drive a Citroen.
You had less thread on the original one and the new one is hella torqued down squished the shwwwt out of that bushing.
Dažādu ražotāju lodbalsti. Tāpēc tā izskatās!
Best Job 👍
Amico, fattelo dire, lavori molto bene 😊
In reality there was absolutely nothing wrong with that ball joint. 15 years of being a dealer tech I have not EVER replaced or seen any other tech ever replace those. Ever.
Slinkojāt! Mūsu ceļus netur šie lodbalsti.
I love it ..its about time
👍🏿😎
All ball joints should be screw in ball joints
Nothing like bolting new parts onto a bucket of rust
👍🏿😎
Nachhaltige Reparatur 👍
nicht immer gleich das ganze Teil.
Why aren't they all like this
I wouldn't even call that rust. Must be nice.
👍🏿
Torque....he gave it torque. Don't clean off the parts, they will just get dirty again.
Lol😂
What else do you want to clean there? It's all pointless.
Am I tripping or does the music sound like drake & Josh’s a pip pip do doodley do😂😂
Meilleure système de rotule ❤️❤️❤️
오.. 공구사용 잘 하시는데요. 👍
그래도 너트는 산부분을 다 채우고 돌리면 더 완벽했을듯.
Someone is surly being interrogated for thinking of such a concept, screwable ball joint 🤯
Now he'll have to split the ball joint to wishbone taper joint all over again to replace the perished CV joint boot.
You probably think so. CV boot is not damaged and there is nothing wrong with it.
@@uldisbetons8776 Yes I think you're right.
What looks like cracking and perishing is probably dust and water staining.
@@uldisbetons8776protectant can make boot last a lot longer
@@angusmurray3767 It is so.
70-early 90s dodge 2wd utilize the same thread in technology wont say its goes this smooth after 40 years of age but aye it is ehat it is😂😂😂
Very nice
I never saw a threaded ball joint 😲
Now you see
The torque whisperer
👍🏿😎
Love that torque specs. Ain't got time to do it correct. Don't do it at all.
Paldies par komentāru.
The real questions is "Name that Car?"
Citroen Berlingo
When you reattaching the arm to the ball joint, you should never use an impact gun
That’s a good way to overtighten it and squash, the rubber bushing therefore rendering the ball joint trash
It's not the first day with a pipe on the roof!😎
@@uldisbetons8776 suit yourself
But procedures have been established for a reason
@@bluecollarnobody4217 I have no objection to that. But after working for 20 years, I somehow understand what I'm doing. So many people with so many opinions!
@@uldisbetons8776 I’ve been on the job for 23 years, but I understand
So have 4 way stop signs but two is only needed if the two are experienced drivers right same principle, if you do enough repairs for years your guesstimate is usually spot on or close enough
Must be nice to work on a car with no rust
Of course. But that is not the case.