This unit comes with an alarm system, so when it's time to change the filter, it will start beeping. I think it's about every six months or so. I usually turn off the alarm and keep on using the filters for a few months more because when I test the water, it seems to be pretty clean.
Hello Automight, Would you show us how to adjust the water temperature! I followed the instruction but the but it seems the up arrow or down arrow button not really activated after being press and hold down for longer than 3 seconds as it said!!! Thanks in advance!
Yes, I use a 3 gallon one until it fills up then I water the plants with that water. You can use a 5 gallon one so it doesn't fill up as fast. Just be careful not to let it get too close to full because if you fill a cup with water, the filtration process will start and the waste water won't stop coming out for a while.
There is no need to flush the RO filter that's why it doesn't fit. That filter works differently so flushing it is not needed. Their instructions are terrible that's why people are having problems.
@@automight1615 thank you soo very much I tried other methods listed online and none of them worked cant believe it was that simple just holding the up button for a few seconds this is going to save a lot of people a lot of headaches thank you very much for your quick response also!😁👍🙏
It means that the ambient air sensor is not working. You have to check to make sure the plug is clean and firmly plugged in. If it's not clean, you can try cleaning it. If that doesn't work, you can order a new one and replace it.
I bought one of these 2 years ago and now it won't dispense any water... 350 dollars to waste I contacted Brio and they won't do anything to help. I called everywhere around me looking for someone who works on them but couldn't find anyone who will work on them... complete BS
I’m so glad you mentioned those things in your review. Thank you.
How often do you suggest the filter be changed?
This unit comes with an alarm system, so when it's time to change the filter, it will start beeping. I think it's about every six months or so. I usually turn off the alarm and keep on using the filters for a few months more because when I test the water, it seems to be pretty clean.
Hello Automight,
Would you show us how to adjust the water temperature! I followed the instruction but the but it seems the up arrow or down arrow button not really activated after being press and hold down for longer than 3 seconds as it said!!!
Thanks in advance!
So you can use a jug for the waste water instead of drilling a hole on drain tubes?
Yes, I use a 3 gallon one until it fills up then I water the plants with that water. You can use a 5 gallon one so it doesn't fill up as fast. Just be careful not to let it get too close to full because if you fill a cup with water, the filtration process will start and the waste water won't stop coming out for a while.
How did u filter RO filter with the filteration head provided? The RO filter does not fit in that head
There is no need to flush the RO filter that's why it doesn't fit. That filter works differently so flushing it is not needed. Their instructions are terrible that's why people are having problems.
@@automight1615 thank you :)
Hi Automight I have a brio moderna and its been good but it just started the annoying beeping alarm may I ask how did you reset the alarm please?
If I remember correctly...you have to press the up arrow button for a few seconds until it turns off.
Press and hold.
@@automight1615 thank you soo very much I tried other methods listed online and none of them worked cant believe it was that simple just holding the up button for a few seconds this is going to save a lot of people a lot of headaches thank you very much for your quick response also!😁👍🙏
@@ArtEatSan Welcome, anytime. 😊
@@automight1615just helped me silence the awful beeping too. Came home at 230am from work to a beeping cooler. You saved the day!
Does the control lights stay on at night ? Or you cant see at night unless pressed?
There is a switch on the back so you can turn on the night light. Once you turn it on, the night light will always be there so you can see.
How much do the replacement filters cost?
It's $130 directly from Brio for 4-stage systems.
I am getting err f6 what is it mean?
It means that the ambient air sensor is not working. You have to check to make sure the plug is clean and firmly plugged in. If it's not clean, you can try cleaning it. If that doesn't work, you can order a new one and replace it.
I bought one of these 2 years ago and now it won't dispense any water... 350 dollars to waste I contacted Brio and they won't do anything to help. I called everywhere around me looking for someone who works on them but couldn't find anyone who will work on them... complete BS
Mine just stopped working too after 3 years
You change the filters? The sediment filter especially is gonna clog eventually (they are not that great)
why are you wearing gloves ?
I always wear gloves...in every video. Not sure why though.😀