Can i have some suggestion about the rubber flat one, i think u guys should redesign it like the new rubber bit that TT just release so it does not lose stamina. I dont remember the release date of that set so if these bit was design be4 those then my bad
I have the reason why the rubber flat drains stamina when dashing: It grips the stadium like a skidding tyre, slowing the beyblade down because it’s speeding up faster than naturally, but can’t slide like plastic. That’s why R. Accel has the Elevate gimmick so it can dash without losing speed
I just got back into bayblade, and I thought of this channel, and if it was still going and it is, you are my childhood. I hope you get more views. Love you guys. Good luck with the chanal.
I have the CS metal tip, my main thing is the rubber is a bit hard on quality and has some decent wear. Its good for fun, i got it to put on my phoenix feather which is now techincally a spriggan custom with a sticker from CrismonCursedCustoms and a rubber CS tip from Bench. It's for sure cool though.
“When’s Takara Tomy gonna hook us up with a rubber bit in Beyblade X?” Not too much longer, guys. They announced a 25th anniversary set with Dragoon S, Storm Pegasus, Victory Valkyrie, and Dran Sword, the first 3 of which all have rubber bits. 🙂
The metal bits are cool but I feel like the rubber is actually a downgrade for doing any extreme Dash attacks because with a plastic bit when it connects with the rail it uses the rotation of the Beyblade to push itself forward and the tip drags across the stadium so with a rubber tip it slows it down because of the amount of friction from it. Also after a single extreme Dash attack from the Beyblade with the rubber tip it lost almost all of its stamina
0:20 Long, metal penises is what everybody was thinking. ⚔ 3:50 Whoa, that metal bit spinning all by itself is so cool! 😲🤩 8:41 That free-spinning bit certainly interests me the most. 😀
Dear BeybladeGeeks, Could you please release a video about how to launch BeyBlades with metal bits or Metal Needle, so that bladers don't damage stadiums? I remember you suggested that bladers can launch properly without damaging the stadium.
3:34 - as cool as it is, I genuinely hope Takara Tomy doesn't make that a thing again. I know this is different from Burst but I don't want the Beyblade X meta to turn out to be as stamina dominant as Burst was near the end. That sh*t was boring af.
Not true, We allow 3d printed beyblade parts in tournaments. I guess @BeybladeGeeks don't go to beyblade X tournaments run by other real bladers. And not tournaments from that garbage WBO website. But here in the USA 🇺🇸 we have tournaments that allow 3D printed parts and they are way more fun.
Brooo i only hit cuz the title Edit:but it really shows how carefully takara tomy engineered tips are. They might seem simple but as you see in the video and many other 3d printer beytubers. They mostly suck.
If I'm in the EU (Netherlands) what would be the best website to get Takara tomy Beyblade X beyblades? Without too much shipping costs nd stuff? is there an EU site? Or should I just get the hasbro ones? because I heard the beyblades themselves are relatively the same as the Takara Tomy ones, only the arena's are different (?) supposedly. Right? Anyway if someone could point me in the right direction of where to get Takara Tomy if its more of the real deal than Hasbro 's. But yeh preferably also with decent shipping costs n what not.
not sure the fully rubberized tip is optimal for extreme dash cause of the different friction between the tip + stadium and gear + extreme line. i think its a bit redundant to put high friction tip in x beys
You don't want a full metal bit due to weight distribution. You want as much weight as possible on the outside edges of the beyblade. Having a low center of gravity does help, although with the bit being 1/3 of the weight of a shield, that's just too much.
Not really, we have started allowing 3D printed beyblade parts in tournaments. TT is to blame for not releasing more parts. Plus, 3D printed parts make Beyblade X more fun and level the playing field. No more spamming Wizard Rod in tournaments.
AYOOOOOO WHO MADE DAT TITLE?! 💀
Me
YOOO WHATS UP BBGS!!
EH WHAT?
a true wtf moment 😂
Nah fr😂
What an honor! HUGE Thank you to BBG and the mystery friend who got the bits! Now my Stiff, Hard tips are all over the internet! 😂
Im have to save up for dat Longinus too replace my broken tt Longinus 😊
YOU ARE THE GOAT!!!
great custom work buddy 👍
Metal 9-60???
Can i have some suggestion about the rubber flat one, i think u guys should redesign it like the new rubber bit that TT just release so it does not lose stamina. I dont remember the release date of that set so if these bit was design be4 those then my bad
6:04 Now I understand why Rubber Accel bit will be made with the concept of Elevate bit.
Beybladegeeks on their freaky arc💀
COLD
BeybladeFreaks
Steven and Brendan need those stiff and hard tips! 😂
Same
PAUSE. Title says YOU guys need it...not us! 😂
Pause
I have the reason why the rubber flat drains stamina when dashing: It grips the stadium like a skidding tyre, slowing the beyblade down because it’s speeding up faster than naturally, but can’t slide like plastic. That’s why R. Accel has the Elevate gimmick so it can dash without losing speed
This.
what is R. in the R. Accel? Rubber?
@@gyulalaszlo9268rubber accel
7:36 "say that again"
Heck yeah I always love them stiff and hard tips (for my beyblades)
you had us in the first half...
Stiff and hard was not something I was expecting from a beybladegeeks vid
yo just describing these Bits...no funny business here 😂
Stiff tips with the RUBBER!
Nahhh, I remember watching these guys when I was like 5 and now I see this 😭
Benchblade is amazing he has even recreated working engine gears from plastic gen .
the BBGs always putting me on to great custom products. Thanks guys. ❤
I just got back into bayblade, and I thought of this channel, and if it was still going and it is, you are my childhood. I hope you get more views. Love you guys. Good luck with the chanal.
You know you’re going to have a great day when beybladegeeks uploads
The Unicorno throwback just made me flashback to that Blitz Unicorno vs Phantom Orion battle video 🤣
I have the CS metal tip, my main thing is the rubber is a bit hard on quality and has some decent wear. Its good for fun, i got it to put on my phoenix feather which is now techincally a spriggan custom with a sticker from CrismonCursedCustoms and a rubber CS tip from Bench. It's for sure cool though.
“Ahh yes the stiff, hard tips, havent used these since the plastic gen”- Sukuna in Beyblade
Honestly, an all metal ball or spike might actually be able to make some more viable defense combos
Silver Wolf with that bearing bit is probably insane to take down
It will destroy the plastic teeth on the arena so fast 😂
AYO?!?! 😭☠️☠️☠️
Hi k1mbo
And you thought my meiden and whale top heavy was funny
I have bbx, it’s really fun, I’m already doing BeybladeX at school and there’s already recess shenanigans
Now Hells Hammer can feel the extreme fun of the extreme line.
I would love to see a video on those custom x remakes of plastic gen beys made by bench blade, like the black dranzer and dragoon v2
I would be interested to see how X beys perform using metal ratchets 🤔
Hi guys great vid and to be honest bearing driv, I mean that bearing bit got my attention the most seeing it to spin by it's own😮😮.
You should try them on the blades that are light. Such as Rhino horn.
3:21 should I tell dem
babygirls, I think the bearing and coat sharp ones could work if they were plastic instead
2:48 know what? About Blitz Unicorno's bursting against Phantom Orion?
That’s insane, bro, but funny
I love beyblade x and you have inspired me to go to a tournament even though i am a kid
It's been more than a year since I've watched this channel's vedio.
Battle the Metal RF with RA when that comes out.
Now yall gotta rename to BeybladeFreaks
Bro y'all still post BBG y'all are my childhood
That’s silver wolf with the bearing bit I need that
“When’s Takara Tomy gonna hook us up with a rubber bit in Beyblade X?” Not too much longer, guys. They announced a 25th anniversary set with Dragoon S, Storm Pegasus, Victory Valkyrie, and Dran Sword, the first 3 of which all have rubber bits. 🙂
Ux 10 have it
The metal bits there is very cool
The biggest of pauses 😂
The metal bits are cool but I feel like the rubber is actually a downgrade for doing any extreme Dash attacks because with a plastic bit when it connects with the rail it uses the rotation of the Beyblade to push itself forward and the tip drags across the stadium so with a rubber tip it slows it down because of the amount of friction from it. Also after a single extreme Dash attack from the Beyblade with the rubber tip it lost almost all of its stamina
0:20 Long, metal penises is what everybody was thinking. ⚔
3:50 Whoa, that metal bit spinning all by itself is so cool! 😲🤩
8:41 That free-spinning bit certainly interests me the most. 😀
nah nah nah bro fix your comment
Y’all are the beast
That title is mad😂😂💀💀
I think bro cooked with that title
We need a video on trying to make the bearing bit spin as long as possible👀 you guys know the reference I’m making here
Dear BeybladeGeeks, Could you please release a video about how to launch BeyBlades with metal bits or Metal Needle, so that bladers don't damage stadiums? I remember you suggested that bladers can launch properly without damaging the stadium.
2:07 that just looks like it’s gonna destroy your stadium 😭
Literally wat I was thinking
The title tho. Also 29 MINS AGO?
i wonder if they would make a suction free spin bit as well.... X version of Quest?
First video I see in years and this what you posting 😭
U tryna clickbait us? Vuz u know it goddam works on me😂
You guys really are geeks💀💀🙏🙏
Make a beyblade burst tournament with the recommended combos
BeybladeFreaks 😳
FRR
what if instead of beybladegeeks they were called beybladefreaks 👅
3:34 - as cool as it is, I genuinely hope Takara Tomy doesn't make that a thing again. I know this is different from Burst but I don't want the Beyblade X meta to turn out to be as stamina dominant as Burst was near the end. That sh*t was boring af.
I'm trying to figure out if these are legal for play.
definitely not!
Not true, We allow 3d printed beyblade parts in tournaments. I guess @BeybladeGeeks don't go to beyblade X tournaments run by other real bladers. And not tournaments from that garbage WBO website. But here in the USA 🇺🇸 we have tournaments that allow 3D printed parts and they are way more fun.
Stiff and hard? Sounds like me 24/7 💀
AYOOOOOO WHAT?!
Brooo i only hit cuz the title
Edit:but it really shows how carefully takara tomy engineered tips are. They might seem simple but as you see in the video and many other 3d printer beytubers. They mostly suck.
Road to 2mil 🗣️🗣️🔥🔥
Hear me out, wouldn't it be so cool if there was a release of beyblade x with titanium blades? They will be more durable and they spark when clashing.
the stadium 💀
That was insane ideia from the creator lol
Beyblade Freaks
I made my own driver but the screw that cause the extreme dash is unfinish so it can dash itself out mid dash
that hairstyle is diabolical
Is the stadium still alive? 😂
If I'm in the EU (Netherlands) what would be the best website to get Takara tomy Beyblade X beyblades? Without too much shipping costs nd stuff? is there an EU site?
Or should I just get the hasbro ones? because I heard the beyblades themselves are relatively the same as the Takara Tomy ones, only the arena's are different (?) supposedly. Right?
Anyway if someone could point me in the right direction of where to get Takara Tomy if its more of the real deal than Hasbro 's. But yeh preferably also with decent shipping costs n what not.
not sure the fully rubberized tip is optimal for extreme dash cause of the different friction between the tip + stadium and gear + extreme line. i think its a bit redundant to put high friction tip in x beys
I got my own custom beyblade made by them!
Yooooooo
That's so cool🎉
the rubber flat tip is wayy too wide it should be smaller like the beyblade burst extreme driver or right rubber flat from galaxy
where do you guys buy your beyblades?
So cool 😎
Ayo we need WHAT!? 😫🤨
you heard us 😏
Bro has the wind breaker haircut
Poor stadium suffers from those stiff hard tips/bits
I want the bearing flat tip
Yeah i already got a stiff, hard tip..
Also where do i get those drivers??
BeybladeFreaks
Do we have rubber bits officially in the anime?
Wouldn’t the metal needle destroy your stadium
The title tho is funny
Day 18 of telling the BeybladeGeeks that I love their content! ✴️
You don't want a full metal bit due to weight distribution. You want as much weight as possible on the outside edges of the beyblade. Having a low center of gravity does help, although with the bit being 1/3 of the weight of a shield, that's just too much.
THE TITLE?????
Dont be scared add the ruber flat to pegasus
BROOOO A CUSTOM UNITE FOR X GEN???!??
And there goes even more of my money
ooo new video
STIFF 💀 HARD 😭 TIPS 💀😭😭😭
STIFF AND HARD TIPS!?
Can you do whale wave vs phoenix wing
Bro the title💀
bbgs are u ok... are the bits full of lead...
Cool.
the title is really pushing it
Is this tournament legal?
Not really, we have started allowing 3D printed beyblade parts in tournaments. TT is to blame for not releasing more parts. Plus, 3D printed parts make Beyblade X more fun and level the playing field. No more spamming Wizard Rod in tournaments.