Its so nice to wake up in the morning and find your vid up!! Thanks again..i'm gonna tell all my fishing buddies to subscribe to your channell!! Can't wait to start putting this reel back together!!
Michael, I think you want to ask Tackle Advisors for that review. That is his expertise. My channel is more about fishing videos as well as kayak modifications, etc
Well, for a few weeks I've been eyeing a tatula or Fuego, but after seeing this, I think I'll look for alternatives. Great video but sounds like a huge hassle.
Great videos, do you have any video that shows how the "Brake click sping" goes in on a Diawa Tatula SV TW? I can make it click for a few clicks then nothing until the last few click. Thanks Greg
Hello cool videos you are making, it is possible to make one on a Daiwa Viento HD, how to disassemble and service, and what you think about the wheel, best regards Torben
yes sir ,my lexa 400 got pulled into the shore pound by a pelican. the entire reel had to be disassembled and cleaned. Had to take the mags apart. this video covers the reassembly except for the click spring. For the life of me I can't get it back together . That click spring is really necessary the mag won't work without it. can you help me?
Thank you for doing this video. The outer magnet on my Lexa 400 is crumbling and I need to replace it. I have been trying to find out how to remove it from the side plate. This video is what I have been searching for. Do you know if this is a common issue?
Any idea how to glue back the inner magnet ring of Daiwa newer range? no indicator shown from the magnet afraid will affect the polarity position. Please help......
I bought a used Daiwa reel from a friend a year ago. My f/rod fell on the water during surf fishing. Sands and salt water intrusion got into the mechanism. Can you please show how to assemble the reel. I don’t have the schematic diagram when I bought it. Thank you very much.
Yo yo , how can I tighten the dial on my tatula ? Every time I set the hook my hand moves the dial , it's kinda loose. I tightened the screw , but it didn't do much. thanks brudda.
How do you know if the Magnets are broken. Will it backlash at 20? Can you visibly see the magnets broken? I did the Brent Ehrler side to side tuning with brakes at 20 and when i try to hail mary it, it just blows up. Do you know why? Some people tell me that the SV TWS aren't supposed to launch but lobbed casted because the spool will lock up? What do you think the problem is?
The only negative I can find with Daiwa reels with a rotor cup that moves in and out is some can remain stuck inward... Which can cause a blow up.. Sv spools are excellent casters.. At a setting of 7 or above they're easy and controllable.. 5 throws far while still offering some control... 4 and below gets squirrely... Broken magnets are rare... Often you'll see a crack
I have a question about the braking system on my tatula type r. How do I put back in my silver clip retainer underneath my breaking dial? And then putting the dial back on. What number should the pointer be on?
I have the new style and have an issue with the brakes stuck on. I pulled it apart and the magnet doesnt have a mark or referene point as to where it goes. Still not casting properly
That's what I thought, I just didn't want to damage anything by forcing it, I'll just leave it be for now I've only had it for 6 months with minimal use. I am glad I decided to clean it though they put a pretty good amount of grease in mine from the factory.
Its so nice to wake up in the morning and find your vid up!!
Thanks again..i'm gonna tell all my fishing buddies to subscribe to your channell!!
Can't wait to start putting this reel back together!!
Nice ! i don't know how people can do this without seeing a video instruction like this first.
Fish Finder can you do a review of the daiwa coaster tws?
Thanks
Michael, I think you want to ask Tackle Advisors for that review. That is his expertise. My channel is more about fishing videos as well as kayak modifications, etc
You just showed me what is wrong with the Procaster that I bought off ebay! THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!
Just saved me some money thanks bro 🤙🏽 u just got a new subscriber
Well, for a few weeks I've been eyeing a tatula or Fuego, but after seeing this, I think I'll look for alternatives. Great video but sounds like a huge hassle.
Great videos, do you have any video that shows how the "Brake click sping" goes in on a Diawa Tatula SV TW? I can make it click for a few clicks then nothing until the last few click. Thanks Greg
Good explanation video man. Thanks
Hello cool videos you are making, it is possible to make one on a Daiwa Viento HD, how to disassemble and service, and what you think about the wheel, best regards Torben
Hi Is it a good idea to put a film of oil on the inductor that fits inside of the magnets? I’ve always done so but decided I’d ask 😀
yes sir ,my lexa 400 got pulled into the shore pound by a pelican. the entire reel had to be disassembled and cleaned. Had to take the mags apart. this video covers the reassembly except for the click spring. For the life of me I can't get it back together . That click spring is really necessary the mag won't work without it. can you help me?
Hi, I have a diawa steez 100HA that has a broken inner magnet. Do you know where I could get a replacement magnet?
Thank you for doing this video. The outer magnet on my Lexa 400 is crumbling and I need to replace it. I have been trying to find out how to remove it from the side plate. This video is what I have been searching for. Do you know if this is a common issue?
Any idea how to glue back the inner magnet ring of Daiwa newer range? no indicator shown from the magnet afraid will affect the polarity position. Please help......
I bought a used Daiwa reel from a friend a year ago. My f/rod fell on the water during surf fishing. Sands and salt water intrusion got into the mechanism. Can you please show how to assemble the reel. I don’t have the schematic diagram when I bought it. Thank you very much.
Where do I find replacement magnets? They don't show the magnets in the daiwa parts diagrams.
Yo yo , how can I tighten the dial on my tatula ? Every time I set the hook my hand moves the dial , it's kinda loose.
I tightened the screw , but it didn't do much. thanks brudda.
Would this same thing apply to the early model Daiwa Procaster Magforce PMF 1000??
How do you know if the Magnets are broken. Will it backlash at 20? Can you visibly see the magnets broken?
Hello mam just wondering where to purchase the magnetic ring
Hi nice vidz..i had a problem on the clicker dial brake.When i set the dial to 4 it kinda fall back to 7.What may be the caused??thanks..
It’s not clicking once I put it back , it just shoots forward to 10 it won’t stay on any number ? Bad magnetic pieces ?
I have magnetic dial click slippery on daiwa alphas. Can you teach me how to solve it?
How do you know if the Magnets are broken. Will it backlash at 20? Can you visibly see the magnets broken?
I did the Brent Ehrler side to side tuning with brakes at 20 and when i try to hail mary it, it just blows up. Do you know why? Some people tell me that the SV TWS aren't supposed to launch but lobbed casted because the spool will lock up? What do you think the problem is?
The only negative I can find with Daiwa reels with a rotor cup that moves in and out is some can remain stuck inward... Which can cause a blow up.. Sv spools are excellent casters.. At a setting of 7 or above they're easy and controllable.. 5 throws far while still offering some control... 4 and below gets squirrely... Broken magnets are rare... Often you'll see a crack
Tackle Advisors Thak you so much👍
I have a question about the braking system on my tatula type r. How do I put back in my silver clip retainer underneath my breaking dial? And then putting the dial back on. What number should the pointer be on?
Sorry can't help ya on that. It's a feel sorta thing. Go one way then the other... Then meet in the middle
Because there’s an inside track and there’s outside track for that clip I’ve tried a lot
I have the new style and have an issue with the brakes stuck on. I pulled it apart and the magnet doesnt have a mark or referene point as to where it goes. Still not casting properly
Not sure on your reel... I mark with a sharpie any parts that look to be oriented specifically prior to removal
OMG.
Is the bearing itself removable? I took the clip out but it just does not want to come out.
+TheBushwooky it's very tight
That's what I thought, I just didn't want to damage anything by forcing it, I'll just leave it be for now I've only had it for 6 months with minimal use. I am glad I decided to clean it though they put a pretty good amount of grease in mine from the factory.
How to replace the brake dial then?
You need a new dial? Hmm good question
@@TackleAdvisors yes my alphas sv brake dial crack so i been wondering how replace it
Great video
Thank you
Ples seting daiwai tatula 103😅
Thks 🤦🏼♂️ bero
thanks save my ass
Polarity