Hey there! If you are referring to the cable we discuss at 2:45 that is used to decide your DRL color and is already attached you the adapter harnesses included with your lamps. Simply plug or unplug it, then turn the vehicle and back on. This is used to decide what DRL color you want to run.
The fuse pulled in the video at 4:03 is from slot 125 (USB smart charger), though the audio says to pull slot 24 (PCM + Power Steering Module). I’m assuming it should be 24?
Hey thank you for bringing this to our attention! Sorry for the confusion, but you are correct, please use the fuse location 24. I have made note of this to our team as well. Let me know if you have any other questions!
As mentioned at the 3:26 mark in the install video here you will only need to use the DRL fuse tap if your vehicle does not come with DRLs from the factory. This is needed to add the function since the vehicles did not originally have it, and the process is extremely simple.
Love these lights...but having an issue. Unlock the doors, both headlights power up as intended. However, when the engine is on and the vehicle is in park the driver's side halo illumination goes out. As soon as I shift into drive or reverse the driver's halo goes through it's start up cycle and then stays on (as designed). As soon as I go back to park the halo illumination goes off again (only driver side). Is this normal, anyone else experiencing this ? I have checked all wiring etc, everything checks out. Any advice ? Thx.
Hey David! Sorry to hear about that, that is certainly odd. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
Hey there! Sorry to hear you are having trouble. You may have tapped the DRL fuse to a location that is powered even when the vehicle is turned off. I would reach out to our customer service team and they will gladly help resolve this! Hours: Monday-Friday 10 a.m. - 5 p.m. Email: contact@formlights.com Phone: 636-748-4444
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
Thanks for the video. I just installed the lights and am confused about the "DRL" cable? In what use case would I need to add it?
Hey there! If you are referring to the cable we discuss at 2:45 that is used to decide your DRL color and is already attached you the adapter harnesses included with your lamps. Simply plug or unplug it, then turn the vehicle and back on. This is used to decide what DRL color you want to run.
The fuse pulled in the video at 4:03 is from slot 125 (USB smart charger), though the audio says to pull slot 24 (PCM + Power Steering Module). I’m assuming it should be 24?
Hey thank you for bringing this to our attention! Sorry for the confusion, but you are correct, please use the fuse location 24. I have made note of this to our team as well. Let me know if you have any other questions!
Does anyone with Form lights have beam shake going over bumps? It is very noticeable.
My 2024 has the signature Leds. They won't light up without the fuse tap?
As mentioned at the 3:26 mark in the install video here you will only need to use the DRL fuse tap if your vehicle does not come with DRLs from the factory. This is needed to add the function since the vehicles did not originally have it, and the process is extremely simple.
Love these lights...but having an issue. Unlock the doors, both headlights power up as intended. However, when the engine is on and the vehicle is in park the driver's side halo illumination goes out. As soon as I shift into drive or reverse the driver's halo goes through it's start up cycle and then stays on (as designed). As soon as I go back to park the halo illumination goes off again (only driver side). Is this normal, anyone else experiencing this ? I have checked all wiring etc, everything checks out. Any advice ? Thx.
Hey David! Sorry to hear about that, that is certainly odd. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
Do you guys sell the harness seperetly?
Hey there! What are you wanting a harness for?
My lights stay on after shutting the car down and locking it, any advice?
Hey there! Sorry to hear you are having trouble. You may have tapped the DRL fuse to a location that is powered even when the vehicle is turned off. I would reach out to our customer service team and they will gladly help resolve this!
Hours: Monday-Friday 10 a.m. - 5 p.m.
Email: contact@formlights.com
Phone: 636-748-4444
😍😍😍😍😍
We were thinking the same thing!
Will these fit the bronco Raptor?