Visual Studio Productive Tips Duplicate line: CTRL +D Delete line: CTRL + SHIFT + L Selecting all instances of word: ALT + SHIFT + .(period) and then pressing .(period) repeatedly Vertical Selection: Hold down Alt Key and making the selection with either the mouse or keyboard. To create multiple cursors in arbitrary locations: CTRL + Alt + Click Cut Entire Line: CTRL + X Comment: CTRL + [K, C] Un-Comment: CTRL + [K, U] Add Line Above: CTRL + Enter Below: CTRL + SHIFT + Enter Rename (Anything): CTRL + [R, R] Go To Definition: F12 Find All References: SHIFT + F12 Refactor to Method: CTRL + [R, M] Move Code Up: ALT + UpArrow Down: / ALT + DownArrow Format Document: CTRL + [K, D] Surround with Snippet: CTRL + [K, S] Collapse Class to Definitions: CTRL + [M,M] for collapsing one method and CTRL + [M, O] for all methods Organize Using Statements: CTRL + [R, G] Quick Fix (Add Methods, implement interface, etc): CTRL + . (period) Solution Explorer: CTRL + ALT + L Search to class or file: CTRL + ; Unity Project Explorer: SHIFT + ALT + E Creating Code Snippets: Creating Constructor: type ctor and then hit the tab Creating Properties: type prop and then hit the tab Creating Properties with full set and get snippets: type propfull and then hit the tab Creating try catch block: type try and then hit the tab Creating try finally block: type tryf and then hit the tab Switching between tabs: CTRL + tab Switch to next Tab: CTRL + F6 Switch to previous tab: CTRL + Shift + F6 Closing tab: CTRL + F4 Closing all tabs: ALT + [W,L] ; Opening file without using solution explorer: CTRL + , (comma)
1:03 to select multiple lines, it is more convenient to hold the LMB (left mouse button) and select line numbers on the left side of the lines (works in all IDEs)
As someone who has been coding for 20 years, these shortcuts are very valuable. Keep them in a notebook, notepad, OneNote, etc. These will help you and don't worry about not remembering every single little trick. No one knows everything or can remember everything even if you use them on a daily basis. I'm also sure there are more than listed here but either way, this is very helpful to everyone coding. Get in those practices and habits. It will save you time and probably money in the long run.
So true! Definitely found that confusing when I first looked up shortcuts. I was trying to keep my stuff similar to the official documentation- but should have totally addressed it in the video.
Instead of f12 to jump to definition you can cntrl + left click on the instance. Thanks for the video, had no idea about the latter half on the video. Cheers.
Thanks for the video I also find CTRL + ALT + LMB and ALT + SHIFT + ARROW UP / DOWN very useful to add multi-carets for typing the same thing on multiple lines.
- Great. I learned about the new line above and below from this video, and now I will use it a lot. - About comments, I use the toggle command. "Ctrl + Shift + ;" or "Ctrl + K, Ctrl + ;". About renaming I use F2.
Why CTRL R + CTRL R opens some stupid window for renaming instead of acting like shown in the video? (CTRL R + R does nothing) (Running VS 2022 community)
Plenty of these that I haven't even thought about. Thanks! Another useful one is holding Alt while clicking and dragging to edit multiple lines at once. For example changing a group of private variable to public, or making the all static. Works with cut and paste too
Your video is so so helpful! You doing fantastic work on editing videos. It is so nice and easy to understand. The video that is divided into parts is so powerful. I came back already 4 times to find a shortcut - and it was so easily! Big Thanks!
Short question to the renaming (from 1:53). Say I copy a method or an event handler with the same text and just rename the method (e.g. a textBox event with some input logic) and I want to change only the names of the events in the new method/event. If I type Ctrl+R Ctrl+R it would change not only change the names in the method I am typing, but also the names of the method where I copied the code from. Is there any option available to change only the names in the current method?
Programmable (split, ortho etc) keyboards like corne make you way more powerful here. You can have a layer with all these shortucts on and have multiple presses (eg ctrl+k, ctrl+d) as a single keypress. Next level and way more ergo than 1890s QWERTY keyboards.
Visual Studio Solution Explorer has a search bar, usually accessed with Ctrl+; (that's ctrl+semi-colon). It has had a search since 2012 so might want to check your install or do a reset? Unsure how to bring it back if it gets broken :/
Ha! I can't say I'm surprised I screwed that up. Can't spell for the life of me. Once spelled my own middle name wrong on a middle school student ID. Oops.
QUICK Unfortunate Note - On Shift-F12? I THINK. (HATE remembering these.) This shows you all the calling classes, and SOME versions, think this was a pro only feature. You have it in your video, shows all the calling Functions. 2 References public static vcid RequestPickup(... Prob a BAD example but without the static you can do this for Buttons for instance. 0 references. public void Clicked_RequestPick(... This does NOT mean there are zero references, it COULD include OnClick events. I WISH there was a way for Visual Studio to track ALL those links. Would make me want to use them more and make them more useful.
On MS Visual Studio 2022 if we rename a variable by pressing CTRL + R twice, it shows up a classic style dialogue box preventing from directly type the new name in the text editor. Is it possible to have it like yours where you keep writting the on text editor?
Options... -> Text Editor -> C# -> Advanced -> Find "Rename" and under the "Where should the rename UI be shown?" chose "Show UI as a dashboard in top right"
I've used the Mac version and it is VERY different. I don't think it's community version vs. some other. The mac version is fairly new (just a couple years old) and very different.
@@OneWheelStudio It does feel like it was created by a separate team. One annoyance for me in VS is auto-complete, it can be a hindrance as much as a help at times. I used IntelliJ Idea for years and I think I got a bit spoiled by it, VS feels like a step backwards when it comes to focusing on developer productivity.
It can be a bit aggressive. Though I’m the newest version on the pc side it’s written complete functions for me and sometimes it’s almost spooky how good it is.
Why are you saying: Ctrl D + Ctrl K? What does this mean? They both do the same thing? You have to do one then the other? If the latter what effect does each one have? Not clear.
Snippets!! ctrl(cmd) + shift + p search for Configure user snippets > New global snippets file In between the brackets, you can enter something like what's below "pyfor": { "prefix": "pyfor", "body": [ "${2:items} = [\"RED\", \"GREEN\", \"BLUE\"]", "", "for ${1:item} in ${2:items}:", "\tprint($1)", "$0", ], "description": "For loop in python" }, After you save this file, anywhere you enter they keys pyfor > enter the above code will not only be populated but the $1 and $2 tells your cursor where to go when the tab key is hit. Whole programs can be written in a few keystrokes. Brilliant!
![Unity async / await: Coroutine's Hot Sister [C# & Unity]](http://i.ytimg.com/vi/WY-mk-ZGAq8/mqdefault.jpg)
Visual Studio Productive Tips
Duplicate line: CTRL +D
Delete line: CTRL + SHIFT + L
Selecting all instances of word: ALT + SHIFT + .(period) and then pressing .(period) repeatedly
Vertical Selection: Hold down Alt Key and making the selection with either the mouse or keyboard.
To create multiple cursors in arbitrary locations: CTRL + Alt + Click
Cut Entire Line: CTRL + X
Comment: CTRL + [K, C]
Un-Comment: CTRL + [K, U]
Add Line Above: CTRL + Enter
Below: CTRL + SHIFT + Enter
Rename (Anything): CTRL + [R, R]
Go To Definition: F12
Find All References: SHIFT + F12
Refactor to Method: CTRL + [R, M]
Move Code Up: ALT + UpArrow
Down: / ALT + DownArrow
Format Document: CTRL + [K, D]
Surround with Snippet: CTRL + [K, S]
Collapse Class to Definitions: CTRL + [M,M] for collapsing one method and CTRL + [M, O] for all methods
Organize Using Statements: CTRL + [R, G]
Quick Fix (Add Methods, implement interface, etc): CTRL + . (period)
Solution Explorer: CTRL + ALT + L
Search to class or file: CTRL + ;
Unity Project Explorer: SHIFT + ALT + E
Creating Code Snippets:
Creating Constructor: type ctor and then hit the tab
Creating Properties: type prop and then hit the tab
Creating Properties with full set and get snippets: type propfull and then hit the tab
Creating try catch block: type try and then hit the tab
Creating try finally block: type tryf and then hit the tab
Switching between tabs: CTRL + tab
Switch to next Tab: CTRL + F6
Switch to previous tab: CTRL + Shift + F6
Closing tab: CTRL + F4
Closing all tabs: ALT + [W,L] ;
Opening file without using solution explorer: CTRL + , (comma)
imtiaz bhai jazakAllah
This is the most useful 12 minutes I've watched in a long time. Thank you for making this video!
1:03 to select multiple lines, it is more convenient to hold the LMB (left mouse button) and select line numbers on the left side of the lines (works in all IDEs)
That is amazing! Had no idea. Love it.
or just select start, move mouse to the end and hold shift + LMB
The code generator text like prop, ctor, for, foreach, etc with the Tab+Tab is often overlooked but super useful.
Oh yeah! Easily missed by folks and oh so useful!
As someone who has been coding for 20 years, these shortcuts are very valuable. Keep them in a notebook, notepad, OneNote, etc. These will help you and don't worry about not remembering every single little trick. No one knows everything or can remember everything even if you use them on a daily basis. I'm also sure there are more than listed here but either way, this is very helpful to everyone coding. Get in those practices and habits. It will save you time and probably money in the long run.
search to class or file in vs use CTRL + ;
it opens explorer in search field and you can start typing the class name
Thanks, very useful video!
Great video! Thanks for all the great tips.
To clarify: It's not necessary to press CTRL twice. Just hold it. The rest are sequential.
CTRL + K + C
So true! Definitely found that confusing when I first looked up shortcuts. I was trying to keep my stuff similar to the official documentation- but should have totally addressed it in the video.
Instead of f12 to jump to definition you can cntrl + left click on the instance. Thanks for the video, had no idea about the latter half on the video. Cheers.
Thanks for the video
I also find CTRL + ALT + LMB and ALT + SHIFT + ARROW UP / DOWN very useful to add multi-carets for typing the same thing on multiple lines.
- Great. I learned about the new line above and below from this video, and now I will use it a lot.
- About comments, I use the toggle command. "Ctrl + Shift + ;" or "Ctrl + K, Ctrl + ;". About renaming I use F2.
Cut Entire Line: CTRL + X
Comment / UnComment: CTRL + [K, C] / CTRL + [K, U]
Add Line Above/Below: CTRL + Enter/CTRL + SHIFT + Enter
Rename (Anything): CTRL + [R, R]
Go To Definition: F12
Find All References: SHIFT + F12
Refactor to Method: CTRL + [R, M]
Move Code Up/Down: ALT + Up / ALT + Down
Format Document: CTRL + [K, D]
Surround with Snippet: CTRL + [K, S]
Collapse Class to Definitions: CTRL + [M, O]
Organize Using Statements: CTRL + [R, G]
Quick Fix (Add Methods, implement interface, etc): CTRL + . (period)
Solution Explorer: CTRL + ALT + L
Search to class or file: CTRL + ;
Unity Project Explorer: SHIFT + ALT + E
Thank you!
Why CTRL R + CTRL R opens some stupid window for renaming instead of acting like shown in the video? (CTRL R + R does nothing)
(Running VS 2022 community)
You can also use "CTRL + /" to comment and uncomment lines of codes
Quick Fix: CTRL + . (period). You can also use "Alt + Enter" instead, feel it easier to press.
Plenty of these that I haven't even thought about. Thanks!
Another useful one is holding Alt while clicking and dragging to edit multiple lines at once. For example changing a group of private variable to public, or making the all static. Works with cut and paste too
I remember seeing that one, but couldn't find it. Thanks!
Some brains don't work like others.
Control-R, Control-M
I get HOW we get here, but WOW.
Control-Refactor, Control-Method
MUCH easier to remember.
How do I change the selection of the suggested word from the tab or shift button in Visual Studio Community?
Find all references! Holy crap I needed that tip thanks
Wow you are really changing the way I approach coding, thanks!
Awesome! All the good "cuts" in one place!
Awesome stuff! It always baffles me how fast you can make a workflow change!
Great tutorial!
I would like to add one:
ctrl + click on a idendifier executes also "Go to Definition"
I’m working from my laptop this week and don’t have my macro keys. So now this is extra helpful!😎
that was the most useful video for the year, thanks a lot
1:48 Shift + Enter is enough to add a new lkne below the current one, thabks for the Ctrl + Enter I didn't know that
Amazing should have known these 20 years ago, this is a great use for layer 3 on my corne....
to find function/file/class within our outside current project, better to use (ctrl + , ) then type function name, it even supports fuzzy search
Instead of CRTL+RR you can also press just F2 to rename. By the way it works as well in Unity for renamin files.
Very helpful video for visual studio, thanks for your help tips
Super useful shortcuts, thank you !
In many situations you don't need to press CTRL twice. For exampe CTRL K and then CTRL D, you can just do CTRL K + D.
We can also use F2 for renaming.
This is actually a fairly standard keybind across most programs for renaming. Very helpful to know.
Your video is so so helpful! You doing fantastic work on editing videos. It is so nice and easy to understand. The video that is divided into parts is so powerful. I came back already 4 times to find a shortcut - and it was so easily! Big Thanks!
Wow! It was really useful time! Thanks!
Nice video. Thanks.
Masterpiece. Thanks. 👍🏻👍🏻👍🏻
This is gonna save me so much hassle
This is gold!!! thanks a lot!
I like Shift + Delete to delete an entire line
my fav are alt+up to move blocks of text, or ctrl+.
Oh man, thank you for this!
Short question to the renaming (from 1:53). Say I copy a method or an event handler with the same text and just rename the method (e.g. a textBox event with some input logic) and I want to change only the names of the events in the new method/event. If I type Ctrl+R Ctrl+R it would change not only change the names in the method I am typing, but also the names of the method where I copied the code from. Is there any option available to change only the names in the current method?
Thank you so muchhh
Programmable (split, ortho etc) keyboards like corne make you way more powerful here.
You can have a layer with all these shortucts on and have multiple presses (eg ctrl+k, ctrl+d) as a single keypress. Next level and way more ergo than 1890s QWERTY keyboards.
Visual Studio Solution Explorer has a search bar, usually accessed with Ctrl+; (that's ctrl+semi-colon). It has had a search since 2012 so might want to check your install or do a reset? Unsure how to bring it back if it gets broken :/
It’s the Unity explorer that doesn’t have a search bar. I so wish it did.
Weird that no one hasn't commented about you spelling CTRL wrong for about 20 times in this video 😄
Ha! I can't say I'm surprised I screwed that up. Can't spell for the life of me. Once spelled my own middle name wrong on a middle school student ID. Oops.
I just realise that
QUICK Unfortunate Note - On Shift-F12? I THINK. (HATE remembering these.)
This shows you all the calling classes, and SOME versions, think this was a pro only feature.
You have it in your video, shows all the calling Functions.
2 References
public static vcid RequestPickup(...
Prob a BAD example but without the static you can do this for Buttons for instance.
0 references.
public void Clicked_RequestPick(...
This does NOT mean there are zero references, it COULD include OnClick events.
I WISH there was a way for Visual Studio to track ALL those links.
Would make me want to use them more and make them more useful.
Just pinging yt algorithm because I like your channel
Thank you!
My brain exploded with Alt up shortcut
One of my favorite!
I don't know about unity specific but
Ctrl+shift+t searches for files.
Ctrl+q searches for settings.
Wow that was great
On MS Visual Studio 2022 if we rename a variable by pressing CTRL + R twice, it shows up a classic style dialogue box preventing from directly type the new name in the text editor. Is it possible to have it like yours where you keep writting the on text editor?
Hey, did you find a solution to this?
@@mikipompon2024 No.
Options... -> Text Editor -> C# -> Advanced -> Find "Rename" and under the "Where should the rename UI be shown?" chose "Show UI as a dashboard in top right"
Ctrl + Shift + H
For renaming is more accurate , cause the ctrl + r + r doesn’t rename all occurrences
Drag to move is a better way to move text than the keyboard IMHO
Thanks
Thanks.
I use most of these but there seems to be a lot of differences on the Mac, or is that due to me using the Community edition?
I've used the Mac version and it is VERY different. I don't think it's community version vs. some other. The mac version is fairly new (just a couple years old) and very different.
@@OneWheelStudio It does feel like it was created by a separate team. One annoyance for me in VS is auto-complete, it can be a hindrance as much as a help at times. I used IntelliJ Idea for years and I think I got a bit spoiled by it, VS feels like a step backwards when it comes to focusing on developer productivity.
It can be a bit aggressive. Though I’m the newest version on the pc side it’s written complete functions for me and sometimes it’s almost spooky how good it is.
amazing
I really enjoy changing my clothes and unshaving.
I wondered if anyone would catch that! 😛
7:25 so how r we gonna re-open those again ?
CRTL + M,P to expand all.
www.visualstudiotips.co.uk/tip/expand-collapse-all/
@@OneWheelStudio thank you
Error: Add line above is shift enter not ctrl enter
Why are you saying: Ctrl D + Ctrl K?
What does this mean? They both do the same thing? You have to do one then the other? If the latter what effect does each one have? Not clear.
please any these shortcut key write notepad
Neat
Ctrl + - : Navigate Back
Lol sorry to notice but you wrote CRTL insted of CTRL on all the examples. CRTL = CTRL;
Much respect. Video was very helpful.
10 sec version of this video: Use Rider! :)
Add line above adds a line BELOW if you're at the end of the row. Broken feature.
Snippets!!
ctrl(cmd) + shift + p search for Configure user snippets > New global snippets file
In between the brackets, you can enter something like what's below
"pyfor": {
"prefix": "pyfor",
"body": [
"${2:items} = [\"RED\", \"GREEN\", \"BLUE\"]",
"",
"for ${1:item} in ${2:items}:",
"\tprint($1)",
"$0",
],
"description": "For loop in python"
},
After you save this file, anywhere you enter they keys pyfor > enter the above code will not only be populated but the $1 and $2 tells your cursor where to go when the tab key is hit. Whole programs can be written in a few keystrokes. Brilliant!
Thanks!