Thanks for the toroid...I mean toe-roid information. My first ever concert was Iron Maiden in Oxford, England in 1982 (my old man was in the Air Force).
Great video❗️Sometimes I have a hard time finding out which toroid I need for the UNUN I want to build, do you have suggestions for the 1/1, 9/1, 49/1 and 64/1 I was looking for some at the Orange Ham Fest in SE Texas and didn’t see a single one ☝️. Thanks for your Great Videos. 73 KV5P
Thanks Mike, glad you liked it. I use ferrite cores for what you have listed not the powdered iron cores. For a 1:1 I would use mix 31 and mix 43 for the others. 👍
Nice one Ape. In the UK I usually use Mouser or RS electronics. On something slightly different, have you seen this video? If so whats your thoughts? I want to build another smaller EFHW and thinking about this core and winding. 73 ruclips.net/video/-Wm27Jpcq7I/видео.html
Hey Colin, O did see that some time ago but haven’t tried the smaller core. I guess I have to add that to the list. I have used Mouser in the past but only for stuff that was hard to find. 👍
I would highly recommend Bob at Balun Designs. Get guy who knows his stuff. I like Amidom too great people. Sadly the one I highly DO NOT recommend is Palomar, total rip off. I spent 1xx.xx on a multi tap balun 4:1/9:1 and it had 4 tiny little cores with ?Able size wire 18 Awg rated at 1kw plus which we all know is crap. I ve also herd same kinda bad stuff from others that bought 3/5kw balun that melted down under 1kw
@@TheSmokinApe I understood but wanted to point out to folks. I also recommend a qst I will post the # great write up on how not to burn your balun. Has lots of great info on vswr and what a feeder n toe roids can Handle.
great reference websites, thank you!
Thanks for watching Gap 👍
thank you lots of good info.
Glad it was helpful, thanks for watching.
Great video
Thanks Thump 👍
JPM Supply for the win! Good info Ape!
No doubt!
Toe Roids!!. Thanks Ape. This is a much needed resource. Thanks
Thanks for watching Don 👍
Great information 👍
Thanks is for watching Paul 👍
Thanks man. Good info.
Thanks for watching David 👍
Great video thanks Ape
Thanks for checking it out Andy 👍
Thanks for the toroid...I mean toe-roid information.
My first ever concert was Iron Maiden in Oxford, England in 1982 (my old man was in the Air Force).
You bet 45, I bet that was a good time!
I did have this question!♡ thank you ❤
Glad it was helpful Aname, thanks for watching 👍
Usually the problem is how to get rid of Roids, but glad to see a video on where to get them! Thanks Ape
They have a cream for that! Thanks for watching Hayden 👍
Hhahahahaha :)
Great video❗️Sometimes I have a hard time finding out which toroid I need for the UNUN I want to build, do you have suggestions for the 1/1, 9/1, 49/1 and 64/1 I was looking for some at the Orange Ham Fest in SE Texas and didn’t see a single one ☝️. Thanks for your Great Videos. 73 KV5P
Thanks Mike, glad you liked it. I use ferrite cores for what you have listed not the powdered iron cores. For a 1:1 I would use mix 31 and mix 43 for the others. 👍
@@TheSmokinApe THANKS
Thanks
Ape’s vid is Eddie approved….73!!!
Haha!
9:1 on 43 ?
Yes
JPM supply appears to be KAPUT. :(
Yeah, that recently happened which is a shame.
Nice one Ape. In the UK I usually use Mouser or RS electronics. On something slightly different, have you seen this video? If so whats your thoughts? I want to build another smaller EFHW and thinking about this core and winding. 73 ruclips.net/video/-Wm27Jpcq7I/видео.html
Hey Colin, O did see that some time ago but haven’t tried the smaller core. I guess I have to add that to the list. I have used Mouser in the past but only for stuff that was hard to find. 👍
I would highly recommend Bob at Balun Designs. Get guy who knows his stuff. I like Amidom too great people. Sadly the one I highly DO NOT recommend is Palomar, total rip off. I spent 1xx.xx on a multi tap balun 4:1/9:1 and it had 4 tiny little cores with ?Able size wire 18 Awg rated at 1kw plus which we all know is crap. I ve also herd same kinda bad stuff from others that bought 3/5kw balun that melted down under 1kw
Hey Kevin, Balun Designs are good folks. I was talking more from just buying toroids or “parts” not so much antennas, you make a good point though. 👍
@@TheSmokinApe I understood but wanted to point out to folks. I also recommend a qst I will post the # great write up on how not to burn your balun. Has lots of great info on vswr and what a feeder n toe roids can Handle.
@@kevinkc3onohelijeepworld953 gotcha, thanks man 👍
@@TheSmokinApe need you email to forward if this doesn’t lead you to it “How to blow up your balun”
By Dean Straw, N6BV Sea-Pac June 7, 2014
I got it Kevin, www.seapac.org/seminars/2014/sea-pac2014-n6bv-Blow%20Up%20Your%20Balun%20with%20RG-303.pdf
Thanks!
Great information. Thank you!
Glad it was helpful, thanks for watching K.C.