Thanks for the video and the help on the install. Will do a launch next time for the vlog😅. Appreciate it to infinity. PS: If I knew earlier that a film will be made then I would've washed the dirty girl🤣🤣
@@GERMANESE I changed the top mounts and fitted new aftermarket and it took the noise away but after 2 weeks the noise came back so I definitely need oem mounts because aftermarket doesn’t seem to be lasting
Question: I have the same car as you 1.9 TDI 2010. But my from grill thing is just black without the red round it or the letters TDI on it( almost like a regular polo). Where can I get that grill done bro it looks nice?
@@GERMANESE Makes sense I’ve been searching online and all I could find being sold was the GTI grill. Would you please tell me how you changed it from GTI to TDI on the factory grill?
To our Knowledge the Ride is very similar the FKs come with smaller springs all round compaired to the JOMs so i think they FK's are going to be a bit stiffer but thats the case with any coilovers you buy down in SA unless you spend 15K plus
Try H&R ultra low springs (50mm drop). Ride quality is far much better than coilovers and the look is sick hot 🔥 - price round about R6k. Otherwise for adjustability there's H&R coilovers which cost about R12k, then you can get almost stock comfort at reasonably low ride👌🏽 For in between m told there's BC coilovers🥴
Hi think I'm a bit late on this,don't know if I will get a reply.i installed a set of fks on my 9n3 and it drove perfect. I then removed the helpers. Ever since removing the helpers the springs are knocking against the strut. Any advice please
Hi there the people selling the unit should be able to tell you if its for that model but from what we know, the polo vivo and polo 6 have the same setup so it should fit
Question? Did you remove the adjusters at the back to get the car that low ? Because i have a 2door tdi with the same coilies but the back is much higher then this
Awesome video bra….. but go invest in some specialist tools….. substitute your block of wood for the hub splitter tool…. Span polo graaf there I c….Hit up spec auto tools jhb.
We probably would invest in one but we are not really working on cars as much 🙏 Good to know there is a specific tool for it 😂 We made the cave men proud with the wood block technique
Thanks for the video and the help on the install. Will do a launch next time for the vlog😅. Appreciate it to infinity.
PS: If I knew earlier that a film will be made then I would've washed the dirty girl🤣🤣
There's no shame in being a little dirty though lol
Hi I fitted arc coilovers but my top mounts seem to make a rubbery noise any help
Not sure exactly, we've not had that issue before. Check out Polonation on facebook they might be able to help.
@@GERMANESE I changed the top mounts and fitted new aftermarket and it took the noise away but after 2 weeks the noise came back so I definitely need oem mounts because aftermarket doesn’t seem to be lasting
Cool video 😎👍 Car sits nice.
Question: I have the same car as you 1.9 TDI 2010. But my from grill thing is just black without the red round it or the letters TDI on it( almost like a regular polo). Where can I get that grill done bro it looks nice?
That's just a polo 9n3 GTI grill they come with the red from factory and we changed the badge from GTI to TDI
@@GERMANESE Makes sense I’ve been searching online and all I could find being sold was the GTI grill. Would you please tell me how you changed it from GTI to TDI on the factory grill?
The letters clip out and we went on down to China town and just bought the T and D letter
Hows the ride quality and height compared to the JOM bluelines? I want to buy FK Coillies, Had JOM Bluelines before and the ride was not 100%
To our Knowledge the Ride is very similar the FKs come with smaller springs all round compaired to the JOMs so i think they FK's are going to be a bit stiffer but thats the case with any coilovers you buy down in SA unless you spend 15K plus
Try H&R ultra low springs (50mm drop). Ride quality is far much better than coilovers and the look is sick hot 🔥 - price round about R6k.
Otherwise for adjustability there's H&R coilovers which cost about R12k, then you can get almost stock comfort at reasonably low ride👌🏽
For in between m told there's BC coilovers🥴
Do u guys fit for a living.. im interested in putting coilies in my 9n polo.. dm me
You can send us a message on Instagram and we can chat further regarding your question, we are able to assist
Hi think I'm a bit late on this,don't know if I will get a reply.i installed a set of fks on my 9n3 and it drove perfect. I then removed the helpers. Ever since removing the helpers the springs are knocking against the strut. Any advice please
Yess buddy quick question I want to by a set of coilovers fk or arc which one is better and give more lows
Hard to say but the FK springs are smaller to our knowledge
jom
My driveshafts rub! Any tips?
C notch or raise your ride
@@GERMANESE it’s barely lowered atm :/ I’ll try some other drop links and see
Wheel spacers???
Nope just the OEM as is
Tell me im about to buy the style quip purple line coilovers... Will it fit on my polo vivo
Hi there the people selling the unit should be able to tell you if its for that model but from what we know, the polo vivo and polo 6 have the same setup so it should fit
@@GERMANESE thanks a lot
Do you prefer JOM and FK ?
Two of our members were on FKs and then the one went to air suspension, so would say FK definitely.
Question? Did you remove the adjusters at the back to get the car that low ? Because i have a 2door tdi with the same coilies but the back is much higher then this
i hope you bought jom that time
Hi guys a little help please ! The guy that fitted my FK coilovers didn't put the drop links back apparently he says it's not needed is this true ?
No it is not needed
Handling?
A lot better, car feels more planted
He could've settled for a lowering kit if he wanted to drive that height.
Link to the coil overs pleaseeee??
He got them from a company called cartel mods, and his located in Cape Town.
Mooi vlog Rickie 👍🏾👍🏾👍🏾
Awesome video
Awesome video bra….. but go invest in some specialist tools….. substitute your block of wood for the hub splitter tool…. Span polo graaf there I c….Hit up spec auto tools jhb.
We probably would invest in one but we are not really working on cars as much 🙏 Good to know there is a specific tool for it 😂 We made the cave men proud with the wood block technique
Yes buddy
How is the fk coilovers driving. Is it bouncy or stiff?
Bit more on the stiff side but not in a bad way
GermaneseCPT,that time you're asking me "What do you mean?"I think you don't know what I'm talking about.
Elle ma
#noclubbois💯🔥👑
Nxa video bru