Brilliant. The best video on how to do this out of all the ones I have watched. From an Aussie, too. All homeowners should watch this if they are having gutters replaced. I had my guttering replaced after the October 2021 severe storms on the Mid- North Coast of Australia. Shocking job was done, including the mitres. Poor workmanship covered by dollops of silicone and corner caps resulting in leaks.
Ahhh - you make it look sooo easy! After an hour and a half of trying to do what you just did in 6 minutes, I rang Metrol for a quote for them to make it. They can have the $80 including materials. I tried.... too much for this handyman.
Gday Tyron, Thanks for taking the time to post this mate. I’m using a slightly different profile but will get the job done. I owe you a beer mate! 👍👍 Cheers, Nigel
Thanks for sharing. I am so happy to watch your channel. How wide do I need from the straight line to meet the 45 angle? Is the last line a 45 angle too?
Any advantage in using these gutter corners to connect 2 gutters at 90 degrees? As opposed to using the 90 degree external gutter bracket made by Lysaght and others ?
Hi Tyrone, I want to replace a Quad gutter internal 90 deg. corner bracket from an existing gutter as the bracket has cracked at bottom, the outside pop rivets are simple to remove, but there's 2x pop rivets securing it to the metal fascia board, those 2 rivets seem inaccessible to a drill to drill them out... how would you go about removing them? Cheers..
@@tozza87 if you've been spouting that long then that's a shame... theres a lot of tips n tricks to make the job easier. Also good tips to show the audience too. I'm just saying. I mark from the inside of gutter with a template. I ain't even bragging it's just facts. "Alot faster and nicer" Your also not leaving enough at the top too on the straight piece to rivet aswell when it comes to miter. Pretty sad no ones showed you tbh. Anyway your working anyway and looks pretty good, That's the main thing. Have a good one! 👊
Kevin I installed some Zincalume gutters on a house 20 years ago less than 100m from the ocean and to this day there is no issues with the gutters at all. Comes down to the installation and cleaning swarf out of the gutters to prolong the life of the newly installed gutters 👍
You shouldn’t make how to videos you don’t speak clearly and you go too quickly for those of us who have never done it before you talk like your instructing some mates at work don’t ever try to be a tech teacher
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Brilliant. The best video on how to do this out of all the ones I have watched. From an Aussie, too. All homeowners should watch this if they are having gutters replaced. I had my guttering replaced after the October 2021 severe storms on the Mid- North Coast of Australia. Shocking job was done, including the mitres. Poor workmanship covered by dollops of silicone and corner caps resulting in leaks.
Great video mate, simple and clear. Working on the ground, wearing Vollies, a true Aussie roofer! 😃
Ahhh - you make it look sooo easy! After an hour and a half of trying to do what you just did in 6 minutes, I rang Metrol for a quote for them to make it. They can have the $80 including materials. I tried.... too much for this handyman.
Haha I’ve got 20 years under the belt. Can do corners in under a minute
That was actually pretty amazing. You made that look easy but I know better.
Mick Lewis guttering is easy
If you're good at your proffesion, it looks easy to bystanders... Nice work.
That is terrific stuff .Thanks for posting. Exactly the job I'am working on.
Gday Tyron,
Thanks for taking the time to post this mate. I’m using a slightly different profile but will get the job done.
I owe you a beer mate! 👍👍
Cheers, Nigel
Thanks Tyron, very helpful video mate!
Thanks for sharing. I am so happy to watch your channel.
How wide do I need from the straight line to meet the 45 angle? Is the last line a 45 angle too?
Thanks for sharing excellent
Any advantage in using these gutter corners to connect 2 gutters at 90 degrees? As opposed to using the 90 degree external gutter bracket made by Lysaght and others ?
Hi Tyrone, Great video, what did you mean its 145mm cause of the curve?
Excellent post ..... thanks
Please post cuts for other profiles as well. Thanks
Hi Tyrone, I want to replace a Quad gutter internal 90 deg. corner bracket from an existing gutter as the bracket has cracked at bottom, the outside pop rivets are simple to remove, but there's 2x pop rivets securing it to the metal fascia board, those 2 rivets seem inaccessible to a drill to drill them out... how would you go about removing them? Cheers..
raise a roof sheet or tile and split the two materials by hammering a chisel downward and between the two.. Regards Pink Roofing
Thanks for a great video!
they don't sell corners? :(
Nice cutten 🤠
what about when guttering is sloped downwards? M type? whats the correct term? raked?
Chris aussie rake is the word
you are a freaking boss
cheers M8
Make yourself some templates, alot nicer, more quick and efficient 👍👍
I have been guttering for 17 years- this is a how to vid mate 👌
@@tozza87 if you've been spouting that long then that's a shame... theres a lot of tips n tricks to make the job easier. Also good tips to show the audience too. I'm just saying. I mark from the inside of gutter with a template. I ain't even bragging it's just facts. "Alot faster and nicer" Your also not leaving enough at the top too on the straight piece to rivet aswell when it comes to miter. Pretty sad no ones showed you tbh. Anyway your working anyway and looks pretty good, That's the main thing. Have a good one! 👊
Haha
@@tozza87 exactly lol 🙌
I'm amazed people still do it this way when most people use cast angles now days
If I attempted this I would use half a sausage of silicon to fill the gaps, wouldn't the pre-cast ones be easier? - dying art I guess.
Ignore the ignorant haters...
Never use zinc gutters within 1000 ks of the east coast
Kevin I installed some Zincalume gutters on a house 20 years ago less than 100m from the ocean and to this day there is no issues with the gutters at all. Comes down to the installation and cleaning swarf out of the gutters to prolong the life of the newly installed gutters 👍
@@tozza87 maybe it's the quality/brand to blame lack of fall or downpipe placement too.
That is a strange gutter profile
Detroit's Mower Madness Garage it's a traditional Australian gutter style
Tyron Hammond. interesting and thanks. here in the U.S. k style is the most common profile
You need your square license revoked.
C C do go on?
Looked good to me.. Couple metal screws will pull it together tight
another poor video!
Yewwww
You shouldn’t make how to videos you don’t speak clearly and you go too quickly for those of us who have never done it before you talk like your instructing some mates at work don’t ever try to be a tech teacher