@@Noname-CB Let me help you. First, turn on the bus. Second, there are buttons under the wiper buttons. If you hover over them, you’ll see “Buttons 1 & 2”. Click on it. There will be a sound of a man speaking. Third, to select the route spoken. Press Button 1. To select the next route press Button 2. (Order: 6, 9, 10, 14, 16) Fourth, once you’ve selected your route, it’ll say the name of a bus stop. Go to the bus stop and set up your destination boards. Fifth, do your route as usual. However, when you reach your bus stop, press button 1. Hope this helps
good vid! But can you make a tutorial because I put the poles in place and try to turn on the bus but it doesn't seem to want to work but if not, its fine!
Problems may also be in the trajectory of movement. Keep in mind that the trolleybus is quite long and the rods themselves stretch far behind the trolleybus. If you enter a turn on a too steep trajectory, the rods may fly out from under the wire just without reaching it. Go into turns along as long a trajectory as possible, pressing against the side of the road, this will allow you to take turns at a higher speed.
@@slevente893 I just found out the answer. First you need to have navigation turned on in settings (obviously). Then in trolley, you need to put 2 normal signs (top front and between front and middle doors) and 1 small sign (back top). Then get in drivers seat and it should show you the way. Finaly i can play this game. :D
Hey! Great video. Just remember that you have voice announcements in the Trolleybus
I know however I don't know exactly how to use it.
@@Noname-CB Let me help you.
First, turn on the bus.
Second, there are buttons under the wiper buttons. If you hover over them, you’ll see “Buttons 1 & 2”. Click on it. There will be a sound of a man speaking.
Third, to select the route spoken. Press Button 1. To select the next route press Button 2. (Order: 6, 9, 10, 14, 16)
Fourth, once you’ve selected your route, it’ll say the name of a bus stop. Go to the bus stop and set up your destination boards.
Fifth, do your route as usual. However, when you reach your bus stop, press button 1.
Hope this helps
@@jonathanaina7754 u can also press "]" to play the announcement
@@smrt_seekwell he's probably on mobile like me
@Bananza. Y u insulting him like that and it's PC only.....
good vid! But can you make a tutorial because I put the poles in place and try to turn on the bus but it doesn't seem to want to work but if not, its fine!
My tutorial video - ruclips.net/video/YI4mv1UUpUw/видео.htmlsi=b-mdrScgeHHlkNvl
@@Noname-CB thanks!
Keep It up
why does my bus keeps on dewiring from the pole to the wire when im turning????????????
Maybe too high a speed? Or worn pole heads and also lag could be the problem. Try on a private server.
youre not switching tracks correctly, but if its just on a regular curve with no switches then its bc you going too fast or pole head inserts are bad
Problems may also be in the trajectory of movement. Keep in mind that the trolleybus is quite long and the rods themselves stretch far behind the trolleybus. If you enter a turn on a too steep trajectory, the rods may fly out from under the wire just without reaching it. Go into turns along as long a trajectory as possible, pressing against the side of the road, this will allow you to take turns at a higher speed.
greetings, mind doing a video about my self hosted server?
I'm not familiar with self hosted servers so I wouldn't make a video related to them at this point.
@@Noname-CB nothing to be scared by when it comes to those
Would you happen to know why whenever I go under switches on turns my bus loses all power and I can’t restore it
I think I know what you're talking about... when that happens check the master switches behind the drivers seat.
@@Noname-CB yeah sorry it was a bit unclear. But that did work my breakers in the back just decide to go out half the time
@@Nik_MTB2024dont accelerate/decelerate when youre going over a switch that will cause them to pop
How do you have higer fps? I have a good system but my fps is so bad
It's not always your system. The problem is in general with the game/roblox; the internet... Try playing in a private server. It usually helps.
will this game get anymore updates
It gets updates but they are not related to new vehicles, maps etc. I personally hope to see new and great things.
The bus doesn't even leave for me, why can't I leave?
You probably didn't engage forward gear or something. Watch the video on how to prepare the trolley again.
How do you have the purple lines on the power lines?
This is set in the settings before you spawn.
@@Noname-CB Then it doesnt work, because it doesnt show up in game. I have it turned on, but still nothing.
It works when you set a route
@@Noname-CB How do i do that? If its by putting signs in front and back, then i did that.
@@slevente893 I just found out the answer. First you need to have navigation turned on in settings (obviously).
Then in trolley, you need to put 2 normal signs (top front and between front and middle doors) and 1 small sign (back top). Then get in drivers seat and it should show you the way.
Finaly i can play this game. :D
How did you spawn at hardbass depot?
Wait nevermind i know it srry
No problem
what is happening at 21:31
It seems that the traffic AI has jammed itself.
hi
Hello
Oh my god
@@dangamer5948 ?