Lexus IS200 - IS300 Toyota Altezza -- customize Headlights - How make it Black
HTML-код
- Опубликовано: 17 янв 2020
- Project Toyota Altezza -- custom Headlights - How make it Black
Lexus IS200 - IS300 / Toyota Altezza / SXE10 - GXE10 - JCE10
Project Altezza -- Build up
In this video this , how make it the orignial Toyota Altezza - Lexus IS200 - IS300 Headlight Black.
I used for the video a old Headlight from my Altezza.
_________________________________________________________________
In diesem Video das, wie es der originelle Toyota Altezza - Lexus IS200 - IS300 Scheinwerfer Schwarz macht.
Ich habe für das Video einen alten Scheinwerfer von meiner Altezza verwendet.
powered by: east alps custom
regards DRFT Авто/Мото
Awsome that the projectors and indicator are separate, perfect headlight to do this.. no masking required!
thanks a lot g, if someone wondering i puted lamp in the heated oven, 150 celcius for 6 minutes
Worked for me...looking great
Very helpful for my 3d project. This 1 video beats all photo references
Thank you legend!!!!
Beautiful video man. So at the end you placed them in the oven. What exact steps did you take? Are you using more glue? Were they together or separate?
200c or 200f?
Where to get original IS200 lamps? Please HELP!!! Your headlights is in perfect condition! I am looking for a left pre-lift to the EU and i can't find it and if they do it they cost 1/5 the price of my car.
200 Celsius or Fahrenheit? I melted my lights with 200c
Hey hat das schon einer mit den Xenon‘s gemacht und kann mir mit Rat und Tat zur Seite stehen?
Please update and denote the oven temperature in degress Fahrenheit or Celsius/ Centigrade so people don't burn their house down.
how did u seal those headlights back together? any sort of sealant used
He re-used the original one by putting it in the oven to make the glue stick to the front
Hi!
Where you bought the clear turn signal lens?
He didn't buy a clear one, he just removed the old one and left it empty.
@@shizukesajdm
Thanks. 🙂
200 degrees celcius or ferenhite ?
If that was celcius that would be almost 400 degrees Fahrenheit and I don't think you'd want the headlights to be baked at that temperature. Doubt they could handle that heat. Remember you're just making the adhesive soften.
Bake at 160 degrees celcius at roughly 7-10 minutes👌
What grit of sand paper did you use ?
It’s a steel wool.
@@typesgsr It's not, it's scotch-brite.
You cracked the lense??
Brent Strong yup he did, I’d suggest a heat gun around the edge rather than baking it 🙌🏻
@@johnmendoza9906 he cracked it
@@clov3zz860 it was sealant that got onto the lens. When he cleaned it, it came off.
watch the whole video before commenting
The bake cracked the lense
I think its melted glue that run down the lens. Because in the end there are no cracks in the lens.
you cracked the lense :(
it looks like the sealant glue has got on the front from his gloves id say.