Turning Nuts and Bolts into Solid Steel with 300 TON Hydraulic Press
HTML-код
- Опубликовано: 21 май 2024
- 🌏 Get exclusive NordVPN deal here ➵ NordVPN.com/hydraulicpress It’s risk free with Nord’s 30 day money-back guarantee!✌
Can you press steel screws or bolts and nuts back to solid piece of metal using our new 300 ton hydraulic press? We will find out that on this experiment!
You can now buy your own hydraulic press through us! Press inquiries hpc@profipress.info
Here is the link where you can check out standard Profi Press models rhtc-workshoppress.com/ and if you need special custom made machine just send email and Profi Press engineers will design machine that suits your needs.
Our second channel / @beyondthepress
Our fan shop www.printmotor.com/hydraulicp...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell 
Наука
Thanks for NordVPN for sponsoring this video! And you should be this time extra thankful since we have been so busy on making the bunker etc. that I couldn't get this month's sponsored video out in time with making this extra video! 🌏 Get exclusive NordVPN deal here ➵ NordVPN.com/hydraulicpress It’s risk free with Nord’s 30 day money-back guarantee!✌
I feel like you should paint the wall behind the new press, pale green, as it is a nice neutral colour [better than concrete] that shows up crushed items very nicely... I always liked the green background behind the small press too. :)
32mm Lexan for armoured vehicles will stop a .357 Magnum at point blank range. Pretty sure that would cover any explosive force that the 300 tonne press may create. I would feel safe behind it.
I used to retrofit it to armoured vehicles here in Australia to replace the 19mm laminated glass used previously.
Impressive how you can milk 10+ minutes out of 2 minutes of content
amazing
you could make Damascus steel from this result
You should make a video compressing HDD's and title the video "300 TON Data Compression".
I like this
@@benbaselet2026 Or "World's slimmest hard drive", or "the safest data deletion method, ever" 😄
Witty. 😂 love it.
I support this suggestion.
@@giork2828 Work with a company that does data recovery to see if they can recover data from crushed hard drives.
Plant I work in uses a 6500 ton hydraulic press to make solid titanium bricks like this called "compacts." The titanium starts out looking like gravel and has other metal bits mixed with it to make the desired alloy and then compressed together in the compact.
Make a. Video bud
I can't wait for the extruder videos
I try to get first one out next week!
@@HydraulicPressChannel hooray!!
3:08 “yeah, this is still quite scary” made me laugh pretty good
Seeing the old press made me fill nostalgic. You should paint the wall behind the new one green with some yellow hight voltage stickers.:)
The Profi Press should be renamed "Stuckinator Nine Million" !
“Can you make it into Rawk by crushing the Sheet out of it”
😂love it
I have been watching your shit a lot 7-8 and kinda phased out of it but the new press and the behind the scenes about it made me come back and almost watch every video in the recent weeks. It's such a cool channel.
Let’s go hydraulic press 500 million!
Try making that crazy special type of ice again!!!!
I have to get first the bunker built. But after I got that done I will start to build tools for this. It's not going to be easy even with the bigger press :D
There will be problems with sealing but with good enough precission you can do it!@@HydraulicPressChannel
Diamonds would also be cool! 300tons is it enough for that with help of high heat from oxyace torch?
You should take them back to the shop you bought them from and say there was a problem with them, wait for their reaction 😂
haha, the shop would say:
"mita vittua sina vedat multa?"
It's good to see that the old press still has a role to play.
Nut Cakes (TM Hydraulic Press Channel), the best training snacks for Iron Giant.
Gtfoh with that tm crap
For unsticking your creations have you thought about adding a hydraulic fitting on the bottom and you could use one of your extruders connected to force it out hydraulically.
A little bit like with blind bearings.
Wall-e would be proud of that result!
can you make red glowing steel bolts in to a solid rock?
Turning steel to rock would be quite the alchemists job.
No doubt
Would be cool though, but I think it's impossible to convert steel to any mineral
Aw it's nice to hear the old press fire up! This really is the best channel on the 'tube, best wholesome fun to be had. Cheers.
Love the new press and bunker! I can’t wait to see what you will do with them 😁
Always a good idea to watch an HPC video if you're having a bad day.
What a great series title, love it
I think it's safe to say, most of us here are for those little candid moments of mild panic they have during the pressing process....These two are freaking legends (him and his wife that is)
It is midnight and I'm laughing at this despite having to call ambulance earlier today for my back pain. I have had to fight with things like you around the 5 minutes and this is so entertaining. At least you're getting paid and making good content out of it.
Another Hydraulic Press video to begin my day ❤
So cool to see the case of things !
_"We're going to press pretty goddamn hard..."_
I *love it* when Lauri gets all scientific on us! 😊
I just realized, have you ever done one showing what happens to different types of wood? Like comparing the soft pine wood vs. oak or even ebony!!! ❤❤❤❤
They have
such a manly coaster. I'd buy one if you put some up for merch!
Can you still chew salmiakki that has been pressed by 300 ton press?
You, Sir, are asking the REAL question!
would be interesting to see thru a thermal camera
Excellent Video! Fun!
I would love to see thermal camera imaging of the stuff under pressure. They heat up, and it would be super cool to see where and how!
very cool display case.
Was nice to see the old stuff you crushed again.
This is great! It's like in DBZ where they level up and your like no way. This channel leveled up with the new press.
its a winter nutty bolt cake ...love it .
great fun
Those cakes of bolts gonna look like some art materials that can fit certain themes
These presses are quite useful.
Need to resin these pucks!
Please try the next one with 10.9 / 12.9 bolts :-)
YES! I can't wait to see all the wild shit you do with this press. Hopefully the bunker will protect the windows from any flying brass :D
That was so awesome 👌. 😊
Would be interesting to see the temperature of the material being compressed as pressure increases for different materials. keep pressing on.
Amazing video 👍🏻love the new “nutcake”😂
Best of luck 🍀with the new press. 300 tons is a lot of weight.
Nice!
I bet those would make some crazy artillery slugs
Plz crush ball bearings agin with the new press lol that was my favorite episode. I still say “vutt the fuuuck” lmao
BREAKING (news): those bolts were already, literally, solid steel
It's always fun here.
That was a serious Finland crapping on Romania LOLOL
Chuck it in the lathe next? Or have Pommijätkät try to disassemble it, fairly rapidly?
Damn! Needing the Old Press to un-stuck whatever the New Press deforms or breaks is quite telling of the New Press's power!
You look so god damn finish, I love it.
I like your videos! 🙂
I have an idea. You should try and make a popcorn ball with a hydraulic press. More like a popcorn puck but you get the idea.
Alright, hold onto your hats, because this is the whirlwind saga of me, a madcap genius with a 300-ton hydraulic press, wrestling the universe itself! I've got steel bolts, folks, and I'm not afraid to use 'em. I toss them in like they're confetti at the world's most bonkers party, and I'm ready to crush. It's me versus metal in the ultimate showdown.
I slam down with the fury of a thousand suns, cranking up the power to "obliterate." I'm looking for that sweet spot, where bolts become rocks, and sanity becomes an afterthought. It's a high-octane, no-holds-barred dance with destiny. And what do I get? A stubborn, stuck clump of defiance. It's laughing in the face of my efforts!
But do I back down? Not a chance! I double down, crafting hardware steel like a blacksmith on a mission, all to unstick this beast. And finally, victory! A nutcake denser than the core of the Earth itself, a testament to sheer willpower and a bit of madness.
In the end, it's a tale of man vs. metal, a saga of triumph and the most stuck part known to RUclips. I'm left standing, a wild-eyed conqueror with a hydraulic press, thinking, "Is this not the pinnacle of human achievement?" And to that, I say, "Absolutely." It's intense, it's insane, it's a rollercoaster of steel and pressure. And I wouldn't have it any other way.
I want a series “making hockeypuck and seeing if you can play with it”!
You could try that with stainless steel bolts. They are softer and they stick/weld together if you tighten them too much
This is Nuts!
“Can You Make it a Rock by Crushing the Shit Out of it?”
Best show
I think you could get better adhesion if you start with uncoated (non-galvanized) screws and give them a quick acid wash before pressing. You certainly have a lot of oxides between the screws that limit cold welding.
You should get these set in resin to keep them intact while still able to view everything.
What would happen when pressing different items in a vacuum? Illustrating metals welding together in space with sufficient force without the oxidation layer.
Other than crushing things, this channel is also a testament to the guy's english, some years ago it was choppy, now he stumbles but non that often 10/10
And how is your Finnish...?
@@bror8228lighten up tiger. He's literally complimenting the guy.
Awesome
I think you should try it again but with stainless steel nuts and bolts. We all know how stainless steel nuts and bolts love to cold weld themselves together, so i wonder if it would do the same under such high pressure?
What do you think about putting some WD 40 inside before the crush? Maybe it will not get stuck as much.
Large ceramic bearing ball needs a rematch.
Should give it to a gun channel. Homemade body armor test. Awesome channel 👍
Seriously you should talk to Matt from Demolition Ranch do a collaboration to see what not bullet proof things can be made bullet proof by crushing!
spotted the piece of brass that broke the window in the display case
It needs to be narrower, so that the nuts and bolts have a smaller surface area to sustain the pressure.
I wonder if you etched the parts in muriatic acid or something just before pressing them if they would stick together better? Or heat them up to 200 or 300C and then press??
I hope you have a nice day as well
You should set up an on-line store... I'd buy one of those squashed nuts and bolts disks... it would make a great paperweight or a birthday gift 🙂
I wish you guys had a thermocouple stuck in the middle of the bolts so we could see how hot it gets inside. Might be a fun video series too...
Cold forging!
09:28 can you "compress" steel under pressure and with high(er) temperatures at the same time?
I always wonder what is next! BTW - NordVPN user since 2019!
Please try a gigantic lump of hard oak or ash. Preferably with very evenly cut sides. Wood explosions are the best!
I'm glad HPC has been going throughout the years, but I miss the bits at the end where they'd squish the extremely dangerous play-doh creations.
I wonder what you guys do with the machine shop
I think, using a forge and bit of flux will result much more funny video 🔥🔨
Well, thats the first time ive seen someone cold rivet steel. Lol, as soon as the rod started to deform, i knew the sledge hammer was coming out.
Beyonders Rule! We haven't seen any explosions for far too long. But what i really can't wait for is the bunker build video where the windows go in. It freaks me out every time you turn on the new press and squish something dangerous!
Oh, you said "bolts", I thaught you said "balls". 🤣 Could be fun to see what happens with a "bunch" of ball bearings as well I guess, that have a tendency to explode. 👌
I'd like to see this happen with nuts and bolts heated up with a blow torch for a while first. Not molten, but red hot if possible.
9:51 Nut cake > cream pie.
Can you do an aluminium square like the sphere just repeatedly crush more and more foil on each side to get as good as cube you can make will the sides be smooth like the sphere
Awesome 👍 It's like a breakfast cereal biscuit for robots. You could call it Nuts & Bolts. And have Original and Grease Flavour.
🤖👍
That machine is brutal, holy shit. 300 tons in that one piston. And you choose the surface area. The upcoming extruder iterations will be insane, you'll squeeze an entire animal carcass through a 1mm hole with this thing for lulz
Looking at the shelf of memories made me miss the "extremely dangerous and we must deal with it"
Have you tried pressing sand together? Maybe you can create sandstone.
You should send this block to a black Smith channel and have them make a Damascus steel block out of it. Im so curious how it would look
"You said bolts, there are also washers in there!" "That's only because I didn't have time to clean the bolts." "Oh, I see...hey, wait a minute"
Please bring back the extra content!
The bridge-testing was very interesting. Perhaps it deserves a continuation, but it needs to be combined with proper scaling.
The problem with the previous bridges that were tested was that it was unrealistic if scaled up to the real world and thus the test results meant nothing.
The difficulty is to not use concrete because you can't get it thin and functional enough when scaled down.
Maybe the bridge testing was overall a bit silly and more of a trial run without being too serious, I understand that. But it felt like it could use some realism to spice it up.
Will the new press be able to make ice 9? Or was it ice 7? The stable one that you were trying to get.
Nice
8:35 you ate too much cheese and now have to work through it
Do you or would you sell a bolt cake? That’s cool AF.
Can you without heat, fold and forge steel into Damascus-like properties?